[OpenSIPS-Users] FW: Error starting opensips 1.8.1

Shimon Mishal shimon.mishal at telrad.com
Sun Sep 2 14:16:36 CEST 2012


Hi
Could someone take remote control through Team Viewer and assist me since I’m in a loop ???


Sep  2 12:04:11 ip-10-128-35-32 opensips: WARNING:core:warn: warning in config file, line 50, column 13-16: tls support not compiled in
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 60, column 13-14: failed to load module - not found
Sep  2 12:04:11 ip-10-128-35-32 opensips: ERROR:core:sr_load_module: could not open module <//lib64/opensips/modules/sipmsgops>: //lib64/opensips/modules/sipmsgops: cannot open shared object file: No such file or directory
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 60, column 13-14: failed to load module
Sep  2 12:04:11 ip-10-128-35-32 opensips: ERROR:core:yyparse: module 'sipmsgops.so' not found in '//lib64/opensips/modules/'
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 87, column 13-14: failed to load module
Sep  2 12:04:11 ip-10-128-35-32 opensips: ERROR:core:sr_load_module: could not open module <//lib64/opensips/modules/>: //lib64/opensips/modules/: cannot read file data: Is a directory
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 87, column 13-14: failed to load module
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 165, column 20-21: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 168, column 27-28: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 182, column 21-22: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 200, column 18-19: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 209, column 21-22: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 230, column 20-21: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 236, column 19-20: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 240, column 18-19: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 247, column 19-20: unknown command <append_hf>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 254, column 18-19: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 260, column 18-19: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 303, column 18-19: unknown command <is_method>, missing loadmodule?
Sep  2 12:04:11 ip-10-128-35-32 opensips: ERROR:core:main: bad config file (16 errors)

From: users-bounces at lists.opensips.org [mailto:users-bounces at lists.opensips.org] On Behalf Of Schneur Rosenberg
Sent: Sunday, September 02, 2012 1:12 PM
To: OpenSIPS users mailling list
Subject: Re: [OpenSIPS-Users] FW: Error starting opensips 1.8.1


Shalom Shimon u need to make sure that you compiled all needed modules.
On Sep 2, 2012 1:03 PM, "Shimon Mishal" <shimon.mishal at telrad.com<mailto:shimon.mishal at telrad.com>> wrote:
Hi

I followed your instruction and loaded the missing "sipmsgops" module but now I get different errors:

Could someone send me the correct config file for 1.8.1

ERROR: PID file /var/run/opensips/opensips.pid does not exist -- OpenSIPS start failed
[ec2-user at ip-10-128-35-32 opensips]$ sudo tail /var/log/messages
Sep  2 09:50:13 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 16, column 13-14: failed to load module
Sep  2 09:50:13 ip-10-128-35-32 opensips: ERROR:core:sr_load_module: could not open module <auth.so>: auth.so: cannot open shared object file: No such file or directory
Sep  2 09:50:13 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 17, column 13-14: failed to load module
Sep  2 09:50:13 ip-10-128-35-32 opensips: ERROR:core:sr_load_module: could not open module <auth_db.so>: auth_db.so: cannot open shared object file: No such file or directory
Sep  2 09:50:13 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 18, column 13-14: failed to load module
Sep  2 09:50:13 ip-10-128-35-32 opensips: ERROR:core:set_mod_param_regex: no module matching usrloc found#012|
Sep  2 09:50:13 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 19, column 20-21: Can't set module parameter
Sep  2 09:50:13 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 19, column 21-22: syntax error
Sep  2 09:50:13 ip-10-128-35-32 opensips: CRITICAL:core:yyerror: parse error in config file, line 19, column 21-22:
Sep  2 09:50:13 ip-10-128-35-32 opensips: ERROR:core:main: bad config file (6 errors)



------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

[ec2-user at ip-10-128-35-32 opensips]$ cat opensips.cfg
#
# $Id: opensips.cfg 8758 2012-02-29 11:59:26Z vladut-paiu $
#
# OpenSIPS residential configuration script
#     by OpenSIPS Solutions <team at opensips-solutions.com<mailto:team at opensips-solutions.com>>
#
# This script was generated via "make menuconfig", from
#   the "Residential" scenario.
# You can enable / disable more features / functionalities by
#   re-generating the scenario with different options.#
#
# Please refer to the Core CookBook at:
#      http://www.opensips.org/Resources/DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#
loadmodule "db_mysql.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
 modparam("usrloc", "db_mode", 0); #THIS LINE MUST TO BE COMMENTED

modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

    ----- auth_db params -----

/* uncomment the following lines if you want to enable the DB based authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
####### Global Parameters #########

debug=3
log_stderror=no
log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes

/* uncomment the next line to enable the auto temporary blacklisting of
   not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns
   lookup failures (default disabled) */
#dns_try_ipv6=yes

/* comment the next line to enable the auto discovery of local aliases
   based on revers DNS on IPs */
auto_aliases=no


listen=udp:127.0.0.1:5060<http://127.0.0.1:5060>   # CUSTOMIZE ME


disable_tcp=yes

disable_tls=yes


####### Modules Section ########

#set module path
mpath="/usr/local/lib64/opensips/modules/"

#######sipmsgops_Module#############
loadmodule "sipmsgops"


#### SIGNALING module
loadmodule "signaling.so"

#### StateLess module
loadmodule "sl.so"

#### Transaction Module
loadmodule "tm.so"
modparam("tm", "fr_timer", 5)
modparam("tm", "fr_inv_timer", 30)
modparam("tm", "restart_fr_on_each_reply", 0)
modparam("tm", "onreply_avp_mode", 1)

#### Record Route Module
loadmodule "rr.so"
/* do not append from tag to the RR (no need for this script) */
modparam("rr", "append_fromtag", 0)

#### MAX ForWarD module
loadmodule "maxfwd.so"

#### SIP MSG OPerationS module
loadmodule "sipmsgops.so"

#### FIFO Management Interface
loadmodule "mi_fifo.so"
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")


#### URI module
loadmodule "uri.so"
modparam("uri", "use_uri_table", 0)






#### USeR LOCation module
loadmodule "usrloc.so"
modparam("usrloc", "nat_bflag", 10)
modparam("usrloc", "db_mode",   0)

#### REGISTRAR module
loadmodule "registrar.so"
modparam("registrar", "tcp_persistent_flag", 7)

/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)

#### ACCounting module
loadmodule "acc.so"
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_cancels", 0)
/* by default we do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
modparam("acc", "failed_transaction_flag", 3)
/* account triggers (flags) */
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)




















####### Routing Logic ########

# main request routing logic

route{


        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                exit;
        }

        if (has_totag()) {
                # sequential request withing a dialog should
                # take the path determined by record-routing
                if (loose_route()) {

                        if (is_method("BYE")) {
                                setflag(1); # do accounting ...
                                setflag(3); # ... even if the transaction fails
                        } else if (is_method("INVITE")) {
                                # even if in most of the cases is useless, do RR for
                                # re-INVITEs alos, as some buggy clients do change route set
                                # during the dialog.
                                record_route();
                        }



                        # route it out to whatever destination was set by loose_route()
                        # in $du (destination URI).
                        route(1);
                } else {

                        if ( is_method("ACK") ) {
                                if ( t_check_trans() ) {
                                        # non loose-route, but stateful ACK; must be an ACK after
                                        # a 487 or e.g. 404 from upstream server
                                        t_relay();
                                        exit;
                                } else {
                                        # ACK without matching transaction ->
                                        # ignore and discard
                                        exit;
                                }
                        }
                        sl_send_reply("404","Not here");
                }
                exit;
        }

        # CANCEL processing
        if (is_method("CANCEL"))
        {
                if (t_check_trans())
                        t_relay();
                exit;
        }

        t_check_trans();

        if ( !(is_method("REGISTER")  ) ) {

                if (from_uri==myself)

                {

                } else {
                        # if caller is not local, then called number must be local

                        if (!uri==myself) {
                                send_reply("403","Rely forbidden");
                                exit;
                        }
                }

        }

        # preloaded route checking
        if (loose_route()) {
                xlog("L_ERR",
                "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
                if (!is_method("ACK"))
                        sl_send_reply("403","Preload Route denied");
                exit;
        }

        # record routing
        if (!is_method("REGISTER|MESSAGE"))
                record_route();

        # account only INVITEs
        if (is_method("INVITE")) {

                setflag(1); # do accounting
        }


        if (!uri==myself) {
                append_hf("P-hint: outbound\r\n");

                route(1);
        }

        # requests for my domain

        if (is_method("PUBLISH|SUBSCRIBE"))
        {
                sl_send_reply("503", "Service Unavailable");
                exit;
        }

        if (is_method("REGISTER"))
        {


                if (   0 ) setflag(7);

                if (!save("location"))
                        sl_reply_error();

                exit;
        }

        if ($rU==NULL) {
                # request with no Username in RURI
                sl_send_reply("484","Address Incomplete");
                exit;
        }







        # do lookup with method filtering
        if (!lookup("location","m")) {


                t_newtran();
                t_reply("404", "Not Found");
                exit;
        }



        # when routing via usrloc, log the missed calls also
        setflag(2);
        route(1);
}


route[1] {
        # for INVITEs enable some additional helper routes
        if (is_method("INVITE")) {



                t_on_branch("2");
                t_on_reply("2");
                t_on_failure("1");
        }



        if (!t_relay()) {
                send_reply("500","Internal Error");
        };
        exit;
}




branch_route[2] {
        xlog("new branch at $ru\n");
}


onreply_route[2] {

        xlog("incoming reply\n");
}


failure_route[1] {
        if (t_was_cancelled()) {
                exit;
        }

        # uncomment the following lines if you want to block client
        # redirect based on 3xx replies.
        ##if (t_check_status("3[0-9][0-9]")) {
        ##t_reply("404","Not found");
        ##      exit;
        ##}


}



[ec2-user at ip-10-128-35-32 opensips]$


Regards

Shimon Mishal

















************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************




_______________________________________________
Users mailing list
Users at lists.opensips.org<mailto:Users at lists.opensips.org>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users



************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************

 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20120902/ab33909b/attachment-0001.htm>


More information about the Users mailing list