[OpenSIPS-Users] Opensips Control Pannel does not take effect into Opensips Server

Dave Singer dave.singer at wideideas.com
Thu Mar 24 16:00:35 CET 2011 

Duong,

The MI commands are for opensips and ps does NOT take any arguments.
The easiest way for it to connect when on the same box is with fifo.
Here is a snippet from the boxes.global.inc.php:
/*==================== DEFINITION OF BOXES (servers) ========================*/
// each server is a box
$box_id=0;
$boxes[$box_id]['mi']['type']="fifo";
$boxes[$box_id]['mi']['fifo']="/tmp/opensips_fifo";

This does require that opensips module mi_fifo is loaded and
configured with the same path/file as you set in the config above
(above path is the default path).
opensipsctl uses it also (unless it was configured to use xmlrpc (not
sure it can)).
Opensips xmlrpc module by default lisetns on port 8000, not the sip
port 5060. That is why you got that message.
I've not been able to get xmlrpc to compile and work on Centos 5 servers.

Dave

On Thu, Mar 24, 2011 at 12:17 AM, Duong Manh Truong
<ngoahotanglongbk at gmail.com> wrote:
>
> Thank Dave!
> When going to the "MI commands" tab, surprisingly i found that
> "Cannot connect to OpenSIPS Server via Management Interface (127.0.0.1/8000)
> Execute MI Command"
>
> After i executed the "ps -A" command, i only got this
> "14:02:20  |  ps -A   |  127.0.0.1:8000"
> The same result for "opensipsctl online" command
>  "14:04:37  |   opensipsctl online   |  127.0.0.1:8000"
> And i think the problem is my CP does not connect to my Opensips server on 5060 port. I remember that i have not configured CP listening port before, it is default :-(
> (CP & Opensips server were installed in the same machine)
> Checking these files "db.inc.php" ; local.inc.php; globals.php  in the CP config directory "/var/www/opensips-cp/config"
> I don't see anywhere to config CP listening port !
> Please help me to figure out, thanks!
> 2011/3/24 Dave Singer <dave.singer at wideideas.com>
>>
>> Duong,
>>
>> Yea missed that. :-)
>> To check basic CP connection to opensips, go to System, MI Commands.
>> In box under Execute MI Command, put "ps" and click "execute". It
>> should show a bunch of lines about the opensips processes that are
>> running.
>>
>> As far as showing Online Users, it may be using presence module/table
>> rather than active registrations to qualify a user as "online".
>> Someone else will have to answer that or you can look at the CP source
>> code for that answer.
>>
>> Dave
>>
>> On Wed, Mar 23, 2011 at 12:35 PM, Duong Manh Truong
>> <ngoahotanglongbk at gmail.com> wrote:
>> > Thank David,
>> > But i found that in my opensips.cfg file:
>> > "
>> > # ----- usrloc params -----
>> > # modparam("usrloc", "db_mode",   0)
>> > /* uncomment the following lines if you want to enable DB persistency
>> >    for location entries */
>> > modparam("usrloc", "db_mode",   2)
>> > modparam("usrloc", "db_url",
>> > "mysql://opensips:opensipsrw@localhost/opensips")
>> > "
>> > So i think that my "db_mode" is not the cause of my failed CP
>> > " 2 - Write-Back scheme. This is a combination of previous two schemes. All
>> > changes are made to memory and database synchronization is done in the
>> > timer. The timer deletes all expired contacts and flushes all modified or
>> > new contacts to database. Use this scheme if you encounter high-load peaks
>> > and want them to process as fast as possible. The mode will not help at all
>> > if the load is high all the time. Also, latency of this mode is much lower
>> > than latency of mode 1, but slightly higher than latency of mode 0."
>> > My CP still does  not work :-( , even the simple function like "show online
>> > user"  --- "no data found"
>> > (While checking by using opensipsctl is ok)
>> >  opensipsctl online
>> > database engine 'MYSQL' loaded
>> > Control engine 'FIFO' loaded
>> > 1001
>> >
>> > Please tell me how to check my CP and its connection to Opensips server?
>> > Thanks !
>> >
>> >
>> >
>> >
>> > ----------------------------------------------------------------------
>> >
>> > Message: 1
>> > Date: Tue, 22 Mar 2011 21:06:21 -0700
>> > From: Dave Singer <dave.singer at wideideas.com>
>> > Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not take
>> >        effect into Opensips Server
>> > To: OpenSIPS users mailling list <users at lists.opensips.org>
>> > Message-ID:
>> >        <AANLkTimB=bQZ1buVKaWzMKq2LM=UsLhEsAQWW+uFrrw7 at mail.gmail.com>
>> > Content-Type: text/plain; charset=ISO-8859-1
>> >
>> > The key I think is usrloc db mode is 0, which means db is not used.
>> > http://www.opensips.org/html/docs/modules/1.6.x/usrloc.html#id292029
>> >
>> > On Tue, Mar 22, 2011 at 6:47 PM, Duong Manh Truong
>> > <ngoahotanglongbk at gmail.com> wrote:
>> >> Dear Dave!
>> >> Thanks for your help.
>> >> I've checked the opensips.cfg again but i still can not find out what
>> >> stuff
>> >> is incorrect ! :-(
>> >> I attached my config file in this email, hope that will help my problem to
>> >> be?clearer!
>> >> If anyone has had the same issue, please tell me how can i check or fix
>> >> it.
>> >> (Hope to receive relatively specific informations)
>> >> Thanks and Best Regards.
>> >>
>> >>
>> >>
>> >> Date: Mon, 21 Mar 2011 08:45:03 -0700
>> >> From: Dave Singer <dave.singer at wideideas.com>
>> >> Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not take
>> >> ? ? ? ?effect into Opensips Server
>> >> To: OpenSIPS users mailling list <users at lists.opensips.org>
>> >> Message-ID:
>> >> ? ? ? ?<AANLkTinGLDzzbUgJgQXOd_93r31hjnHAVAzPMo64K-MQ at mail.gmail.com>
>> >> Content-Type: text/plain; charset=ISO-8859-1
>> >>
>> >> Duong,
>> >>
>> >> Some modules, like drouting, you have to click a reload module button
>> >> in the control pannel.
>> >> However, I think your problem is that you haven't implemented the
>> >> needed stuff in opensips.cfg script.
>> >> CP only provides an interface to managing/accessing the databases
>> >> tables. You still have to impliment the logic in opensips.cfg.
>> >>
>> >> Dave
>> >>
>> >> On Sat, Mar 19, 2011 at 3:04 AM, Duong Manh Truong
>> >> <ngoahotanglongbk at gmail.com> wrote:
>> >>> Hi all,
>> >>> I have followed all instructions about Opensips CP installations
>> >>> After done all configurations, the Web interface is appeared
>> >>> but unfortunately, when i use modules in this interfaces, it seems there
>> >>> is
>> >>> no connection between Opensips CP and Opensips Server Core!
>> >>> Take add/manage users module as an example: I registered user 1001, then
>> >>> i
>> >>> selected this module to show online users
>> >>> => But the result was "no data found" :-(
>> >>> I've created opensips database, correctly insert parameters to opensips
>> >>> CP
>> >>> config files (including mysql user/pass to connect to opensips database)
>> >>> No error found !
>> >>> But i still can not use Opensips CP, someone help me to figure out why
>> >>> Opensips CP has no effect ??
>> >>> Do i misconfig ?(or forget to config) some important parameters to make
>> >>> Opensips CP connect properly to Opensips Server Core?
>> >>> (Something likes authentications........etc)
>> >>> Thanks a lot!
>> >>> _______________________________________________
>> >>> Users mailing list
>> >>>?Users at lists.opensips.org
>> >>>?http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>> >>>
>> >>>
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> Users mailing list
>> >> Users at lists.opensips.org
>> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>> >>
>> >>
>> > _______________________________________________
>> > Users mailing list
>> > Users at lists.opensips.org
>> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>> >
>> >
>

More information about the Users mailing list