[OpenSIPS-Users] need some help using opensips 3.0 cluster module .
Sasmita Panda
spanda at 3clogic.com
Wed Jul 17 08:19:05 EDT 2019
I am trying to follow the above link for clustering . But no success . I
must be doing something wrong .
I have 2 opensips node and using mongo db as cache_db and the cluster
module . there is a single mongo db in which both the nodes save data .
clusterer table looks like below .
mysql> select * from clusterer;
+----+------------+---------+-----------------------+-------+-----------------+----------+--------------+-------+-------------+
| id | cluster_id | node_id | url | state |
no_ping_retries | priority | sip_addr | flags | description |
+----+------------+---------+-----------------------+-------+-----------------+----------+--------------+-------+-------------+
| 1 | 1 | 1 | bin:172.21.5.95:5555 | 1 |
3 | 50 | 172.21.5.95 | seed | Node A |
| 2 | 1 | 2 | bin:172.21.13.73:5555 | 1 |
3 | 50 | 172.21.13.73 | seed | Node B |
+----+------------+---------+-----------------------+-------+-----------------+----------+--------------+-------+-------------+
call work fine .. both phone are registered through same server .
not working . both registered through different server .
I am not getting any error in the logs . How will I solve this ? Please do
help me .
*Thanks & Regards*
*Sasmita Panda*
*Senior Network Testing and Software Engineer*
*3CLogic , ph:07827611765*
On Wed, Jul 17, 2019 at 5:46 PM Sasmita Panda <spanda at 3clogic.com> wrote:
> I am trying to follow the above link for clustering . But no success . I
> must be doing something wrong .
>
> I have 2 opensips node and using mongo db as cache_db and the cluster
> module . there is a single mongo db in which both the nodes save data .
> clusterer table looks like below .
> mysql> select * from clusterer;
>
> +----+------------+---------+-----------------------+-------+-----------------+----------+--------------+-------+-------------+
> | id | cluster_id | node_id | url | state |
> no_ping_retries | priority | sip_addr | flags | description |
>
> +----+------------+---------+-----------------------+-------+-----------------+----------+--------------+-------+-------------+
> | 1 | 1 | 1 | bin:172.21.5.95:5555 | 1 |
> 3 | 50 | 172.21.5.95 | seed | Node A |
> | 2 | 1 | 2 | bin:172.21.13.73:5555 | 1 |
> 3 | 50 | 172.21.13.73 | seed | Node B |
>
> +----+------------+---------+-----------------------+-------+-----------------+----------+--------------+-------+-------------+
>
> > db.userlocation.find()
> { "_id" : "454545 at opensips.3c.com172.21.x.y", "home_ip" : "172.21.x.y",
> "aor" : "454545 at opensips.3c.com" }
> { "_id" : "3344 at opensips.3c.com172.21.x.y", "home_ip" : "172.21.x.y",
> "aor" : "3344 at opensips.3c.com" }
> call work fine .. both phone are registered through same server .
>
> > db.userlocation.find()
> { "_id" : "454545 at opensips.3c.com172.21.x.y", "home_ip" : "172.21.x.y",
> "aor" : "454545 at opensips.3c.com" }
> { "_id" : "3344 at opensips.3c.com172.21.x.x", "home_ip" : "172.21.x.x",
> "aor" : "3344 at opensips.3c.com" }
> not working . both registered through different server .
>
> 12 3.602658267 219.65.44.210 → 172.21.x.x SIP/SDP 1064 Request: INVITE
> sip:454545 at opensips.3c.com:5508 |
> 13 3.603565974 172.21.x.x → 219.65.44.210 SIP 446 Status: 100 Giving a
> try |
> 14 3.603633107 172.21.x.x → 172.21.x.y SIP/SDP 1231 Request: INVITE
> sip:454545 at opensips.3c.com |
> 18 4.074865764 172.21.x.x → 172.21.x.y SIP/SDP 1231 Request: INVITE
> sip:454545 at opensips.3c.com |
> 22 5.018386440 172.21.x.x → 172.21.x.y SIP/SDP 1231 Request: INVITE
> sip:454545 at opensips.3c.com |
> 29 7.025502596 172.21.x.x → 172.21.x.y SIP/SDP 1231 Request: INVITE
> sip:454545 at opensips.3c.com |
> 36 8.831041991 172.21.x.x → 172.21.x.y SIP 478 Request: CANCEL
> sip:454545 at opensips.3c.com |
> 37 9.332232752 172.21.x.x → 172.21.x.y SIP 478 Request: CANCEL
> sip:454545 at opensips.3c.com |
> 41 10.264532825 172.21.x.x → 172.21.x.y SIP 478 Request: CANCEL
> sip:454545 at opensips.3c.com |
> 49 12.271423465 172.21.x.x → 172.21.x.y SIP 478 Request: CANCEL
> sip:454545 at opensips.3c.com |
>
> I am not getting any error in the logs . How will I solve this ? Please do
> help me .
>
> *Thanks & Regards*
> *Sasmita Panda*
> *Senior Network Testing and Software Engineer*
> *3CLogic , ph:07827611765*
>
>
> On Tue, Jul 9, 2019 at 5:37 PM Vlad Patrascu <vladp at opensips.org> wrote:
>
>> Hi,
>>
>> I would advise to directly rely on the usrloc module for configuring
>> distributed user location, instead of manually scripting this using the
>> clusterer script functions.
>>
>> You can read more about this here:
>>
>> - usrloc module documentation [1]
>>
>> - federated user location tutorial [2] - this is for 2.4 but aside from
>> syntax changes, the config should be quite similar.
>>
>> [1]
>> https://opensips.org/html/docs/modules/3.0.x/usrloc.html#distributed-sip-user-location
>>
>> [2]
>> https://opensips.org/Documentation/Tutorials-Distributed-User-Location-Federation
>>
>> Vlad Patrascu
>> OpenSIPS Developerhttp://www.opensips-solutions.com
>>
>> On 07/09/2019 02:08 PM, Sasmita Panda wrote:
>>
>> Hi ,
>>
>>
>> I have followed the below link while configuring opensips 2.4
>>
>>
>> https://saevolgo.blogspot.com/2018/01/opensips-geo-distributed-clustering.html
>>
>>
>> Is there any document which I can follow for opensips 3.0 also . Please
>> let me know or provide any sample config file if possible .
>>
>> *Thanks & Regards*
>> *Sasmita Panda*
>> *Senior Network Testing and Software Engineer*
>> *3CLogic , ph:07827611765*
>>
>>
>> On Tue, Jul 9, 2019 at 4:27 PM Sasmita Panda <spanda at 3clogic.com> wrote:
>>
>>> Hi Vlad ,
>>>
>>> I got that and modified . Thanks for your reply .
>>>
>>> But I am facing some other problem now . Wherever I have written xlog
>>> to print some user defined logs these logs are not getting printed . I
>>> think I am doing some other mistakes in the config also .
>>>
>>> Can I get a sample config with cluster module enable for opensips 3.0 ?
>>> Earlier I have tested with 2.4 and it was working fine . But lots of things
>>> changed in 3.0 and so I am stuck .
>>>
>>>
>>> *Thanks & Regards*
>>> *Sasmita Panda*
>>> *Senior Network Testing and Software Engineer*
>>> *3CLogic , ph:07827611765*
>>>
>>>
>>> On Tue, Jul 9, 2019 at 4:05 PM Vlad Patrascu <vladp at opensips.org> wrote:
>>>
>>>> Hi Sasmita,
>>>>
>>>> The actual name of the parameter, as stated in the docs for
>>>> E_CLUSTERER_REQ_RECEIVED, is "msg". So you should access it by
>>>> *$param(msg)*.
>>>>
>>>> Regards,
>>>>
>>>> Vlad Patrascu
>>>> OpenSIPS Developerhttp://www.opensips-solutions.com
>>>>
>>>> On 07/08/2019 02:29 PM, Sasmita Panda wrote:
>>>>
>>>> event_route[E_CLUSTERER_REQ_RECEIVED]{
>>>> $avp(state) = $(param(rcv_msg){s.select,0,:});
>>>> $avp(user) = $(param(rcv_msg){s.select,1,:});
>>>> $avp(proxy) = $(param(rcv_msg){s.select,2,:});
>>>> xlog("L_INFO","[CLUSTER-TALK] {MSG:$avp(rcv_msg)} Sender
>>>> Proxy:$avp(proxy) SRC_ID:$avp(source_id) User: $avp(user) State:
>>>> $avp(state) ClusterId: $param(cluster_id)\n")
>>>> if($avp(state) =~ "REGOFFLINE") {
>>>> cache_raw_query("redis:group1","HDEL REGONLINE
>>>> $avp(user)");
>>>> }else if($avp(state) =~ "REGONLINE") {
>>>> cache_raw_query("redis:group1","HSET $avp(state)
>>>> $avp(user) $avp(proxy)");
>>>> }else if($avp(state) =~ "WHEREIS") {
>>>> route(QUERY_LOCAL_CACHE);
>>>> }else if($avp(state) =~ "HACKER"){
>>>> $avp(useragent) = $avp(user);
>>>> $avp(hacker_ip) = $avp(proxy);
>>>> xlog("L_INFO","[CLUSTER-TALK] HACKER IP DETECTED BY
>>>> CLUSTER ADDING $avp(hacker_ip) & User-Agent: $(avp(useragent){s.b64decode})
>>>> Into Watch-List\n");
>>>>
>>>> cache_raw_query("redis:group1","HSET
>>>> HACKER_USERAGENT_LIST $avp(useragent) $avp(hacker_ip)");
>>>> cache_raw_query("redis:group1","HSET HACKER_IP_LIST
>>>> $avp(hacker_ip) $avp(useragent)");
>>>> }
>>>>
>>>> exit;
>>>> }
>>>>
>>>> This is giving warning in opensips 3.0 as below .
>>>> *WARNING:event_route:event_route_param_get: Parameter <rcv_msg> not
>>>> found for event <E_CLUSTERER_REQ_RECEIVED>*
>>>>
>>>> * Due to this the data is not getting saved in the
>>>> subsequent node in the cluster . How I will fix this ? *
>>>>
>>>> *Thanks & Regards*
>>>> *Sasmita Panda*
>>>> *Senior Network Testing and Software Engineer*
>>>> *3CLogic , ph:07827611765*
>>>>
>>>>
>>>> On Thu, Jul 4, 2019 at 5:35 PM Sasmita Panda <spanda at 3clogic.com>
>>>> wrote:
>>>>
>>>>> Thank you for your quick response . I resolved it .
>>>>>
>>>>>
>>>>> *Thanks & Regards*
>>>>> *Sasmita Panda*
>>>>> *Senior Network Testing and Software Engineer*
>>>>> *3CLogic , ph:07827611765*
>>>>>
>>>>>
>>>>> On Thu, Jul 4, 2019 at 5:12 PM Liviu Chircu <liviu at opensips.org>
>>>>> wrote:
>>>>>
>>>>>> Hey Sasmita,
>>>>>>
>>>>>> I had a similar problem yesterday. In 3.0, fetch_event_params() was
>>>>>> removed, and you are
>>>>>> simply supposed to access your params via:
>>>>>>
>>>>>> $param(cluster_id), $param(src_id), $param(rcv_msg) and
>>>>>> $param(rcv_tag)
>>>>>>
>>>>>> Liviu Chircu
>>>>>> OpenSIPS Developerhttp://www.opensips-solutions.com
>>>>>>
>>>>>> On 04.07.2019 14:22, Sasmita Panda wrote:
>>>>>>
>>>>>> Hi All ,
>>>>>>
>>>>>> Previously I have used cluster module with opensips 2.4 and that was
>>>>>> working fine . Now I want to upgrade to opensips 3.0 . And there are lots
>>>>>> of parameter get changed in opensips 3.0 .
>>>>>>
>>>>>> Is there any documentation for cluster module in 3.0 . I need an
>>>>>> example for config file which I can use with opensips 3.0 .
>>>>>>
>>>>>> Now I am facing problem in bellow lines .
>>>>>>
>>>>>> event_route[E_CLUSTERER_RPL_RECEIVED]{
>>>>>>
>>>>>> fetch_event_params("$avp(cluster_id);$avp(src_id);$avp(rcv_msg);$avp(rcv_tag)");
>>>>>> $avp(state) = $(avp(rcv_msg){s.select,0,:});
>>>>>> $avp(user) = $(avp(rcv_msg){s.select,1,:});
>>>>>> $avp(proxy) = $(avp(rcv_msg){s.select,2,:});
>>>>>> xlog("L_INFO","[CLUSTER-TALK] Replying Proxy:$avp(proxy)
>>>>>> User: $avp(user) State: $avp(state) ClusterId: $avp(cluster_id) TAG:
>>>>>> $avp(rcv_tag) \n");
>>>>>> }
>>>>>>
>>>>>> fetch_event_params this is not present in opensips 3.0 . How I will
>>>>>> convert this so that it will support in opensips 3.0. Please do help me .
>>>>>>
>>>>>>
>>>>>> *Thanks & Regards*
>>>>>> *Sasmita Panda*
>>>>>> *Senior Network Testing and Software Engineer*
>>>>>> *3CLogic , ph:07827611765*
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at lists.opensips.org
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>
>>
>> _______________________________________________
>> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20190717/41f5f36d/attachment-0001.html>
More information about the Users
mailing list