[Users] error editing openser.cfg

[Bogdan-Andrei Iancu]

Hi,

take a look in the log file to get more hints about the error.

Regards,
bogdan

Javier Allende Astigarraga wrote:
> i follow this instrucctions and when i execute open ser appear one 
> failure,
>
> this is the openser.cfg
>
> #
> # $Id: openser.cfg,v 1.6.2.1 <http://1.6.2.1> 2006/07/17 15:51:03 
> klaus_darilion Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> debug=3            # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=no    # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> fork=no
> log_stderror=yes
> */
>
> check_via=no    # (cmd. line: -v)
> dns=no          # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/openser_fifo"
>
> #
> # uncomment the following lines for TLS support
> #disable_tls = 0
> #listen = tls:your_IP:5061
> #tls_verify_server = 1
> #tls_verify_client = 1
> #tls_require_client_certificate = 0
> #tls_method = TLSv1
> #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
> #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
> #tls_ca_list = "/usr/local/etc/openser/tls/user/user- calist.pem"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/openser/modules/mysql.so"
>
> loadmodule "/usr/local/lib/openser/modules/sl.so"
> loadmodule "/usr/local/lib/openser/modules/tm.so"
> loadmodule "/usr/local/lib/openser/modules/rr.so"
> loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/openser/modules/usrloc.so"
> loadmodule "/usr/local/lib/openser/modules/registrar.so"
> loadmodule "/usr/local/lib/openser/modules/textops.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/openser/modules/auth.so"
> loadmodule "/usr/local/lib/openser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode",   0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this 
> config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> # -------------------------  request routing logic -------------------
>
> # main routing logic
>
> route{
>
>     # initial sanity checks -- messages with
>     # max_forwards==0, or excessively long requests
>     if (!mf_process_maxfwd_header("10")) {
>         sl_send_reply("483","Too Many Hops");
>         exit;
>     };
>
>     if (msg:len >=  2048 ) {
>         sl_send_reply("513", "Message too big");
>         exit;
>     };
>
>     # we record-route all messages -- to make sure that
>     # subsequent messages will go through our proxy; that's
>     # particularly good if upstream and downstream entities
>     # use different transport protocol
>     if (!method=="REGISTER")
>         record_route();
>
>     # subsequent messages withing a dialog should take the
>     # path determined by record-routing
>     if (loose_route()) {
>         # mark routing logic in request
>         append_hf("P-hint: rr-enforced\r\n");
>         route(1);
>     };
>
>     if (!uri==myself) {
>         # mark routing logic in request
>         append_hf("P-hint: outbound\r\n");
>         # if you have some interdomain connections via TLS
>         #if(uri=~"@tls_domain1.net") {
>         #    t_relay("tls: domain1.net <http://domain1.net>");
>         #    exit;
>         #} else if(uri=~"@tls_domain2.net") {
>         #    t_relay("tls:domain2.net <http://domain2.net>");
>         #    exit;
>         #}
>         route(1);
>     };
>
>     # if the request is for other domain use UsrLoc
>     # (in case, it does not work, use the following command
>     # with proper names and addresses in it)
>     if (uri==myself) {
>
>         if (method=="REGISTER") {
>
>             # Uncomment this if you want to use digest authentication
>         #    if (!www_authorize(" openser.org <http://openser.org>", 
> "subscriber")) {
>         #        www_challenge("openser.org <http://openser.org>", "0");
>                 #exit;
>         #        break;
>         #    };
>
>             save("location");
>             exit;
>         };
>
>         lookup("aliases");
>         if (!uri==myself) {
>             append_hf("P-hint: outbound alias\r\n");
>             route(1);
>         };
>
>         # native SIP destinations are handled using our USRLOC DB
>         if (!lookup("location")) {
>             sl_send_reply("404", "Not Found");
>             exit;
>         };
>         append_hf("P-hint: usrloc applied\r\n");
>     };
>
>     route(1);
> }
>
>
> route[1] {
>     # send it out now; use stateful forwarding as it works reliably
>     # even for UDP2TCP
>     if (!t_relay()) {
>         sl_reply_error();
>     };
>     exit;
> }
>
>
> thanks for all
>
> -- 
> =====================================================
> Legolas_Bilbao[ID2006][GKR]
> Dios creo un equipo Perfecto a los demas los lleno de extranjeros
> http://www.forosindicedonkey.com
> http://usuarios.lycos.es/ligaforo/ <http://usuarios.lycos.es/ligaforo/>
> =====================================================
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>