[OpenSIPS-Users] 3G video
Nick
nick_chang at ezmobo.com
Thu Oct 6 11:00:23 CEST 2011
Hello
Now, I have two iphone4. One is wifi , other is 3G
I used wifi call to 3G.
3G iphone can see video and listen voice.
But wifi iphone can't see video and listen voice.
Can everybody give a suggest?? Thanks
it's my config(opensips.cfg)
#
# $Id: opensips.cfg 8141 2011-07-08 12:17:13Z vladut-paiu $
#
# OpenSIPS basic configuration script
# by Anca Vamanu <anca at voice-system.ro>
#
# Please refer to the Core CookBook at:
# http://www.opensips.org/Resources/DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#
####### Global Parameters #########
debug=4
log_stderror=yes
log_facility=LOG_LOCAL0
fork=yes
children=4
alias=61.63.47.140
/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes
/* uncomment the next line to disable TCP (default on) */
disable_tcp=yes
/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes
/* uncomment the next line to disable the auto discovery of local aliases
based on revers DNS on IPs (default on) */
#auto_aliases=no
/* uncomment the following lines to enable TLS support (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"
# default db_url to be used by modules requiring DB connection
db_default_url="postgres://opensips:opensipsrw@10.10.12.100/opensips"
port=5060
/* uncomment and configure the following line if you want opensips to
bind on a specific interface/port/proto (default bind on all
available) */
#listen=udp:192.168.1.2:5060
####### Modules Section ########
#set module path
mpath="/usr/local/lib64/opensips/modules/"
/* uncomment next line for MySQL DB support */
#loadmodule "db_mysql.so"
loadmodule "db_postgres.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri.so"
loadmodule "acc.so"
/* uncomment next lines for MySQL based authentication support
NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "auth.so"
#loadmodule "auth_db.so"
/* uncomment next line for aliases support
NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
NOTE: a DB (like db_mysql) module must be also loaded
NOTE: be sure and enable multi-domain support in all used modules
(see "multi-module params" section ) */
#loadmodule "domain.so"
/* uncomment the next two lines for presence server support
NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "presence.so"
#loadmodule "presence_xml.so"
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
# ----- rr params -----
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- registrar params -----
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# ----- usrloc params -----
modparam("usrloc", "db_mode", 0)
/* uncomment the following lines if you want to enable DB persistency
for location entries */
#modparam("usrloc", "db_mode", 2)
#modparam("usrloc", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
# ----- uri params -----
modparam("uri", "use_uri_table", 0)
# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
authentication */
#modparam("auth_db", "calculate_ha1", yes)
#modparam("auth_db", "password_column", "password")
#modparam("auth_db", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("auth_db", "load_credentials", "")
# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
aliases */
#modparam("alias_db", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
support */
#modparam("domain", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("domain", "db_mode", 1) # Use caching
# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
in the modules (dafault off) */
#modparam("auth_db|usrloc|uri", "use_domain", 1)
# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
#modparam("presence|presence_xml", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("presence_xml", "force_active", 1)
#modparam("presence", "server_address", "sip:192.168.1.2:5060")
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless, do RR for
# re-INVITEs alos, as some buggy clients do change
route set
# during the dialog.
record_route();
}
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(1);
} else {
/* uncomment the following lines if you want to enable
presence */
##if (is_method("SUBSCRIBE") && $rd ==
"your.server.ip.address") {
## # in-dialog subscribe requests
## route(2);
## exit;
##}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK
after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#initial requests
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# authenticate if from local subscriber (uncomment to enable auth)
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain
version*/
##if (!(method=="REGISTER") && is_from_local()) /*multidomain
version*/
##{
## if (!proxy_authorize("", "subscriber")) {
## proxy_challenge("", "0");
## exit;
## }
## if (!db_check_from()) {
## sl_send_reply("403","Forbidden auth ID");
## exit;
## }
##
## consume_credentials();
## # caller authenticated
##}
# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
setflag(1); # do accounting
}
if (!uri==myself)
## replace with following line if multi-domain support is used
##if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
route(1);
}
# requests for my domain
## uncomment this if you want to enable presence server
## and comment the next 'if' block
## NOTE: uncomment also the definition of route[2] from below
##if( is_method("PUBLISH|SUBSCRIBE"))
## route(2);
if (is_method("PUBLISH"))
{
sl_send_reply("503", "Service Unavailable");
exit;
}
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
##if (!www_authorize("", "subscriber"))
##{
## www_challenge("", "0");
## exit;
##}
##
##if (!db_check_to())
##{
## sl_send_reply("403","Forbidden auth ID");
## exit;
##}
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# apply DB based aliases (uncomment to enable)
##alias_db_lookup("dbaliases");
# do lookup with method filtering
if (!lookup("location","m")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
route(1);
}
route[1] {
# for INVITEs enable some additional helper routes
if (is_method("INVITE")) {
t_on_branch("2");
t_on_reply("2");
t_on_failure("1");
}
if (!t_relay()) {
sl_reply_error();
};
exit;
}
# Presence route
/* uncomment the whole following route for enabling presence
NOTE: do not forget to enable the call of this route from the main
route */
##route[2]
##{
## if (!t_newtran())
## {
## sl_reply_error();
## exit;
## };
##
## if(is_method("PUBLISH"))
## {
## handle_publish();
## }
## else
## if( is_method("SUBSCRIBE"))
## {
## handle_subscribe();
## }
##
## exit;
##}
branch_route[2] {
xlog("new branch at $ru\n");
}
onreply_route[2] {
xlog("incoming reply\n");
}
failure_route[1] {
if (t_was_cancelled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## # do not set the missed call flag again
## t_relay();
##}
}
More information about the Users
mailing list