[OpenSIPS-Users] calls have max call duration

[M. KHaled W. Chehab]

Thank Mohammad,

really appriciated.
waiting your script.

khaled chehab

Sent from my android device.



-----Original Message-----
From: Muhammad Shahzad <shaheryarkh at googlemail.com>
To: OpenSIPS users mailling list <users at lists.opensips.org>
Sent: Sun, 18 Nov 2012 4:45 PM
Subject: Re: [OpenSIPS-Users] calls have max call duration

humm, how can this be? It always works. Something is really weird going on
in your opensips configuration.

OK, let me prepare an alternative configuration for you and send you in 2-3
hours.

BTW, you can call me Muhammad.

Thank you.


On Sun, Nov 18, 2012 at 12:34 AM, M. KHaled W. Chehab
<kchehab at icucall.com>wrote:

> dears,
>
> the mediaproxy timeout didnt.suceed any more ideas?
>
> Regards
>
> Sent from my android device.
>
>
>
> -----Original Message-----
> From: "M.Khaled W Chehab" <kchehab at icucall.com>
> To: 'OpenSIPS users mailling list' <users at lists.opensips.org>
> Sent: Fri, 16 Nov 2012 5:18 PM
> Subject: Re: [OpenSIPS-Users] calls have max call duration
>
> Dears,****
>
> ** **
>
> Thanks for your kindly reply, and I will try to arrange my opensips
> configuration file  and send it back if the media configuration didn’t
> solve this problem  ,****
>
> BTW I am using  a mix between a residential and trunking script  ,do you
> have a config tested  having a permission ,routing  dialplan  module tested
>  for small carrier level ,you can send me a copy of it  .****
>
> ****
>
> My old config mediaproxy was ****
>
> stream_timeout = 90****
>
> on_hold_timeout = 3540****
>
> so set it now to ****
>
> stream_timeout = 30****
>
> on_hold_timeout = 600****
>
> ** **
>
> I will  monitor it now  and inform you about the result , but my question
> is ,is there a solution using signaling  function I can implement ?****
>
> ** **
>
> ** **
>
> Regards****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> *From:* users-bounces at lists.opensips.org [mailto:
> users-bounces at lists.opensips.org] *On Behalf Of *Muhammad Shahzad
> *Sent:* Friday, November 16, 2012 5:01 PM
> *To:* OpenSIPS users mailling list
> *Subject:* Re: [OpenSIPS-Users] calls have max call duration****
>
> ** **
>
> Your opensips config is pretty messed up and hard to read. So, while i try
> to read it to find the problem, as a workaround you should set RTP timeouts
> in your mediaproxy configuration file (i.e. config.ini), e.g.****
>
> ** **
>
> stream_timeout = 30****
>
> on_hold_timeout = 1800
>
> This will result in automatic call hangup if there is no media for at
> least 30 seconds. This will reduce wrong billing problem to 30 seconds, and
> your customer's balance will not be exhausted completely. Similarly if call
> is on hold for more then 30 minutes and no media is transferred during this
> time (not even music on hold) then call will hangup (change this timeout to
> whatever appropriate for you).****
>
> ** **
>
> Thank you.****
>
> ** **
>
> On Fri, Nov 16, 2012 at 2:13 PM, M.Khaled W Chehab <kchehab at icucall.com>
> wrote:****
>
> Dears,****
>
>  ****
>
> How to drop  the call  when a cancel received from UA and a 200 OK from
> the trunk in the same second, note back the client cdr will be a canceled
> call and the trunk cdr will be 1 sec duration but on my cdr its the max
> daialog  timeout duration****
>
>  ****
>
> I am searching for a  solution for this since two weeks as I tried all
> trick I know and all didn’t succeed ,****
>
> Find attached the scenario I have problem with, which you can find it at
>  wireshark time line (30.877027)  the Client with IP ( 74.114.101.170)
> sends  a cancel ,and the opensips version 1.8.2  server with IP
> 89.207.133.144   send the client 200 canceling and  in its terms forward
> the cancel to the trunk provider with IP 74.114.101.190 ,but at 31.015333
> wireshark time line the trunk sends a 200 OK  then 487 request terminated
>  and the billing stops from the trunk provider  .****
>
> The problem is my opensips with IP 89.207.133.144 didn’t hangup the call
> and go for the max call duration in the dialog module .****
>
> -how to let opensips cancel the call immediately  and stop it with no
> billing .****
>
> Please find attached my opensips.cfg configuration file ****
>
>  ****
>
> Regards****
>
>  ****
>
>  ****
>
> Khaled Chehab****
>
> Senior NGN Engineer****
>
> [image: Description: icucall]****
>
> Operations Office - Lebanon****
>
> Office    : +961 1 515155 ext 300****
>
> Mobile  : +961 3 045212****
>
> E-mail    : kchehab at icucall.com****
>
> MSN ID :khalidchehab at hotmail.com ****
>
> Skype    : k_chehab ****
>
> Web Site: http://www.icucall.com****
>
>                      http://www.allohi.com****
>
>  ****
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users****
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20121118/93d3619b/attachment-0001.htm>