[Users] Compiling Openser for best performance on Solaris SPARC

Sergio Gutierrez saguti at gmail.com
Wed Mar 21 20:44:34 CET 2007


Hi Daniel.

Some time ago, I tried to compile Openser for 64 bits, but I had problems
with libradiusclient, when It was compiled for 64 bits.

Is that problem solved? Could I run Openser + MySQL + Radius support
compiled as 64 bit?

Kind regards.

Sergio G.

On 3/21/07, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
>
> Hello,
>
> On 03/21/07 20:14, Sergio Gutierrez wrote:
> > Hi Daniel.
> >
> > I am repeating the test using 6 instances of SIPp, and I am having a
> > better performance.
> >
> > A question. In the page you have listed that the Proxy and UAS runs on
> > a 64 bit machine. Was the compilation done to generate a 64 bit
> > executable?
> yes, it was 64bit executable. OS is Debian amd64.
>
> Cheers,
> Daniel
>
> >
> > Thanks.
> >
> > Kind regards.
> >
> > Sergio Gutierrez
> >
> > On 3/21/07, *Sergio Gutierrez* <saguti at gmail.com
> > <mailto:saguti at gmail.com>> wrote:
> >
> >     Hi Daniel.
> >
> >     Thanks for your answer.
> >
> >     My configs are as the same used in published tests, and my UAS, as
> >     described is another instance of Openser.
> >
> >     I will try what you sugest.
> >
> >     Thanks.
> >
> >     Sergio Gutiérrez.
> >
> >
> >     On 3/21/07, *Daniel-Constantin Mierla* < daniel at voice-system.ro
> >     <mailto:daniel at voice-system.ro>> wrote:
> >
> >         Hello,
> >
> >         do you use same configs as in published tests? The UAS is
> another
> >         openser with just sending a 200 ok reply or sipp with uas
> >         scenario?
> >
> >         First check what is the capacity of sipp -- make a very simple
> >         config
> >         with just sl_send_reply("200","ok") in main route and start
> >         sipp. See
> >         what results you get and that should be the reference for sipp
> >         capacity.
> >         Also, try to use multiple instances of sipp, from different
> >         servers, see
> >         if you get the cumulative value better.
> >
> >         The tests were done on Core2 processor, and parallel execution
> of
> >         openser processes has some impact as well.
> >
> >         Cheers,
> >         Daniel
> >
> >
> >         On 03/21/07 16:52, Sergio Gutierrez wrote:
> >         > Hi.
> >         >
> >         > Currently I am installing Openser 1.2.0 on a Sun Fire T2000
> >         running
> >         > Solaris 10.
> >         > Although I used an optimized version of GCC for SPARC
> >         Systems, and
> >         > used the recommended settings to generate accurate code for my
> >         > Processor (UltraSPARC T1), the results of the performance
> >         tests are
> >         > just 50% of the presented ones on the web page.
> >         >
> >         > My setup is the following:
> >         >
> >         > Proxy and UAS: Sun Fire T2000, 8 GB RAM, 1 UltraSPARC T1 1.2
> >         GHZ 6 Core.
> >         > UAC's: Two domain of a Sun Fire 12K, 4 GB RAM, 4 UlraSPARC
> >         III+ 900 Mhz
> >         > Software versions listed as on the webpage.
> >         >
> >         > openser -V output:
> >         > version: openser 1.2.0-notls (sparc/solaris)
> >         > flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE,
> USE_MCAST,
> >         > SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
> >         FAST_LOCK-ADAPTIVE_WAIT-NOSMP
> >         > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144,
> >         MAX_LISTEN 16,
> >         > MAX_URI_SIZE 1024, BUF_SIZE 65535
> >         > poll method support: poll, select, /dev/poll.
> >         > svnrevision: unknown
> >         > @(#) $Id: main.c 1827 2007-03-12 15:22:53Z bogdan_iancu $
> >         > main.c compiled on 21:43:51 Mar 19 2007 with gcc 4.0.3
> >         >
> >         >
> >         > I would thank any idea about how could I improve the
> >         performnace of my
> >         > setup. I think that because of the hardware specifications,
> >         the result
> >         > should be at least equal than listed.
> >         >
> >         > Thanks in advance.
> >         >
> >         > Kind regards.
> >         >
> >         > Sergio Gutiérrez.
> >         >
> >         >
> ------------------------------------------------------------------------
> >         >
> >         > _______________________________________________
> >         > Users mailing list
> >         > Users at openser.org <mailto:Users at openser.org>
> >         > http://openser.org/cgi-bin/mailman/listinfo/users
> >         >
> >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20070321/de2a0a7d/attachment.htm 


More information about the Users mailing list