[OpenSIPS-Users] CDRTool - Rating Origination and Termination differently
Tijmen de Mes
tijmen at ag-projects.com
Tue Feb 18 13:52:31 CET 2014
Hi All,
Already sent it to David in private, but will post it here to be complete.
We have trouble with the patch for call control. We get:
Feb 18 12:51:09 node04 call-control[19257]: error: 'Request' object has no attribute ‘application'
I looked into in and the call_control module of OpenSIPS seems to be not passing the application type. So is this module also patched ?
--
Tijmen de Mes
AG-Projects
On 12 februari 2014 at 21:05:32, David M. Lee (dlee at digium.com) wrote:
For everyone following along at home:
I’ve updated my CDRTool patch (again) to fix MaxSessionTime and ShowPrice commands, and fix some minor issues that cropped up with DebitBalance.
CDRTool patch - https://gist.github.com/leedm777/8585690
I’ve also discovered that the call_control daemon also needs to be patched to pass through the SIP Application Type from the call_control module onto the CDRTool prepaid engine.
callcontrol patch - https://gist.github.com/leedm777/8926025
I’ll be sending both patches to devel at ag-projects.com. Feedback welcome on both!
--
David M. Lee
Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
On Feb 6, 2014, at 9:29 AM, David M. Lee <dlee at digium.com> wrote:
I figured that out. I’ve updated the patch on my gist, and updated the rating doc to include a description of how the subtypes work.
I’m sending the patch to devel at ag-projects.com now.
Thanks!
--
David M. Lee
Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
On Jan 28, 2014, at 6:12 AM, Tijmen de Mes <tijmen at ag-projects.com> wrote:
Hi,
I run into trouble and reversed the patch. In the rating engine (telnet) DebitBalance function does not return anything anymore with the patch applied, so something goes wrong.
--
Tijmen de Mes
AG-Projects
On 27 januari 2014 at 17:55:01, Tijmen de Mes (tijmen at ag-projects.com) wrote:
Hi
I tested the patch and for now I don’t see any problem with it. Before adding it to trunk, can you update the rating docs and record all changes in 1 patch using darcs? After that I can apply it directly on trunk with your credentials.
These instructions to submit the patch also apply on CDRTool:
http://sipsimpleclient.org/projects/sipsimpleclient/wiki/SipSupport
You don’t need to open a ticket however, just tell me after you send the patch.
--
Tijmen de Mes
AG-Projects
On 26 januari 2014 at 02:08:50, Duane Larson (duane.larson at gmail.com) wrote:
Ugh.... Nevermind. My "Max Duration" was set to 6 on the Destinations rate setup. I set it to zero and I think things are looking better now. Think I'm done for the day. Good work David! Really appreciate the patch.
On Sat, Jan 25, 2014 at 6:56 PM, Duane Larson <duane.larson at gmail.com> wrote:
Not sure my "price" is being calculated correctly.
My audio.outbound should be $0.005
My audio.inbound should be $0.0035
Here is an example of a call that lasted 2:06 minutes and is audio.outbound
Increment=6 MinDuration=6 MaxDuration=6 ConnectFee=0.0000 CallId=dc1e32b1ba18ff91a3
67aa8df81e8e3c at 0:0:0:0:0:0:0:0 Span=1 Duration=6 DestId=1 default Profile=USA_Default Period=weekend Rate=USA_Default Interval=0-24 Cos
t=0.0050/60 Price=0.0005 PriceIn=0.0000
Here is an example of a call that lasted 1:33 minutes and is audio.inbound
Increment=6 MinDuration=6 MaxDuration=6 ConnectFee=0.0000 CallId=2e0334513a34964e7c0
a18cd3be449dd at 108.166.97.17:5060 Span=1 Duration=6 DestId=1 default Profile=USA_Default Period=weekend Rate=USA_Default Interval=0-24 C
ost=0.0035/60 Price=0.0003 PriceIn=0.0000
Looks like no matter what the duration is for the inbound calls it costs $0.0003 and the outbound calls all cost $0.0005.
On Sat, Jan 25, 2014 at 6:24 PM, Duane Larson <duane.larson at gmail.com> wrote:
David/Tijmen/Adrian,
It is working for me too. Both inbound and outbound are being recognized and the different rates are being applied. I will keep looking at it while more calls are being made to make sure there are no unforeseen issues.
On Fri, Jan 24, 2014 at 5:35 AM, Tijmen de Mes <tijmen at ag-projects.com> wrote:
Hi David,
Thanks for the patch. If have some time Monday I will analyze it and give you some feedback so we include this in CDRTool.
Besides the rating, I’ve to check if the code that now sets the the ‘route’ for the CDRs and if there are no problems.
--
Tijmen de Mes
AG-Projects
On 23 januari 2014 at 21:21:26, David M. Lee (dlee at digium.com) wrote:
I’ve got a first attempt at a patch:
https://gist.github.com/leedm777/8585690
To get this to work, your CDR’s will have to record the application
subtype. For me, I set $avp(s:call_class) = “audio.inbound” or
“audio.outbound” as appropriate in the routes, and added
Sip-Application-Type=$avp(s:call_class) to “radius_extra”.
Billing rates will be matched on the full application, allowing
different rates depending on the application subtype.
It works with the simple testing I’ve been able to do on my desktop.
Feedback, of course, is greatly appreciated.
Duane - Does the patch work for you?
Adrian - Any objections/concerns with this approach?
If it looks good, I’ll work on updating the docs.
Thanks!
--
David M. Lee
Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
On Jan 23, 2014, at 4:43 AM, Adrian Georgescu <ag at ag-projects.com> wrote:
> I think it would be a good idea.
>
> Adrian
>
> On 22 Jan 2014, at 16:58, David Lee (digium) <dlee at digium.com> wrote:
>
>> Duane Larson wrote:
>>> I have been playing with CDRTool for a while but I am not sure if it is
>>> possible to rate Origination (Inbound) calls differently than Termination
>>> (Outbound) calls from my SIP Provider. For Origination I pay 0.0035 and
>>> for Termination I pay 0.005. Keep in mind these costs are for destination
>>> "1”.
>>
>> I've recently run into nearly the same situation.
>>
>> I tried overloading the Sip-Application-Type field, but it's limited
>> by the supportedApplicationTypes array in cdr_generic.php. There also
>> seems to be hard coded logic for the different application types.
>>
>> I think I will patch CDRTool so that you can have subtypes of
>> application types (audio.inbound, audio.outbound, etc.). This would
>> allow the billing rates to be a bit more specific for these
>> situations.
>>
>> Thoughts?
>> --
>> David M. Lee
>> Digium, Inc. | Software Developer
>> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
>> Check us out at: www.digium.com & www.asterisk.org
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--
--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--
--
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--
_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20140218/994c6bf4/attachment-0001.htm>
More information about the Users
mailing list