[OpenSIPS-Users] gsm modem SMS module

volga629 at networklab.ca volga629 at networklab.ca
Wed Jan 8 13:52:08 EST 2020


Hello Bogdan,
Yes I think module need to be refactored , I can't get any useful 
information from debug. All what I see that opensips access modem, but 
actually it can't pass even init properly. I tested with kannel and it 
works 100%.

I used command lsof -u opensips | grep -i usb that show me that 
opensips keep device open.

volga629

On Sat, Jan 4, 2020 at 17:35, Bogdan-Andrei Iancu <bogdan at opensips.org> 
wrote:
> You should see some DBG log with "opening modem" - this is the very 
> beginning of the modem init sequence. Try to grab all the logs (from 
> the same proc) starting with that line.
> 
>  Regards,
> Bogdan-Andrei Iancu
> 
> OpenSIPS Founder and Developer
>   https://www.opensips-solutions.com 
> <https://www.opensips-solutions.com/>
> OpenSIPS Summit, Amsterdam, May 2020
>   <https://www.opensips.org/events/Summit-2020Amsterdam/>
> OpenSIPS Bootcamp, Miami, March 2020
>   <https://opensips.org/training/OpenSIPS_Bootcamp_2020/>
> 
> On 1/4/20 5:19 PM, volga629 at networklab.ca 
> <mailto:volga629 at networklab.ca> wrote:
>> In debug level 4 I see
>> 
>> Jan  4 12:15:43 sms opensips: Jan  4 12:15:43 [21648] 
>> ERROR:sms:initmodem: Modem is not registered to the network
>> Jan  4 12:15:43 sms opensips: Jan  4 12:15:43 [21648] 
>> INFO:sms:put_command <info:sms:put_command>: Modem is not clear to 
>> send
>> Jan  4 12:15:43 sms opensips: Jan  4 12:15:43 [21649] 
>> DBG:freeswitch:apply_socket_commands: applying FS socket commands
>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>> INFO:sms:put_command <info:sms:put_command>: Modem is not clear to 
>> send
>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>> WARNING:sms:checkmodem: modem wants the PIN again!
>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>> WARNING:sms:checkmodem: re -init the modem!!
>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>> INFO:sms:initmodem <info:sms:initmodem>: init modem ZTE on 
>> /dev/ttyUSB1.
>> Jan  4 12:15: 44 sms opensips: Jan  4 12:15:44 [21649] 
>> DBG:freeswitch:apply_socket_commands: applying FS socket commands
>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>> INFO:sms:put_command <info:sms:put_command>: Modem is not clear to 
>> send
>> Jan  4 12:15:44 sms opensips: Jan  4 12:15:44 [21648] 
>> INFO:sms:initmodem <info:sms:initmodem>: INFO:initmodem 
>> <info:initmodem>: Checking if Modem is registered to the network
>> 
>> But not really true, because wvdialconf is report ok
>> 
>> [root at sms ~]# wvdialconf
>> Editing `/etc/wvdial.conf'.
>> 
>> Scanning your serial ports for a modem.
>> 
>> Modem Port Scan<*1>: S0   S1   S2   S3
>> ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>> ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
>> ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>> ttyUSB1<*1>: ATQ0 V1 E1 -- OK
>> ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>> ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
>> ttyUSB1<*1>: Speed 9600: AT -- OK
>> ttyUSB1<*1>: Max speed is 9600; that should be safe.
>> ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>> ttyUSB2<*1>: ATQ0 V1 E1 -- OK
>> ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>> ttyUSB2< *1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
>> ttyUSB2<*1>: Speed 9600: AT -- OK
>> ttyUSB2<*1>: Max speed is 9600; that should be safe.
>> ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>> 
>> Found a modem on /dev/ttyUSB1.
>> Modem configuration written to /etc/wvdial.conf.
>> ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>> ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>> 
>> volga629
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20200108/d2dad552/attachment-0001.html>


More information about the Users mailing list