[OpenSER-Users] OpenSerand RTPProxy, no RTP audio

Eric Phetteplace ericp at nextivr.com
Thu Feb 14 22:20:56 CET 2008


Hello,

Following
http://www.voip-info.org/wiki/index.php?page=OpenSER%20v1.2.x%20and%20RTPPro
xy and cleaning up the errors in the log, I have OpenSER 1.3 and RTPProxy
running in my local domain (192.168.2.10)

I have two SIP phones in my local domain, on two machines. (2.5 and 2.3)

I added an alias via openserctl ul add gail sip:192.168.2.5

Looking at the packets captured from a call between 2.5 and 2.3, 2.3 should
start streaming RTP packets after it ACKs the 200 from 2.5

I call from 192.168.2.5 to gail at 192.168.2.10 and the connection is
established between the three, but no RTP streams ever begin.  I expected to
see 2.3 streaming RTP after it ACKs the 200 from 2.10.

Any suggestions?

Here's my cfg file:

#
# sample config file to be used with nathelper/rtpproxy
#
# start RTPProxy with: rtpproxy -l your_public_ip -s udp:localhost:8899
#

# ----------- global configuration parameters ------------------------

debug=3            # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no    # (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
fork=no
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4

# --- module loading

mpath="/usr/local/lib/openser/modules/"

loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "textops.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "xlog.so"
loadmodule "registrar.so"
loadmodule "mi_fifo.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "xcap_client.so"
loadmodule "nathelper.so"

# --- setting module parameters

modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")

modparam("auth_db","db_url","mysql://openser:secret@127.0.0.1/openser")

modparam("registrar", "received_avp", "$avp(s:rcv)")

modparam("xcap_client", "db_url",
"mysql://openser:secret@127.0.0.1/openser")

# -- usrloc params --
modparam("usrloc", "db_url", "mysql://openser:secret@127.0.0.1/openser")
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "nat_bflag", 3)

# -- registrar params --
modparam("registrar", "received_avp", "$avp(s:rcv)")

# -- auth params --
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")

# -- rr params --
modparam("rr", "enable_full_lr", 1)

# -- nathelper
modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:8899")
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
#modparam("nathelper", "sipping_bflag", 7)
modparam("nathelper", "sipping_from", "sip:pinger at openser.org")
modparam("nathelper", "received_avp", "$avp(s:rcv)")

# -- xlog
modparam("xlog", "buf_size", 8192)

# -- presence params --
modparam("presence|presence_xml|usrloc", "db_url",
"mysql://openser:secret@127.0.0.1/openser")
modparam("presence", "max_expires", 3600)
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address", "sip:127.0.0.1:5060" )


# --- main routing logic
route{
	xlog("***start***\n");
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		xlog("***end - Too Many Hops");
		exit;
	};
	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		xlog("***end - Too big");
		exit;
	};

	# NAT detection
	route(2);

	if (!method=="REGISTER") {
		xlog("***route - recordroute\n");
		record_route();
	}
	if (loose_route()) {
		xlog("***route - looseroute\n");
		append_hf("P-hint: rr-enforced\r\n"); 
		route(1);
	};

	if (!uri==myself) {
		xlog("***route - not myself\n");
		append_hf("P-hint: outbound\r\n"); 
		route(1);
	};

	if (uri==myself) {
		if (method=="REGISTER") {
				xlog("***route - register");
			if (!www_authorize("openser.org", "subscriber")) {
				xlog("***route - challenging");
				www_challenge("openser.org", "0");
				exit;
			};

			if (isflagset(5)) {
				xlog("***route - isflagset(5)");
				setflag(6);
				# if you want OPTIONS natpings uncomment
next
				# setflag(7);
			};
			save("location");
			xlog("***route - registered");
			exit;
		};

		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			xlog("***route - 404, Not found");
			exit;
		};
		append_hf("P-hint: usrloc applied\r\n"); 
	};

	route(1);
	xlog("***end***\n");
}


route[1] {
	xlog("***route1***\n");
	if (subst_uri('/(sip:.*);nat=yes/\1/')){
		xlog("***route[1] - setflag(6)");
		setflag(6);
	};

	if (isflagset(5)||isflagset(6)) {
		xlog("***route[1] - route(3)");
		route(3);
	}

	if (!t_relay()) {
		xlog("***route[1] - error");
		sl_reply_error();
	};
	xlog("***end - route[1]");
	exit;
}

route[2]{
	xlog("***route2***\n");
	force_rport();
	if (nat_uac_test("19")) {
		xlog("***route2 - nat_uac_test(19)\n");
		if (method=="REGISTER") {
			xlog("***route2 - register\n");
			fix_nated_register();
		} else {
			xlog("***route2 - contact\n");
			fix_nated_contact();
		};
		setflag(5);
	};
}

route[3] {
	xlog("***route3***\n");
	if (is_method("BYE|CANCEL")) {
		xlog("***route3 - unforce\n");
		unforce_rtp_proxy();
	} else if (is_method("INVITE")){
		xlog("***route3 - force\n");
		force_rtp_proxy("i");
		t_on_failure("1");
	};
	if (isflagset(5)) {
		xlog("***route3 - isflagset(5)\n");
		search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
	}
	t_on_reply("1");
}

failure_route[1] {
	xlog("***failureroute1***\n");
	if (isflagset(6) || isflagset(5)) {
		xlog("***failroute1 - unforce\n");
		unforce_rtp_proxy();
	}
}

onreply_route[1] {
	xlog("***onreplyroute1***\n");
	if ((isflagset(5) || isflagset(6)) && status=~"(183)|(2[0-9][0-9])")
{
		xlog("***onreplyroute1 - force\n");
		force_rtp_proxy("i");
	}
	search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');

	if (isflagset(6)) {
		xlog("***onreplyroute1 - contact\n");
		fix_nated_contact();
	}
	xlog("***end - onreplyrout[1]");
	exit;
}


Thanks,

Eric 






More information about the Users mailing list