[OpenSIPS-Users] presence blf

Sat Oct 27 15:34:34 EDT 2018

Is possible that issue in mid_registrar ? 
I adjusted fail route to 

failure_route[SUPPLY_AUTH] { 
if(uac_auth()) { 
append_branch(); 
t_relay(); 
} 
exit; 
and look like uac_auth() is never executed. 

volga629 

From: "Slava Bendersky" <volga629 at networklab.ca> 
To: "Bogdan-Andrei Iancu" <bogdan at opensips.org> 
Cc: "OpenSIPS users mailling list" <users at lists.opensips.org> 
Sent: Saturday, October 27, 2018 12:42:09 AM 
Subject: Re: [OpenSIPS-Users] presence blf 

Hello Bogdan, 
The issue that opensips is not handling user authentication, password is stored in 3cx. Is there are way set avp or into cache intial credentials ? 
I come up with something like this. 
My though was. 

modparam("uac_auth","auth_realm_avp","$avp(10)") 
modparam("uac_auth","auth_username_avp","$avp(11)") 
modparam("uac_auth","auth_password_avp","$avp(12)") 

route[PUBLISH_407] { 
if(is_method("PUBLISH") && has_body(" application/dialog-info+xm l") && $avp(DLG_dir)=="frompbx") { 
xlog("L_INFO", "[$rm] from $si\n"); 
t_on_reply("6"); 
} 

onreply_route[6] { 
if(is_method("PUBLISH") && t_check_status("407")) { 
xlog("L_INFO", "OnReply_Route6: [$rm] Direction: [FS ~> Client] asked for 407\n"); 
t_on_failure("SUPPLY_AUTH"); 
} 
} 

failure_route[SUPPLY_AUTH] { 
don't know how to supply credential yet 
uac_auth(); 
} 

volga629 

From: "Bogdan-Andrei Iancu" <bogdan at opensips.org> 
To: "OpenSIPS users mailling list" <users at lists.opensips.org>, "Slava Bendersky" <volga629 at networklab.ca> 
Sent: Friday, October 26, 2018 5:28:09 AM 
Subject: Re: [OpenSIPS-Users] presence blf 

Hi Slava, 

Sorry for the mistyping your name :D....one wrong character and something a bit weird resulted :D. 

Regards, 
Bogdan-Andrei Iancu

OpenSIPS Founder and Developer [ http://www.opensips-solutions.com/ | http://www.opensips-solutions.com ] OpenSIPS Bootcamp 2018 [ http://opensips.org/training/OpenSIPS_Bootcamp_2018/ | http://opensips.org/training/OpenSIPS_Bootcamp_2018/ ] 
On 10/26/2018 09:34 AM, Bogdan-Andrei Iancu wrote: 

Hi Slave, 

If you cannot do an IP authentication / whitelisting for OpenSIPS in 3CX, you could use the uac_auth module and the uac_auth() function to perform user side authentication in OpenSIPS. See 
[ http://www.opensips.org/html/docs/modules/2.4.x/uac.html | http://www.opensips.org/html/docs/modules/2.4.x/uac.html ] 
[ http://www.opensips.org/html/docs/modules/2.4.x/uac_auth.html | http://www.opensips.org/html/docs/modules/2.4.x/uac_auth.html ] 

Best regards, 
Bogdan-Andrei Iancu

OpenSIPS Founder and Developer [ http://www.opensips-solutions.com/ | http://www.opensips-solutions.com ] OpenSIPS Bootcamp 2018 [ http://opensips.org/training/OpenSIPS_Bootcamp_2018/ | http://opensips.org/training/OpenSIPS_Bootcamp_2018/ ] 
On 10/25/2018 09:49 PM, Slava Bendersky wrote: 

BQ_BEGIN

Hello Everyone, 
I am trying make BLF working and how opensips should handle PUBLISH where server reply 407 ? 
Do we need forward to end point ? 
Opensips send PUBLISH then 3CX send 407 and conversation done. 
Here some trace 

[root at aitossbc01 ~]# cat BLF.txt 
2018/10/25 12:22:19.148093 10.100.104.10:5060 -> 10.2.24.124:5060 
PUBLISH [ sip:120 at domain.tld:5060 | sip:120 at domain.tld:5060 ] SIP/2.0 
Via: SIP/2.0/UDP 10.100.104.10:5060;branch=z9hG4bK9f23.99096732.0 
To: [ sip:120 at domain.tld:5060 | sip:120 at domain.tld:5060 ] 
From: [ sip:120 at domain.tld:5060 | <sip:120 at domain.tld:5060> ] ;tag=4c20d2ebf66939afcc7c67fb6893f1be-672a 
CSeq: 10 PUBLISH 
Call-ID: [ mailto:0324183200c79905-20534 at 10.100.104.10 | 0324183200c79905-20534 at 10.100.104.10 ] 
Max-Forwards: 70 
Content-Length: 549 
User-Agent: OpenSIPS (3.0.0-dev (x86_64/linux)) 
Event: dialog 
Expires: 3601 
Content-Type: application/dialog-info+xml 

<?xml version="1.0"?> 
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" state="partial" entity= [ sip:120 at domain.tld:5060 | "sip:120 at domain.tld:5060" ] ><dialog id= [ mailto:0_3095066305 at 192.168.88.146 | "0_3095066305 at 192.168.88.146" ] call-id= [ mailto:0_3095066305 at 192.168.88.146 | "0_3095066305 at 192.168.88.146" ] direction="recipient"><state>confirmed</state><remote><identity> [ sip:221 at domain.tld:5060 | sip:221 at domain.tld:5060 ] </identity><target uri= [ sip:221 at domain.tld:5060 | "sip:221 at domain.tld:5060" ] /></remote><local><identity> [ sip:120 at domain.tld:5060 | sip:120 at domain.tld:5060 ] </identity><target uri= [ sip:120 at domain.tld:5060 | "sip:120 at domain.tld:5060" ] /></local></dialog></dialog-info> 

2018/10/25 12:22:19.198773 10.2.24.124:5060 -> 10.100.104.10:5060 
SIP/2.0 407 Proxy Authentication Required 
Via: SIP/2.0/UDP 10.100.104.10:5060;branch=z9hG4bK9f23.99096732.0 
Proxy-Authenticate: Digest nonce="414d53595bd1fbcb12:61835c52c28e8a89737c489e16fa5965",algorithm=MD5,realm="3CXPhoneSystem" 
To: [ sip:120 at domain.tld:5060 | <sip:120 at domain.tld:5060> ] ;tag=d9bb492f 
From: [ sip:120 at domain.tld:5060 | <sip:120 at domain.tld:5060> ] ;tag=4c20d2ebf66939afcc7c67fb6893f1be-672a 
Call-ID: [ mailto:0324183200c79905-20534 at 10.100.104.10 | 0324183200c79905-20534 at 10.100.104.10 ] 
CSeq: 10 PUBLISH 
User-Agent: 3CXPhoneSystem 15.5.15502.6 (15502) 
Content-Length: 0 

_______________________________________________
Users mailing list [ mailto:Users at lists.opensips.org | Users at lists.opensips.org ] [ http://lists.opensips.org/cgi-bin/mailman/listinfo/users | http://lists.opensips.org/cgi-bin/mailman/listinfo/users ] 

_______________________________________________
Users mailing list [ mailto:Users at lists.opensips.org | Users at lists.opensips.org ] [ http://lists.opensips.org/cgi-bin/mailman/listinfo/users | http://lists.opensips.org/cgi-bin/mailman/listinfo/users ] 

BQ_END

_______________________________________________ 
Users mailing list 
Users at lists.opensips.org 
http://lists.opensips.org/cgi-bin/mailman/listinfo/users 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20181027/1e265338/attachment.html>