[OpenSIPS-Users] What does exactally mean lots of warnings about timer_ticker in the log (OpenSIPS 2.1)?

Bogdan-Andrei Iancu bogdan at opensips.org
Tue Feb 23 23:22:29 CET 2016


Shortly, what Eric wants to say is that your timer interval to ping is 
too short to actually manage to ping all your contacts. Like you want to 
ping every 30 seconds, but to ping them all (one time) takes 40 seconds.

Regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com

On 23.02.2016 23:22, Eric Tamme wrote:
> Hey again Rodrigo,
>
> I had further discussions with Bogdan which I will summarize here in 
> an attempt to clarify.
>
> Because the new 2.x system is implemented as a reactor, the 
> implementation of timer based callbacks has changed.  There is a 
> single timer process who's only job is to keep track of jobs that are 
> to be scheduled, when it decides a job/callback needs to happen 
> because of the current time, it writes to a shared pipe which is read 
> by ALL other processes of the reactor.  Any reactor process that is 
> free, will take this callback off the pipe and run it.  In this way, 
> there is no way to actually block the timer process.
>
> However, what can happen, and what I believe you are seeing here is 
> that the timer process has not finished going through the list of 
> timer handlers and it should have started processing the list again 
> already - so the timer list scan is overlapping.
>
> I'm not 100% sure how this can happen, perhaps you have a very long 
> timer list and it is causing the timer process to fail to complete 
> before its next scheduled iteration - either than or it is not able to 
> write to the shared pipe for some reason.
>
> I would bring the question to either IRC, or to the devel list with as 
> much detail as possible.
>
> -Eric
>
>
> On 02/23/2016 01:59 PM, Rodrigo Pimenta Carvalho wrote:
>>
>> Ok Eric.
>>
>>
>> Thank you very much.
>>
>> I will analyze my OpenSIPS configuration and try to discover what 
>> action is causing the block situation.
>>
>>
>> Best regards.
>>
>>
>> RODRIGO PIMENTA CARVALHO
>> Inatel Competence Center
>> Software
>> Ph: +55 35 3471 9200 RAMAL 979
>>
>>
>> ------------------------------------------------------------------------
>> *De:* users-bounces at lists.opensips.org 
>> <users-bounces at lists.opensips.org> em nome de Eric Tamme 
>> <eric at uphreak.com>
>> *Enviado:* terça-feira, 23 de fevereiro de 2016 17:51
>> *Para:* OpenSIPS users mailling list
>> *Assunto:* Re: [OpenSIPS-Users] What does exactally mean lots of 
>> warnings about timer_ticker in the log (OpenSIPS 2.1)?
>> I was just speaking with bogdan, apparently i am wrong.  he said:
>>
>> "no, there is no way to do that, as right now any process (SIP 
>> worker) can execute (if free) the timer jobs, and the 
>> timer_partitions in TM has nothing to do with that change (in how 
>> timer jobs are executed)"
>>
>> So ... i guess you need to prevent any type of blocking operations ...
>>
>> -Eric
>>
>> On 02/23/2016 01:34 PM, Rodrigo Pimenta Carvalho wrote:
>>>
>>> Ok Eric.
>>>
>>> Thank you. I will try  this and see what will be the result.
>>>
>>> Thanks a lot.
>>>
>>>
>>> RODRIGO PIMENTA CARVALHO
>>> Inatel Competence Center
>>> Software
>>> Ph: +55 35 3471 9200 RAMAL 979
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *De:* users-bounces at lists.opensips.org 
>>> <users-bounces at lists.opensips.org> em nome de Eric Tamme 
>>> <eric at uphreak.com>
>>> *Enviado:* terça-feira, 23 de fevereiro de 2016 17:23
>>> *Para:* OpenSIPS users mailling list
>>> *Assunto:* Re: [OpenSIPS-Users] What does exactally mean lots of 
>>> warnings about timer_ticker in the log (OpenSIPS 2.1)?
>>> I believe this has been refactored under 2.X as a result ofthe async 
>>> work.  I think the new settings are "timer partitions" here is the 
>>> tm documentation discussing the timer partition setting: 
>>> http://www.opensips.org/html/docs/modules/2.1.x/tm.html#id294483
>>> tm Module - OpenSIPS 
>>> <http://www.opensips.org/html/docs/modules/2.1.x/tm.html#id294483>
>>> www.opensips.org
>>> TM module enables stateful processing of SIP transactions. The main 
>>> use of stateful logic, which is costly in terms of memory and CPU, 
>>> is some services inherently ...
>>>
>>>
>>>
>>> -Eric
>>>
>>> On 02/23/2016 12:57 PM, Rodrigo Pimenta Carvalho wrote:
>>>>
>>>> Hi Eric Tamme.
>>>>
>>>>
>>>> I have just searched about Timer in the module docs, but I didn't 
>>>> find any thing about how to manager Timers in OpenSIPS, as you 
>>>> commented.
>>>>
>>>> Do you know what part of the documentation tells about "dedicated 
>>>> timer processes"?
>>>>
>>>>
>>>> BTW, my project is embedded.
>>>>
>>>>
>>>> Any hint will be very helpful!
>>>>
>>>>
>>>> Thanks a lot!
>>>>
>>>>
>>>> RODRIGO PIMENTA CARVALHO
>>>> Inatel Competence Center
>>>> Software
>>>> Ph: +55 35 3471 9200 RAMAL 979
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> *De:* users-bounces at lists.opensips.org 
>>>> <users-bounces at lists.opensips.org> em nome de Eric Tamme 
>>>> <eric at uphreak.com>
>>>> *Enviado:* segunda-feira, 22 de fevereiro de 2016 14:35
>>>> *Para:* OpenSIPS users mailling list
>>>> *Assunto:* Re: [OpenSIPS-Users] What does exactally mean lots of 
>>>> warnings about timer_ticker in the log (OpenSIPS 2.1)?
>>>> Many things share the same timer, dialog expiration cleanup, 
>>>> userlocation cleanup, nathelper pings etc.  If one of the processes 
>>>> that is triggered by a timer route blocks for some period of time - 
>>>> aka a hung db query, it will cause the timer to "drift" and you 
>>>> will get logs indicating that a process that should have takeng X 
>>>> amount of time actually took Y amount of time - this is due to the 
>>>> blocking operation.
>>>>
>>>> I would suggest that you use dedicated timer processes for as many 
>>>> things as you can - dialog, tm etc. see the module docs for how to 
>>>> do this.
>>>>
>>>> -Eric
>>>>
>>>> On 02/22/2016 10:28 AM, Rodrigo Pimenta Carvalho wrote:
>>>>>
>>>>>
>>>>> Hi.
>>>>>
>>>>> The log of my OpenSIPS began to present thousands of warnings 
>>>>> similar to:
>>>>>
>>>>>
>>>>>
>>>>> "WARNING:core:timer_ticker: timer task <nh-timer> already 
>>>>> schedualed for 93991120 ms (now 248157560 ms), it may ove rlap.."
>>>>>
>>>>>
>>>>> What does exactly means it?
>>>>>
>>>>> Some discussions from the past said something about increasing the 
>>>>> number in the global variable "children".
>>>>>
>>>>>
>>>>> Should I change the number for children?  Before trying it i would 
>>>>> like to hear something about, just to know better what I'm going 
>>>>> to do.
>>>>>
>>>>>
>>>>> Any hint will be very helpful!
>>>>>
>>>>>
>>>>> Thanks a lot.
>>>>>
>>>>>
>>>>>
>>>>> RODRIGO PIMENTA CARVALHO
>>>>> Inatel Competence Center
>>>>> Software
>>>>> Ph: +55 35 3471 9200 RAMAL 979
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20160224/cc37832e/attachment-0001.htm>


More information about the Users mailing list