[OpenSIPS-Users] Registrar's lookup() function not returning contact with greatest q-value
Pauba, Kevin L
KLPauba at west.com
Thu Aug 5 15:48:56 CEST 2010
I don't modify any of the default settings for the usrloc module.
I'll double check my configuration and "heartbeat" module to make sure the q order will be maintained. There might be something I'm doing to the order when I update the q value (when the responses to the OPTION (heartbeats) are processed).
Thanks for the direction, Bogdan. I'll report back soon.
L8r
-----Original Message-----
From: users-bounces at lists.opensips.org [mailto:users-bounces at lists.opensips.org] On Behalf Of Bogdan-Andrei Iancu
Sent: Wednesday, August 04, 2010 5:04 PM
To: OpenSIPS users mailling list
Subject: Re: [OpenSIPS-Users] Registrar's lookup() function not returning contact with greatest q-value
Pauba,
Strange...especially that the UL SHOW also shows the wrong order....Do
you have the "desc_time_order" param set in USRLOC ?
Regards,
Bogdan
Pauba, Kevin L wrote:
> Bogdan,
>
> I did provide the "b" flag to the lookup() function (see original message below) but it replaced the RURI with the contact with Q=0, not the one with Q=1 as I expected.
>
> The only registrar module parameter that I've changed from the default is this:
>
> modparam("registrar", "min_expires", 0) # turn off checking for minimum expiration time
>
>
> Also, the contacts are saved in the memory cache not in a DB table (using save("location", "m") ). Might that have an effect on the order in which they're retrieved?
>
>
> Thanks!
>
>
> -----Original Message-----
> From: users-bounces at lists.opensips.org [mailto:users-bounces at lists.opensips.org] On Behalf Of Bogdan-Andrei Iancu
> Sent: Wednesday, August 04, 2010 12:11 PM
> To: OpenSIPS users mailling list
> Subject: Re: [OpenSIPS-Users] Registrar's lookup() function not returning contact with greatest q-value
>
> Hi Pauba,
>
> First if you want to get only one contact (even if multiple registered),
> see the "b" flag of the lookup() function:
>
> http://www.opensips.org/html/docs/modules/1.6.x/registrar.html#id271036
>
> Also if more than one contact is returned, they are ordered of their
> value (highest to lowest).
>
> Regards,
> Bogdan
>
> Pauba, Kevin L wrote:
>
>> Hi,
>>
>> According to the registrar documentation module, "... the RURI will be overwritten with the highest-q rated contact ..." when the lookup() function is called. My testing shows that the first matching contact is used.
>>
>> I'm running OpenSIPS V1.6.2. I should mention that I've written a "heartbeat" module that pings the registered contacts periodically and accepts a "load" value in the response that is used to calculate the q-value. A few bits in the Cflags are used to keep track of those that respond back and I've modified the show command to report the meaning of the flags.
>>
>> Here's the snippet from the output of the "opensipsctl ul show":
>>
>> AOR:: hmp
>> Contact:: sip:sip at 10.27.193.121 Q=0
>> Expires:: 5051
>> Callid:: 1 at 10.27.193.121
>> Cseq:: 78
>> User-agent:: oSIP/wicsip-2.11.MR3519
>> State:: CS_NEW
>> Flags:: 1
>> Cflag:: 34 (hb enabled, 0 unanswered)
>> Socket:: udp:10.27.193.119:5060
>> Methods:: 4294967295
>> Contact:: sip:sip at 10.27.194.54 Q=1
>> Expires:: 6782
>> Callid:: 2 at 10.27.194.54
>> Cseq:: 6
>> User-agent:: oSIP/wicsip-3.4.13
>> State:: CS_NEW
>> Flags:: 1
>> Cflag:: 34 (hb enabled, 0 unanswered)
>> Socket:: udp:10.27.193.119:5060
>> Methods:: 4294967295
>>
>> ... and here's a snippet of the openser.cfg file that is related:
>>
>> $var(aor) = "sip:hmp at wic.west.com";
>> lookup("location","b","$var(aor)");
>> xlog("L_DBG", "sending to hmp: $mb, $ru, $rs\n");
>> switch ($retcode) {
>> case -1: # no contact
>> xlog("L_ERR", "01000001 $pp Forwarding to HMP failed -- no registered contact. r-uri: $ru, callid: $ci, p-charging-vector: $(hdr(P-Charging-Vector)), contact: $ct\n");
>> sl_send_reply("404", "Not Found");
>> exit;
>> case -3: # internal error
>> xlog("L_ERR", "01000001 $pp Forwarding to HMP failed. r-uri: $ru, callid: $ci, p-charging-vector: $(hdr(P-Charging-Vector)), contact: $ct\n");
>> sl_send_reply("404", "Not Found");
>> exit;
>> case -2: # method not supported
>> xlog("L_ERR", "01000001 $pp Forwarding to HMP failed. r-uri: $ru, callid: $ci, p-charging-vector: $(hdr(P-Charging-Vector)), contact: $ct\n");
>> sl_send_reply("405", "Not Found");
>> exit;
>> }
>> if (! t_relay() ) {
>> sl_reply_error();
>> }
>> exit;
>>
>> A tcpdump has verified that the first contact listed is the one selected by the lookup() function even though the q-value of that contact is less than the second contact in the list.
>>
>> I'm not interested in parallel forking but, instead, want to forward requests to the least-loaded endpoint. Am I doing something wrong?
>>
>> Thanks!
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>
>
>
--
Bogdan-Andrei Iancu
OpenSIPS Bootcamp
20 - 24 September 2010, Frankfurt, Germany
www.voice-system.ro
_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
More information about the Users
mailing list