[OpenSIPS-Users] gsm modem SMS module

[Bogdan-Andrei Iancu]

HI Volga,

The SMS module was written maybe more than 15 years ago, maybe some 
things changed in the meanwhile - this is the reason more marking the 
module as obsolete as (a) there was no reason/need/interest for it and 
(b) it was not maintained in these last 15 years.

Regards,

Bogdan-Andrei Iancu

OpenSIPS Founder and Developer
   https://www.opensips-solutions.com
OpenSIPS Summit, Amsterdam, May 2020
   https://www.opensips.org/events/Summit-2020Amsterdam/
OpenSIPS Bootcamp, Miami, March 2020
   https://opensips.org/training/OpenSIPS_Bootcamp_2020/

On 1/8/20 8:52 PM, volga629 at networklab.ca wrote:
> Hello Bogdan,
> Yes I think module need to be refactored , I can't get any useful 
> information from debug. All what I see that opensips access modem, but 
> actually it can't pass even init properly. I tested with kannel and it 
> works 100%.
>
> I used command lsof -u opensips | grep -i usb that show me that 
> opensips keep device open.
>
> volga629
>
> On Sat, Jan 4, 2020 at 17:35, Bogdan-Andrei Iancu 
> <bogdan at opensips.org> wrote:
>> You should see some DBG log with "opening modem" - this is the very 
>> beginning of the modem init sequence. Try to grab all the logs (from 
>> the same proc) starting with that line.
>>
>> Regards,
>> Bogdan-Andrei Iancu
>>
>> OpenSIPS Founder and Developer
>>    https://www.opensips-solutions.com
>> OpenSIPS Summit, Amsterdam, May 2020
>>    https://www.opensips.org/events/Summit-2020Amsterdam/
>> OpenSIPS Bootcamp, Miami, March 2020
>>    https://opensips.org/training/OpenSIPS_Bootcamp_2020/
>>
>> On 1/4/20 5:19 PM, volga629 at networklab.ca wrote:
>>> In debug level 4 I see
>>>
>>> Jan  4 12:15:43 sms opensips: Jan  4 12:15:43 [21648] 
>>> ERROR:sms:initmodem: Modem is not registered to the network
>>> Jan  4 12:15:43 sms opensips: Jan  4 12:15:43 [21648] 
>>> INFO:sms:put_command: Modem is not clear to send
>>> Jan  4 12:15:43 sms opensips: Jan  4 12:15:43 [21649] 
>>> DBG:freeswitch:apply_socket_commands: applying FS socket commands
>>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>>> INFO:sms:put_command: Modem is not clear to send
>>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>>> WARNING:sms:checkmodem: modem wants the PIN again!
>>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>>> WARNING:sms:checkmodem: re -init the modem!!
>>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>>> INFO:sms:initmodem: init modem ZTE on /dev/ttyUSB1.
>>> Jan  4 12:15: 44 sms opensips: Jan  4 12:15:44 [21649] 
>>> DBG:freeswitch:apply_socket_commands: applying FS socket commands
>>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>>> INFO:sms:put_command: Modem is not clear to send
>>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>>> INFO:sms:initmodem: INFO:initmodem: Checking if Modem is registered 
>>> to the network
>>>
>>> But not really true, because wvdialconf is report ok
>>>
>>> [root at sms ~]# wvdialconf
>>> Editing `/etc/wvdial.conf'.
>>>
>>> Scanning your serial ports for a modem.
>>>
>>> Modem Port Scan<*1>: S0   S1   S2   S3
>>> ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>>> ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
>>> ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>>> ttyUSB1<*1>: ATQ0 V1 E1 -- OK
>>> ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
>>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
>>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>> ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
>>> ttyUSB1<*1>: Speed 9600: AT -- OK
>>> ttyUSB1<*1>: Max speed is 9600; that should be safe.
>>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>> ttyUSB2<*1>: ATQ0 V1 E1 -- OK
>>> ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
>>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
>>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>> ttyUSB2< *1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
>>> ttyUSB2<*1>: Speed 9600: AT -- OK
>>> ttyUSB2<*1>: Max speed is 9600; that should be safe.
>>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>>
>>> Found a modem on /dev/ttyUSB1.
>>> Modem configuration written to /etc/wvdial.conf.
>>> ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>> ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>>
>>> volga629
>>>
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20200109/1d97de87/attachment-0001.html>