[OpenSIPS-Users] mi_json parameters format
Răzvan Crainea
razvan at opensips.org
Wed Sep 24 09:39:38 CEST 2014
Hi, Gary!
Actually I just realized that you are not passing the headers parameter
correctly. You separate the headers with comma, whereas they all should
be a single parameter.
Can you try the following command?
curl
"127.0.0.1:8888/json/t_uac_dlg?params=OPTIONS,sip:1000001115 at 10.0.0.30,.,.,From:
sip:1111111111 at 10.0.0.30\r\nTo:
sip:1000001115 at 10.0.0.30\r\nContent-Type: text/plain\r\n"
Best regards,
Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.com
On 09/23/2014 09:45 PM, Gary Nyquist wrote:
> Hi Răzvan,
> I tried enclosing with quotes; but it made no difference
> OPTIONS packet did not go out of the box.
> The log still shows the same:
> DBG:mi_json:mi_json_run_mi_cmd: command=t_uac_dlg accepts parameters
> DBG:mi_json:mi_json_run_mi_cmd: got string param [OPTIONS]
> DBG:mi_json:mi_json_run_mi_cmd: got string param
> [sip:1000001115 at 10.0.0.30]
> DBG:mi_json:mi_json_run_mi_cmd: got string param [.]
> DBG:mi_json:mi_json_run_mi_cmd: got string param [.]
> DBG:mi_json:mi_json_run_mi_cmd: got string param [From:
> sip:1111111111 at 10.0.0.30]
> DBG:mi_json:mi_json_run_mi_cmd: got string param [To:
> sip:1000001115 at 10.0.0.30]
> DBG:mi_json:mi_json_run_mi_cmd: got string param [Content-Type:
> text/plain]
> DBG:mi_json:mi_json_run_mi_cmd: got mi_rpl=[0x7fe1bdee44d0]
> DBG:mi_json:mi_json_answer_to_connection: building on page
> [0x7fe1bdd633b0:0]
> DBG:mi_json:mi_json_build_page: start
> DBG:mi_json:mi_json_build_content: start
> DBG:mi_json:mi_json_build_content: done
> DBG:httpd:answer_to_connection: MHD_create_response_from_data
> [0x7fe1bdd633b0:0]
> Any more tips?
> Thanks a lot.
> BR
> - Gary
> *Sent:* Tuesday, September 23, 2014 at 7:41 AM
> *From:* "Răzvan Crainea" <razvan at opensips.org>
> *To:* users at lists.opensips.org
> *Subject:* Re: [OpenSIPS-Users] mi_json parameters format
> Hi, Gary!
>
> Have you tried quoting the entire curl parameter using quotes?
>
> curl
> "127.0.0.1:8888/json/t_uac_dlg?params=OPTIONS,sip:1000001115 at 10.0.0.30,.,.,From:
> sip:1111111111 at 10.0.0.30,To: sip:1000001115 at 10.0.0.30,Content-Type:
> text/plain"
>
> Best regards,
> Răzvan Crainea
> OpenSIPS Solutions
> www.opensips-solutions.com
> On 09/22/2014 07:23 PM, Gary Nyquist wrote:
>
> Hi Răzvan,
> Thanks for the response.
> The "get_statistics" command works fine with the comma-separated
> params.
> Facing problem with 't_uac_dlg' command.
> Can't figure out how to pass the headers in the params.
> As per the 'tm' module doc:
>
>
> |t_uac_dlg|
>
> Generates and sends a local SIP request.
>
> Parameters:
>
> *
>
> /method/ - request method
>
> *
>
> /RURI/ - request SIP URI
>
> *
>
> /NEXT HOP/ - next hop SIP URI (OBP); use “.” if no value.
>
> *
>
> /socket/ - local socket to be used for sending the request;
> use “.” if no value.
>
> *
>
> /headers/ - set of additional headers to be added to the
> request; at least “From” and “To” headers must be specify)
>
> *
>
> /body/ - (optional, may not be present) request body (if
> present, requires the “Content-Type” and “Content-length” headers)
>
> I want to send (say) an OPTIONS packet.
> The following fifo commands works fine:
> opensipsctl fifo t_uac_dlg OPTIONS "sip:1000001115 at 10.0.0.30" . .
> "\"From: sip:1111111111 at 10.0.0.30\r\nTo:
> sip:1000001115 at 10.0.0.30\r\nContent-Type: text/plain\r\n"\"
> But, 'mi_json' command won't work.
> Have tried (without luck) with several permutations, including the
> follwoing:
> curl
> 127.0.0.1:8888/json/t_uac_dlg?params=OPTIONS,sip:1000001115 at 10.0.0.30,.,.,From:
> sip:1111111111 at 10.0.0.30,To:
> sip:1000001115 at 10.0.0.30,Content-Type: text/plain
> Have tried with url encoing the complete params query string; but
> no OPTIONS packet goes out.
> No errors in the log also (debug level 4).
> Any clues?
> Regards
> -Gary
> *Sent:* Monday, September 22, 2014 at 8:11 AM
> *From:* "Răzvan Crainea" <razvan at opensips.org>
> *To:* users at lists.opensips.org
> *Subject:* Re: [OpenSIPS-Users] mi_json parameters format
> Hi, Gary!
>
> As the documentation indicates, you should pass the parameters
> separated
> by comma. You can try something like this:
>
> curl "http://127.0.0.1:8888/JSON/get_statistics?params=tm:,dialog:"
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Solutions
> www.opensips-solutions.com <http://www.opensips-solutions.com>
>
> On 09/18/2014 11:41 PM, Gary Nyquist wrote:
> > Hi,
> >
> > I am trying to use the MI interface to generate SIP MESSAGE
> packets locally
> > and send out to remote SIP UA.
> >
> > The 'opensipsctl fifo' method works fine.
> > The 'mi_datagram' method works fine.
> >
> > But not able to make "mi_json" work with "t_uac_dlg".
> > Basically, can't figure out how the parameters for "t_uac_dlg"
> be formatted for the mi_json query.
> >
> > Reading the manual, I understand that the "parameters are to be
> comma-separated then URI-encoded."
> > The following working fine:
> > curl 10.0.0.30:8888/json/get_statistics?params=all
> >
> > But can't figure out how to pass the parameters for "t_uac_dlg"
> command.
> >
> > Any help / advice?
> >
> > Thanks
> > -Gary
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
> _______________________________________________ Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20140924/d6d827c2/attachment.htm>
More information about the Users
mailing list