[OpenSIPS-Users] 回复: 回复: 回复: Dialog Concurrency Control Issue.

Bogdan-Andrei Iancu bogdan at opensips.org
Tue Jul 15 11:26:22 CEST 2014


Because you need to have an "exit;" after the sl_send_reply():


                 if ($stat(active_dialogs)>=1){
                 sl_send_reply("503", "Service Unavailable");
*   exit;*
                 }

Otherwise the script execution will continue.

Regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com

On 15.07.2014 12:19, jing wrote:
> hi,Bogdan.
> I just want to limit the total number of active dialog. And now I 
> have 2 questions .
> I changed the script like this:
> if (is_method("INVITE")) {
>                 xlog("active dialog is $stat(active_dialogs)");
>                 xlog("dlgcount is $DLG_count");
>                 if ($stat(active_dialogs)>=1){
>                 sl_send_reply("503", "Service Unavailable");
>
>                 }
>                 # create dialog with timeout
>                 if ( !create_dialog("B") ) {
>                         send_reply("500","Internal Server Error");
>                         exit;
>                 }
>                 setflag(ACC_DO); # do accounting
>         }
> Then I started 3 dialog, they were all successful , but no 503 sent. 
> The log showed:
> active dialog is 2
> dlgcount is 2
> I used opensipsctl fifo command to show the dialog statistics, it showed
> dialog:active_dialogs = 3.
> 1.what is wrong in my script ?
> 2. How to end the dialogs which have been active long time ,but have 
> no response.
> Or is there other way to limit the total number of active dialog?
> I am a newbie to opensips,  would you please tell me more detailed advice?
> Very thanks!
> kind regards
>
>
> ------------------ 原始邮件 ------------------
> *发件人:* "Bogdan-Andrei Iancu"<bogdan at opensips.org>;
> *发送时间:* 2014年7月15日(星期二) 下午4:43
> *收件人:* "users"<users at lists.opensips.org>; "jing "<605507247 at qq.com>;
> *主题:* Re: [OpenSIPS-Users] 回复: 回复: Dialog Concurrency Control 
> Issue.
>
> Hi,
>
> I see you added the missing "exit" after the sl_send_reply() and you 
> do create the dialog for each INVITE (hopefully only for the initial 
> ones :) ).
>
> What seems to be the exact problem now ?
>
> Regards,
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developer
> http://www.opensips-solutions.com
> On 15.07.2014 05:21, jing wrote:
>> hi,Schneur.
>> Thanks for your advice.
>> But I did put the check before  create_dialog("B")  in the original 
>> oprnsips.cfg:
>> if (is_method("INVITE")) {
>>                 xlog("active dialog is $stat(active_dialogs)");
>>                 if ($stat(active_dialogs)>=1){
>>                 sl_send_reply("503", "Service Unavailable");
>>                 exit;
>>                 }
>>                 # create dialog with timeout
>>                 if ( !create_dialog("B") ) {
>>                         send_reply("500","Internal Server Error");
>>                         exit;
>>                 }
>>                 setflag(ACC_DO); # do accounting
>>         }
>>
>> So what is wrong in the script?
>> And I still want to know how to judge a call is "active_dialogs"?
>> Thanks a lot.
>> regards,
>> jing
>> ------------------ 原始邮 件 ------------------
>> *发件人:* "Schneur Rosenberg";<rosenberg11219 at gmail.com>;
>> *发送时间:* 2014年7月14日(星期一) 晚上6:25
>> *收件人:* "OpenSIPS users mailling list"<users at lists.opensips.org>;
>> *主题:* Re: [OpenSIPS-Users]回复: Dialog Concurrency Control Issue.
>>
>> You need to do this before the create_dialog() call
>>
>> On Jul 14, 2014 10:33 AM, "jing" <605507247 at qq.com 
>> <mailto:605507247 at qq.com>> wrote:
>>
>>     Thanks for your reply.But I have another question, I used
>>      active_dialogs in the cfg file as this:
>>     if (is_method("INVITE")) {
>>                     if ($stat(active_dialogs)>=1){
>>                     sl_send_reply("503", "Service Unavailable");
>>                     }
>>     But it seems not right.
>>     I use sipp to test the limit ,but when the value of
>>     active_dialogs aim to the number I set ,
>>     opensips sent 503,but  the value of active_dialogssitll increase.
>>     So I want to know how the value of this paramer comefrom.
>>     Or is there something wrong in my cfg document?
>>     regards,
>>     Jing
>>
>>
>>     ------------------ 原始 邮 件 ------------------
>>     *发件人:* "Schneur Rosenberg [via OpenSIPS (Open SIP
>>     Server)]"<[hidden email]
>>     <http://user/SendEmail.jtp?type=node&node=7592371&i=0>>;
>>     *发送时间:* 2014年7月14日(星期一) 下午2:08
>>     *收件人:* "jing "<[hidden email]
>>     <http://user/SendEmail.jtp?type=node&node=7592371&i=1>>;
>>     *主题:* Re: Dialog Concurrency Control Issue.
>>
>>     Very simple, before creating a new dialog check how many open
>>     dialogs exist.
>>
>>     On Jul 14, 2014 9:05 AM, "jing" <[hidden email]
>>     <http://user/SendEmail.jtp?type=node&node=7592369&i=0>> wrote:
>>
>>         hi,Bogdan
>>
>>
>>          I want to limit the total number of active dialogs ,what
>>         should I do ?
>>
>>         I found there are many questions about "Concurrent calls
>>         limitation " based
>>         on per user, it's not what I need.
>>
>>         I appreciate your advice very much,  more detailed the better.
>>
>>         Thanks,
>>         Regards,
>>         jing
>>
>>
>>
>>         --
>>         View this message in context:
>>         http://opensips-open-sip-server.1449251.n2.nabble.com/Dialog-Concurrency-Control-Issue-tp6172931p7592368.html
>>         Sent from the OpenSIPS - Users mailing list archive at
>>         Nabble.com.
>>
>>         _______________________________________________
>>         Users mailing list
>>         [hidden email]
>>         <http://user/SendEmail.jtp?type=node&node=7592369&i=1>
>>         http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>     _______________________________________________
>>     Users mailing list
>>     [hidden email]
>>     <http://user/SendEmail.jtp?type=node&node=7592369&i=2>
>>     http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>     ------------------------------------------------------------------------
>>     If you reply to this email, your message will be added to the
>>     discussion below:
>>     http://opensips-open-sip-server.1449251.n2.nabble.com/Dialog-Concurrency-Control-Issue-tp6172931p7592369.html
>>
>>     To unsubscribe from Dialog Concurrency Control Issue., click here.
>>     NAML
>>     <http://opensips-open-sip-server.1449251.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>>
>>
>>     ------------------------------------------------------------------------
>>     View this message in context: 回复: Dialog Concurrency Control
>>     Issue.
>>     <http://opensips-open-sip-server.1449251.n2.nabble.com/Dialog-Concurrency-Control-Issue-tp7592371.html>
>>     Sent from the OpenSIPS - Users mailing list archive
>>     <http://opensips-open-sip-server.1449251.n2.nabble.com/OpenSIPS-Users-f1449235.html>
>>     at Nabble.com.
>>
>>     _______________________________________________
>>     Users mailing list
>>     Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>>     http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20140715/297527e2/attachment.htm>


More information about the Users mailing list