[OpenSIPS-Users] opensips and syslog facility/level

Liviu Chircu liviu at opensips.org
Wed Aug 13 10:41:05 CEST 2014


Hello Oleksandr,

By default, OpenSIPS should start with "debug = 2". So unless you've 
explicitly set a lower value within your script, all three messages 
should be logged.

To troubleshoot this, when doing this test, could you also run a 
"opensipsctl fifo debug" command and paste the output here?
(make sure to load the mi_fifo module if it's not already there)

Best regards,

Liviu Chircu
OpenSIPS Developer
http://www.opensips-solutions.com

On 08/13/2014 12:48 AM, Oleksandr Kunytsia wrote:
> Hello Liviu,
>
> I've got local developer to test changes, so I can test now your 
> suggestions:
>
> I started with such change:
>
> ---------------------------
>
> startup_route {
>         #xlog("using localhost for routing");
>         xlog("L_INFO"," L-INFO using localhost for routing");
>         xlog("L_NOTICE"," L_NOTICE using localhost for routing");
>         xlog(" no LEVEL using localhost for routing");
> }
>
> ---------------------------
>
> After I restarted opensips I got only one line in logs:
>
> ==> /var/log/sips.log <==
> local2.err<147>: Aug 12 14:44:05 sip1 /usr/sbin/opensips[28615]:  no 
> LEVEL using localhost for routing
>
> --------
>
> What is the reason of that?
>
> # /usr/sbin/opensips -V
> version: opensips 1.7.1-tls (x86_64/linux)
> flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, DISABLE_NAGLE, 
> USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, 
> FAST_LOCK-ADAPTIVE_WAIT
> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, 
> MAX_URI_SIZE 1024, BUF_SIZE 65535
> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
> svnrevision: unknown
> @(#) $Id: main.c 8537 2011-11-08 17:02:11Z bogdan_iancu $
> main.c compiled on 22:15:48 Nov 23 2011 with gcc 4.1.2
>
> /Oleksandr
>
>
> On Thu, Aug 7, 2014 at 2:25 PM, Liviu Chircu <liviu at opensips.org 
> <mailto:liviu at opensips.org>> wrote:
>
>     I understand what's happening now. The thing is, if you use xlog()
>     with only 1 parameter in your script, that message will simply go
>     to syslog's LOG_ERR (it should be visible!).
>
>     You can control the logging level within your script with
>     xlog("L_NOTICE", ".....") or xlog("L_DBG", "...") for example.
>
>     Best regards,
>
>     Liviu Chircu
>     OpenSIPS Developer
>     http://www.opensips-solutions.com
>
>     On 08/06/2014 08:29 PM, Oleksandr Kunytsia wrote:
>>     on my config debug set to 0:
>>     ----
>>
>>     #
>>     # GLOBALS
>>     #
>>     debug=0
>>     log_facility=LOG_LOCAL2
>>     log_stderror=no
>>     ------
>>
>>
>>     I also configured rsyslog for saving LOCAL2 to file with specific
>>     template:
>>     ----
>>     $template precise,"%pri-text%: %timegenerated% %HOSTNAME%
>>     %syslogtag%%msg%\n"
>>     local2.* -/var/log/sips.log;precise
>>     ----
>>
>>     extract from  /var/log/sips.log:
>>
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5588]: new-int
>>     INVITE[PhoneNUM,PhoneNUM57]: SIP 404 after 19161ms from IP.ADD.RE.SS
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5612]: r-lt1
>>     INVITE[+1PhoneNUM,PhoneNUM1]: SIP 180 after 25905ms from IP.ADD.RE.SS
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5592]: r-lt1
>>     INVITE[+1PhoneNUM,PhoneNUM5]: relayed IP.ADD.RE.SS outbound to
>>     IP.ADD.RE.SS
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5600]: r-in1
>>     INVITE[+1PhoneNUM,PhoneNUM7]: relayed IP.ADD.RE.SS outbound to
>>     IP.ADD.RE.SS
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5588]: new-int
>>     INVITE[PhoneNUM7,PhoneNUM]: relayed IP.ADD.RE.SS outbound to
>>     IP.ADD.RE.SS
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5560]: r-in1
>>     INVITE[+PhoneNUM,PhoneNUM437]: SIP 100 after 3ms from IP.ADD.RE.SS
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5650]: r-lt1
>>     INVITE[800PhoneNUM,PhoneNUM248]: relayed IP.ADD.RE.SS outbound to
>>     IP.ADD.RE.SS
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5622]: r-lt1
>>     INVITE[+PhoneNUM,PhoneNUM015]: SIP 100 after 9ms from IP.ADD.RE.SS
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5624]: Broadvox
>>     BYE[PhoneNUM,PhoneNUM00] existing dialog
>>     local2.err<147>: Aug  6 17:18:52 r-sip opensips[5604]: r-in1
>>     INVITE[80PhoneNUM,PhoneNUM213]: SIP 183 after 7270ms from
>>     IP.ADD.RE.SS
>>
>>
>>     On Wed, Aug 6, 2014 at 11:17 AM, Muhammad Shahzad
>>     <shaheryarkh at gmail.com <mailto:shaheryarkh at gmail.com>> wrote:
>>
>>         You can set opensips log level using "debug" parameter.
>>
>>         http://www.opensips.org/Documentation/Script-CoreParameters-1-11#toc35
>>
>>         Also make sure your syslog service is configured to send
>>         local2.* logs to the log file(s) where you want to see them.
>>         i.e. to see all opensips logs file named opensips.log set
>>         /etc/rsyslog.conf to have entry like this,
>>
>>         local2.*  /var/log/opensips.log
>>
>>         Then restart the service.
>>
>>         Hope this helps.
>>
>>         Thank you.
>>
>>
>>
>>
>>         On Wed, Aug 6, 2014 at 10:49 AM, Oleksandr Kunytsia
>>         <okunia at gmail.com <mailto:okunia at gmail.com>> wrote:
>>
>>             Hello,
>>
>>             Logging of my opensips looks like the following:
>>
>>             ----cut----
>>             log_facility=LOG_LOCAL2
>>             log_stderror=no
>>             ----cut----
>>
>>             Opensips sends logging information as LOCAL2.error messages,
>>
>>             How to configure to send messages with another log_level?
>>             e.g. local2.info <http://local2.info/>?
>>
>>             _______________________________________________
>>             Users mailing list
>>             Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>>             http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>>         _______________________________________________
>>         Users mailing list
>>         Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>>         http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>>
>>     _______________________________________________
>>     Users mailing list
>>     Users at lists.opensips.org  <mailto:Users at lists.opensips.org>
>>     http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>     _______________________________________________
>     Users mailing list
>     Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>     http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20140813/338e41f4/attachment-0001.htm>


More information about the Users mailing list