[OpenSER-Users] Openser and Nokia E61

Christian Schlatter cs at unc.edu
Wed Dec 19 21:13:36 CET 2007


David Villasmil Govea wrote:
> Ravi or Juha,
> 
>      if you've connected E61 succesfully, could you post the parameters 
> here? I just can't...

First, make sure that you're running the latest firmware relaese. For 
the e61, it should be 3.0633.09.04. You can check that on 
http://europe.nokia.com/A4577224.

The nokia e61 SIP configuration is very confusing and does not follow 
the common logic. First you have to configure so called access points 
which are basically IP network configurations. Then you need to add SIP 
settings for *each* access point you plan to use your SIP phone. One 
would think that SIP settings are independent from network settings, but 
apparently not in the e61 world.

Then you need to add a 'SIP profile' that includes multiple SIP settings 
in order to use your SIP account with different network connections. Can 
it get more complicated than that?

Here are the settings I have on my E61:

Settings --> Connection --> SIP settings:

- profile name: any
- service profile: IETF
- default access point: any
- publice user name: sip:<username>@<domain>
- use compression: no
- registration: always on
- use security: no
- proxy server
-- proxy server address: sip:<domain> (naptr/srv is supported)
-- realm: <domain>
-- username: <username>
-- password: xxx
-- allow loose routing: Yes
-- transport type: Auto (naptr is used)
-- port: 5060
- registrar server
-- registrar serv. addr.: sip:<domain>
-- realm: <domain>
-- username: <username>
-- password: xxx
-- transport type: Auto (naptr is used)
-- port: 5060

Settings --> Connection --> Internet tel. settings:
- Default
-- Name: Default
-- SIP profiles: <add all SIP accounts as defined above>

Also make sure that your access point setup is working fine by using 
e.g. the web browser.

/Christian






More information about the Users mailing list