[OpenSIPS-Users] SIP/2.0 400 Content Length is Incorrect

Bogdan-Andrei Iancu bogdan at voice-system.ro
Tue Aug 4 17:26:01 CEST 2009


Hi Julien,

yes, the Content len hdt contains the len of the body in chars (what the 
body is, including all the chars in there).

In your case, you send a call from Eyebeam to OpenSIPS and you relay it 
further to another client which replies with the error?

Regards,
Bogdan



Julien Chavanton wrote:
> If I understand correctly Content-Length is the size of the SDP 
> message, I have them here almost unaltered, unless the problem is with 
> line feed/carriage return.
>  
> I did wc and they match, humm not sure where to look.
>  
> ------------------------------------------------------------------------
> This one return "SIP/2.0 400 Content Length is Incorrect (359 vs 356)."
> ------------------------------------------------------------------------
> Content-Length: 360.
> P-hint: Route[6]: mediaproxy .
> .
> v=0.
> o=- 7 2 IN IP4 192.168.101.239.
> s=CounterPath eyeBeam 1.5.
> c=IN IP4 10.0.4.210.
> t=0 0.
> m=audio 51090 RTP/AVP 0 8 18 101.
> a=alt:1 1 : 9xT8sdp8 dJNn6AL5 192.168.101.239 5992.
> a=fmtp:18 annexb=yes.
> a=fmtp:101 0-15.
> a=rtpmap:18 G729/8000.
> a=rtpmap:101 telephone-event/8000.
> a=sendrecv.
> a=x-rtp-session-id:6746FE4B967845A3BC3CE0528E9F9A0D.
> a=direction:active.
> ------------------------------------------------------------------------
>  
> ------------------------------------------------------------------------
> This one return "200 OK"
> ------------------------------------------------------------------------
> Content-Length: 429.
> P-hint: Route[6]: mediaproxy .
> .
> v=0.
> o=- 6 2 IN IP4 10.0.1.71.
> s=CounterPath X-Lite 3.0.
> c=IN IP4 10.0.4.210.
> t=0 0.
> m=audio 51098 RTP/AVP 107 0 8 101.
> a=alt:1 4 : P2r8H0s1 PjFnvrZF 192.168.1.102 50514.
> a=alt:2 3 : Zg++GVqM zvF8qNdi 192.168.114.1 50514.
> a=alt:3 2 : aDT0P1g7 P6eCvs8N 192.168.146.1 50514.
> a=alt:4 1 : E0q9LRE/ m4a2BEWO 10.0.1.71 50514.
> a=fmtp:101 0-15.
> a=rtpmap:107 BV32/16000.
> a=rtpmap:101 telephone-event/8000.
> a=sendrecv.
> a=direction:active.
> ------------------------------------------------------------------------
>
>  
> ------------------------------------------------------------------------
> *From:* users-bounces at lists.opensips.org on behalf of Julien Chavanton
> *Sent:* Wed 29/07/2009 10:40 PM
> *To:* users at lists.opensips.org
> *Subject:* [OpenSIPS-Users] SIP/2.0 400 Content Length is Incorrect
>
> Hi, I have this curious case where when sending call from Eyebeam we 
> receive "SIP/2.0 400 Content Length is Incorrect"
>
> But this is only from one PC, another computer with Eyebeam does not 
> face the same problem.
>
> I will investigate further on my side, but maybe someone as faced this 
> before.
>
>  
>
> Unfortunatly I have altered the data so it is not correct anyway :
>
>  
>
> #
> U 1.1.1.1:40842 -> 3.3.3.3:5060
> INVITE sip:1002123456789 at osip.domain.com SIP/2.0.
> Via: SIP/2.0/UDP 
> 1.1.1.1:40842;branch=z9hG4bK-d8754z-0978ed74e64c0d43-1---d8754z-;rport.
> Max-Forwards: 70.
> Contact: <sip:user at 1.1.1.1:40842>.
> To: "1002123456789"<sip:1002123456789 at osip.domain.com>.
> From: "test"<sip:user at osip.domain.com>;tag=524b8a00.
> Call-ID: Yzc0MmQxMzAyMjI5MDA0OGM5Y2VhYTZjZjQ2NjY5OTM..
> CSeq: 1 INVITE.
> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, 
> SUBSCRIBE, INFO.
> Content-Type: application/sdp.
> User-Agent: eyeBeam release 1101w stamp 50331.
> Content-Length: 344.
> .
> v=0.
> o=- 7 2 IN IP4 1.1.1.1.
> s=CounterPath eyeBeam 1.5.
> c=IN IP4 1.1.1.1.
> t=0 0.
> m=audio 5992 RTP/AVP 0 8 18 101.
> a=alt:1 1 : 9xT8sdp8 dJNn6AL5 1.1.1.1 5992.
> a=fmtp:18 annexb=yes.
> a=fmtp:101 0-15.
> a=rtpmap:18 G729/8000.
> a=rtpmap:101 telephone-event/8000.
> a=sendrecv.
> a=x-rtp-session-id:6746FE4B967845A3BC3CE0528E9F9A0D.
>
> #
> U 2.2.2.2:5060 -> 3.3.3.3:5060
> SIP/2.0 400 Content Length is Incorrect (359 vs 356).
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>   




More information about the Users mailing list