[OpenSER-Users] Only a single phone will register

[Bogdan-Andrei Iancu]

Hi Dave,

when you try to register the following phones, what reply you get 
(except 401) ? also, do you use the same user for all the phones or 
separate users ?

"max_slot" is just an info. It says what was the maximum records in the 
location table so far.

Regards,
Bogdan

Dave Poirier wrote:
> Hello All,
> I setup my Openser 1.3 and mysql. Authentication seems to work for 
> only the first phone that registers. I did a tcpdump from the server 
> and the rest of the phones get a 401 unauthorized. I can go into mysql 
> and actually see the correct username password in the database. I also 
> double checked it on the phones. Like I said... all three of the 
> phones will register but only if they are the first. Is it something 
> obvious that I'm missing? Anyone else run into this? If I do a 
> "openserctl ul show" (with debug on) I get the following output....
>
> database engine 'MYSQL' loaded
> Control engine 'FIFO' loaded
> entering fifo_cmd ul_dump
> Domain:: location table=512 records=1 max_slot=1
>     AOR:: 1024
>         Contact:: sip:1024 at 172.17.5.118:5060 
> <http://sip:1024@172.17.5.118:5060> Q=
>             Expires:: 2657
>             Callid:: d35614ae-9db18357-7bd13fe4 at 172.17.5.118 
> <mailto:d35614ae-9db18357-7bd13fe4 at 172.17.5.118>
>             Cseq:: 2
>             User-agent:: PolycomSoundPointIP-SPIP_550-UA/3.0.0.0258
>             State:: CS_NEW
>             Flags:: 0
>             Cflag:: 0
>             Socket:: udp:198.236.66.129:5060 <http://198.236.66.129:5060>
>             Methods:: 8063
> FIFO command was:
> :ul_dump:openser_receiver_22488
>
> Is the "max_sot=1" a concern? If so I am at a loss for where to change it.
>
> Thanks for any help,
> Dave
>
> -- 
> David Poirier
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at lists.openser.org
> http://lists.openser.org/cgi-bin/mailman/listinfo/users
>