Fwd: [Users] SNMPstats module not returning data
Sergio Gutierrez
saguti at gmail.com
Thu Mar 29 18:36:08 CEST 2007
Thanks Terry
But now there is a Problem (I just reported either).
When I run openser with fork=yes, it crashes!
I have an open thread which begun by reporting an issue about openser
crashin when compiled on 64 bits; right now it is running compiled on 32
bits, but, when it is started with for=yes, it crashes.
This is the URL of the report.
http://openser.org/pipermail/users/2007-March/010035.html
Thanks!
On 3/29/07, Terry Robert <terryrobert at shaw.ca> wrote:
>
>
> I experienced the same problem with the SNMPstats module. If you run
> openser in foreground mode (fork=no), the module doesn't initialize. Running
> in background mode fixes the problem.
>
>
>
> ---------- Forwarded message ----------
> From: "Sergio Gutierrez" <saguti at gmail.com>
> To: jmagder at somanetworks.com
> Date: Thu, 29 Mar 2007 10:59:26 -0500
> Subject: Re: Fwd: [Users] SNMPstats module not returning data
> Hi Jeffrey,
>
> This is the log of the agent when is started in debug mode, and later
> Openser is started:
>
> /opt/net-snmp/sbin/snmpd -f -Dagentx -x tcp:localhost:705 2>&1
> No log handling enabled - turning on stderr logging
> registered debug token agentx, 1
> agentx_register_app_config_handler: registering .conf token for
> "agentxsocket"
> agentx_register_app_config_handler: registering .conf token for
> "agentxperms"
> agentx_register_app_config_handler: registering .conf token for
> "agentxRetries"
> agentx_register_app_config_handler: registering .conf token for
> "agentxTimeout"
> Turning on AgentX master support.
> agentx/master: initializing...
> agentx/master: initializing... DONE
> NET-SNMP version 5.4
> agentx/master: unexpected callback op 4
> agentx/master: handle pdu (req=0x54fb3d2b,trans=0x0,sess=0x0)
> agentx/master: open 0018efc0
> agentx/master: opened 001ad130 = 5 with flags = a0
> agentx/master: send response, stat 0 (req=0x54fb3d2b,trans=0x0,sess=0x0)
> agentx_build: packet built okay
>
> I have tried changing too the keywork agentXsocket to agentXSocket, and
> with a minimal snmpd config, and still reports error:
>
> # /opt/net-snmp/bin/snmpwalk -v 2c -c public localhost .1.3.6.1.4.1.27483
> OPENSER-REG-MIB::openser = No Such Object available on this agent at this
> OID
>
> And the snmpd log:
>
> agentx/master: send response, stat 0 (req=0x54fb3d2f,trans=0x0,sess=0x0)
> agentx_build: packet built okay
> agentx/master: handle pdu (req=0x54fb3d30,trans=0x0,sess=0x5)
> agentx/master: send response, stat 0 (req=0x54fb3d30,trans=0x0,sess=0x5)
> agentx_build: packet built okay
>
> Thanks!
>
>
> On 3/29/07, Jeffrey Magder <jmagder at somanetworks.com > wrote:
> >
> > It looks like there is communication going on between the NetSNMP master
> > agent, and OpenSER's SNMPStats sub-agent. Would you be able to provide
> > me some more of the /var/log/snmpd.log snmpd logs? Specifically, I'm
> > looking for what happens after:
> >
> > Turning on AgentX master support.
> > agentx/master: initializing...
> > agentx/master: initializing... DONE
> > NET-SNMP version 5.3.1
> >
> > There should be something similar to the following:
> >
> > agentx/master: unexpected callback op 4
> > agentx/master: handle pdu (req=0x1da53a0c,trans=0x0,sess=0x0)
> > agentx/master: open 0x81137c8
> > agentx/master: opened 0x814b558 = 6 with flags = a0
> > agentx/master: send response, stat 0 (req=0x1da53a0c,trans=0x0,sess=0x0)
> >
> >
> > If thats there, I'm wondering if you have set up any special view
> > restrictions for certain parts of the OID Tree given a certain community
> > strings?
> > Perhaps it would be helpful to rule that out with a minimal snmpd.conf
> > file containing only:
> >
> > rocommunity public
> > master agentx
> >
> > Finally, I don't think this matters (it doesn't matter on my system),
> > but could you change:
> >
> > agentXsocket tcp:localhost:705 ---> agentXSocket tcp:localhost:705
> >
> > The "S" wasn't capitalized. :-)
> >
> > Thanks again!
> >
> > - Jeffrey Magder
> >
> > Sergio Gutierrez wrote:
> > > Hi Jefrey
> > >
> > > Thanks for your answer.
> > >
> > > I will reply every point:
> > >
> > > # /opt/net-snmp/bin/snmpwalk -v 2c -c community localhost
> > > .1.3.6.1.4.1.27483
> > > OPENSER-REG-MIB::openser = No Such Object available on this agent at
> > > this OID
> > >
> > > # ps -ef | grep snmpd
> > > root 1649 579 0 17:50:07 pts/2 0:17
> > > /opt/net-snmp/sbin/snmpd -d -f -Dagentx -x tcp:localhost:705
> > > root 2935 2778 0 09:59:21 pts/3 0:00 grep snmpd
> > > (I am running debug mode; the syntax of ps command is a little bti
> > > different because I am using Solaris)
> > >
> > > # grep -i agentx /var/log/snmpd.log
> > > agentx_build: packet built okay
> > > agentx/master: handle pdu (req=0x3ac55fdb,trans=0x0,sess=0xf)
> > > agentx/master: send response, stat 0
> > (req=0x3ac55fdb,trans=0x0,sess=0xf)
> > > agentx_build: packet built okay
> > > agentx/master: handle pdu (req=0x3ac55fdc,trans=0x0,sess=0xf)
> > > agentx/master: send response, stat 0
> > (req=0x3ac55fdc,trans=0x0,sess=0xf)
> > > agentx_build: packet built okay
> > > agentx/master: handle pdu (req=0x3ac55fdd,trans=0x0,sess=0xf)
> > > agentx/master: send response, stat 0
> > (req=0x3ac55fdd,trans=0x0,sess=0xf)
> > > agentx_build: packet built okay
> > > ...
> > >
> > > # cat /opt/net-snmp/share/snmp/snmpstats.conf
> > > agentXsocket tcp:localhost:705
> > >
> > > # cat /opt/net-snmp/share/snmp/snmpd.conf
> > > syslocation XXXX
> > > syscontact XXXX
> > > agentaddress udp:161
> > > rocommunity community localhost
> > > master agentx
> > >
> > > As you can see, both of the files are located at the same directory.
> > >
> > > Finally, I do have tried the check. I can see Openser starts OK and
> > > the master agent receives the connection of the sub agent.
> > >
> > > Thank you very much for your help.
> > >
> > > Kind regards.
> > >
> > > Sergio G.
> > >
> > >
> > >
> > >
> > >
> > > On 3/29/07, *jmagder* < jmagder at somanetworks.com
> > > <mailto: jmagder at somanetworks.com>> wrote:
> > >
> > > Hi Sergio,
> > >
> > > First off, could you try running "/opt/net-snmp/bin/snmpwalk -v 2c
> > -c
> > > community sipserver .1.3.6.1.4.1.27483"? If that isn't
> > succeeding,
> > > then it would greatly help me debug your problem if you could
> > > answer the
> > > following questions:
> > >
> > > 1) What is the output of "ps aux | grep snmpd"?
> > >
> > > 2) What is the output of "cat /var/log/messages | grep AgentX"
> > >
> > > 3) Can you show me the contents of snmpstats.conf ?
> > >
> > > 4) Does snmpd.conf contain "master agentx"?
> > >
> > > 5) Is snmpd.conf located in the same directory as snmpstats.conf?
> > >
> > > 6) Have you tried the steps in "Testing for a proper
> > > Configuration" in
> > > section 1.6.4?
> > >
> > > Thanks Sergio!
> > >
> > > - Jeffrey Magder
> > >
> > > Sergio Gutierrez wrote:
> > > > Hi list.
> > > >
> > > > I have installed Openser 1.2.0, with Net-snmp version 5.4 to
> > support
> > > > the SNMPstats module. I have configured the subagent according
> > to
> > > the
> > > > instructions on the documentation, but I am not being able to
> > obtain
> > > > any data.
> > > >
> > > > I am running both products on Solaris 10 Sparc.
> > > >
> > > > # /opt/net-snmp/bin/snmpwalk -v 2c -c community sipserver
> > > > .1.3.6.1.4.1.27483.3.1.1.1.1.1.1
> > > > SNMPv2-SMI::enterprises.27483.3.1.1.1.1.1 = No Such Object
> > available
> > > > on this agent at this OID
> > > >
> > > > # /opt/net-snmp/bin/snmpwalk -v 2c -c community sipserver
> > > > openserSIPProtocolVersion
> > > > SNMPv2-SMI::enterprises.27483.3.1.1.1.1.1 = No Such Object
> > available
> > > > on this agent at this OID
> > > >
> > > > Is there any other thing I should do after compiling and
> > > configuring?
> > > >
> > > > Thanks in advance for your attention
> > > >
> > > > Kind Regards.
> > > >
> > > > Sergio Gutiérrez
> > > >
> > > >
> > > >
> > > >
> > ------------------------------------------------------------------------
> > >
> > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users at openser.org <mailto: Users at openser.org>
> > > > http://openser.org/cgi-bin/mailman/listinfo/users
> > > >
> > >
> > >
> >
> >
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20070329/19db4bb3/attachment.htm
More information about the Users
mailing list