[OpenSER-Users] Help with snmpstats setup

mayamatakeshi mayamatakeshi at gmail.com
Thu Jul 3 17:34:01 CEST 2008


Hi Jeffrey,
thanks for the tip.
Yes, snmpget was not loading openser MIBs (only snmpd was doing it).
I'm almost there but now I have another problem.
Both snmpget and snmpd are now logging this:

Warning: Upper bound not handled correctly (4294967295 != 2147483647): At
line 435 in /usr/share/snmp/mibs/OPENSER-SIP-SERVER-MIB

Maybe there is a version problem between openser and net-snmp. I'll try to
recompile or downgrade net-snmp (I using v. 5.4.1).

Regards,
takeshi

On Thu, Jul 3, 2008 at 10:35 PM, jmagder <jmagder at somanetworks.com> wrote:

> Hello Mayamatakeshi,
>
> The error is from snmpget.  It is basically saying that it doesn't know how
> to translate the openserSIPEntityType into a numerical OID.  There are two
> possibilities for this error.
>
> Firstly, have you copied the MIB files (OPENSER-MIB, OPENSER-REG-MIB,
> OPENSER-SIP-COMMON-MIB, OPENSER-SIP-SERVER-MIB) to the same location as
> NetSNMP's other MIB files?  They are usually located in
> /usr/local/share/snmp/mibs or /usr/share/snmp/mibs.  You can find which
> directory your system is using with "locate SNMPv2-TC.txt". Also, make sure
> your snmp.conf (not the snmpd.conf) file contains:
>
> mibs +ALL
>
> This instructs the snmp command line utilities (snmpget, snmpwalk, etc.),
> to load all MIB files before trying to convert between openserSIPEntityType
> and its numerical OID equivalent.
> Let me know if that works!
>
> - Jeffrey Magder
>
>
>
> mayamatakeshi wrote:
>
>> It seems the doc page has an error.
>> It says to set this at snmpstats.conf:
>> agentXSocket tcp:localhost:705
>> And this when starting snmpd:
>> snmpd -f -Dagentx -x localhost:705 2>&1 | less
>>
>> This will not work because snmpd will use udp by default.
>> So I added 'tcp:' before 'localhost' and after that, I could see some
>> messages like this:
>> agentx/master: handle pdu (req=0x68ab0cd4,trans=0x0,sess=0x7)
>> agentx/master: send response, stat 0 (req=0x68ab0cd4,trans=0x0,sess=0x7)
>> agentx_build: packet built okay
>>
>> But after that, I'm still not able to get anything with snmpget:
>>
>> snmpget -v2c -c public tcp:localhost:705 openserSIPEntityType.0
>> snmpget: Session abort failure (Sub-id not found: (top) ->
>> openserSIPEntityType)
>>
>> On Thu, Jul 3, 2008 at 6:15 PM, mayamatakeshi <mayamatakeshi at gmail.com<mailto:
>> mayamatakeshi at gmail.com>> wrote:
>>
>>    Hello,
>>    I'm trying to test with snmpstats following instruction from
>>    http://www.openser.org/docs/modules/1.3.x/snmpstats.html
>>
>>    From snmpd output, I can see openser is connecting to it, but i
>>    don't see openser uploading any info (I'm running "snmpd -f
>>    -Dagentx -x localhost:705 2>&1 | less"). Then, when I try to get
>>    any openser info using snmpget or snmpwalk, nothing shows up.
>>
>>    Maybe I am missing something (I confirmed snmpd finds and loads
>>    openser MIBs).
>>
>>    Regards,
>>    takeshi
>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.openser.org
>> http://lists.openser.org/cgi-bin/mailman/listinfo/users
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openser.org/pipermail/users/attachments/20080704/f3670dfa/attachment.htm 


More information about the Users mailing list