[OpenSIPS-Users] 回复: 回复: freeradiusd-2.2.0 Unsupported Acct-Status-Type= 15

ㄨ冷se灬 291490117 at qq.com
Thu Jul 4 02:44:56 CEST 2013


there is no errors 

from log I can see only like: 

[sql] Unsupported Acct-Status-Type = 15
++[sql] returns noop


------------------ 原始邮件 ------------------
发件人: "Laszlo"<laszlo at voipfreak.net>;
发送时间: 2013年7月3日(星期三) 晚上6:16
收件人: "OpenSIPS users mailling list"<users at lists.opensips.org>; 

主题: Re: [OpenSIPS-Users]回复: freeradiusd-2.2.0 Unsupported Acct-Status-Type= 15




What errors did you get?
 2013.07.03. 11:07, "ㄨ冷se灬" <291490117 at qq.com> ezt írta:
 readme.txt show me:
Patch for  - Added support for acct type Failed (15) - Added MySQL stored procedures support - Removed Cisco hack that causes errors in radius.log if acctsessiontime= 0 but the patch isn't working.  



------------------ 原始邮件 ------------------
 发件人: "Laszlo"<laszlo at voipfreak.net>;
发送时间: 2013年7月3日(星期三) 下午3:30
收件人: "OpenSIPS users mailling list"<users at lists.opensips.org>; 
 
主题: Re: [OpenSIPS-Users] freeradiusd-2.2.0 Unsupported Acct-Status-Type= 15



Did you compile freeradius from source? If so, you will need to patch it and then recompile freeradius.
 
The patch can be found here: http://download.dns-hosting.info/CDRTool/contrib/freeradius-brandinger/
 


These are quite old patches, if the most recent patch isn't working for you, then you will need to go through the patching logic manually. It will involve editing the following files:


  - freeradius/src/include/radius.h

- freeradius/src/modules/rlm_sql/conf.h

- freeradius/src/modules/rlm_sql/rlm_sql.c

- the config file under freeradius's /etc directory

 
Look at the lines with the "+" lines in the patch file.



-Laszlo








2013/7/3 ㄨ冷se灬 <291490117 at qq.com>
 dear all:
         I update my freeradius from v1.1.8 to v2.2.0.
         when I use v2.2.0 ,I can’t see unsuccessfully calls(like cancel,etc)
 
         and radius got this log:
rad_recv: Accounting-Request packet from host 10.1.17.71 port 47962, id=165, length=510
    Acct-Status-Type = Failed
    Service-Type = IAPP-Register
    Sip-Response-Code = 487
     Sip-Method = Invite
    Event-Timestamp = "Jul  3 2013 08:55:14 CST"
    Sip-From-Tag = "202199366"
    Sip-To-Tag = "3c11a175"
    Acct-Session-Id = "261192415021484-264973041726312 at 10.49.2.236"
     User-Name = "66687113 at 10.1.17.71"
    Billing-Party = "66687113 at 10.1.17.71"
     Calling-Station-Id = "66687113 at 10.1.17.71"
     Called-Station-Id = "sip:66687114 at c.corp.esocc.com:5060"
    Sip-Translated-Request-URI = "sip:66687114 at 221.228.228.14:58709;rinstance=e3a8a78bae83cfb9"
     Source-IP = "221.228.228.14"
    Source-Port = "32670"
    SIP-Proxy-IP = "10.1.17.71"
    Canonical-URI = "sip:008666687114 at 221.228.228.14:58709;rinstance=e3a8a78bae83cfb9"
     User-Agent = "Voip Phone 1.0"
    Contact = "<sip:66687113 at 221.228.228.14:32670>"
    From-Header = "66687113 <sip:66687113 at c.corp.esocc.com:5060>;tag=202199366"
     NAS-Port = 5060
    Acct-Delay-Time = 0
    NAS-IP-Address = 10.1.17.71
# Executing section preacct from file /usr/local/freeradius/etc/raddb/radiusd.conf
+- entering group preacct {...}
++[preprocess] returns ok
 # Executing section accounting from file /usr/local/freeradius/etc/raddb/radiusd.conf
+- entering group accounting {...}
[detail]     expand: /usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /usr/local/freeradius/var/log/radius/radacct/10.1.17.71/detail-20130703
 [detail] /usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/freeradius/var/log/radius/radacct/10.1.17.71/detail-20130703
 [detail]     expand: %t -> Wed Jul  3 08:55:14 2013
++[detail] returns ok
[sql] Unsupported Acct-Status-Type = 15
++[sql] returns noop
Sending Accounting-Response of id 165 to 10.1.17.71 port 47962
Finished request 1.
 Cleaning up request 1 ID 165 with timestamp +9
Going to the next request
Waking up in 3.4 seconds.
Cleaning up request 0 ID 164 with timestamp +7
Ready to process requests.


      It seem Unsupported Acct-Status-Type = 15,and I check my dictionary 
       VALUE Acct-Status-Type     Failed           15         # RFC2866, acc


      I'm sure there's a configuration step I've missed. Could anyone suggest some 
       other things to check? 
 



 Thanks 
 vic.xiang


_______________________________________________
 Users mailing list
 Users at lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users
 




-- 

--

Kind regards,

Laszlo Bekesi

http://voipfreak.net
 
 


_______________________________________________
 Users mailing list
 Users at lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20130704/42c27d3b/attachment.htm>


More information about the Users mailing list