[Users] Cannot start openser 1.1

Wed Sep 20 11:23:49 CEST 2006

Hi George,

first of all the question is  : are you planning to use TCP support in 
openser?  epoll is used only for TCP, so, if you do not use it, just 
disable TCP compiling in openser - see the USE_TCP is Makefile.defs.

If you want to TCP, my advice will be to enable epoll in the kernel - 
you will get better performance.

regards,
bogdan

Papadopoulos Georgios wrote:

>Hello Daniel,
>
>Thank you for the response. Which is better, disabling epoll in openser,
>or enabling epoll in the kernel?
>
>George 
>
>  
>
>>-----Original Message-----
>>From: Daniel-Constantin Mierla [mailto:daniel at voice-system.ro] 
>>Sent: Wednesday, September 20, 2006 11:40 AM
>>To: Papadopoulos Georgios
>>Cc: users at openser.org
>>Subject: Re: [Users] Cannot start openser 1.1
>>
>>Seems that epoll was disabled from kernel. Is it right?
>>
>>If yes, disable epoll at compilation:
>>
>>make proper
>>NO_EPOLL=1 make all
>>NO_EPOLL=1 make install
>>
>>
>>also, there are some escape in the replacement string of 
>>avp_subst() which shouldn't.
>>
>>Cheers,
>>Daniel
>>
>>
>>On 09/20/06 11:31, Papadopoulos Georgios wrote:
>>    
>>
>>>hello,
>>>
>>>After using OpenSer 1.0 successfully for about a year, I am 
>>>      
>>>
>>trying to 
>>    
>>
>>>migrate to 1.1. My configuration has not changed (except 
>>>      
>>>
>>for changes 
>>    
>>
>>>in the avp functions due to the new syntax). However I 
>>>      
>>>
>>cannot get the 
>>    
>>
>>>process started. Below you can see the output that I am getting. It 
>>>seems like some poll function is missing.
>>>
>>>Any help will be very welcome. Thank you.
>>>
>>>George Papadopoulos
>>>
>>>
>>># uname -a
>>>Linux Fury 2.6.17-gentoo-r8 #1 Fri Sep 15 16:47:15 EEST 
>>>      
>>>
>>2006 sparc64 
>>    
>>
>>>sun4u TI UltraSparc II  (BlackBird) GNU/Linux
>>>
>>>
>>>#
>>> 0(17608) WARNING: fix_socket_list: could not rev. resolve 
>>>172.31.100.6
>>> 0(17608) WARNING: fix_socket_list: could not rev. resolve 
>>>172.31.100.7
>>> 0(17608) WARNING: fix_socket_list: could not rev. resolve 
>>>172.31.100.6
>>> 0(17608) WARNING: fix_socket_list: could not rev. resolve 
>>>172.31.100.7 Listening on
>>>             udp: 172.31.100.5 [172.31.100.5]:5060
>>>             udp: 172.31.100.6 [172.31.100.6]:5060
>>>             udp: 172.31.100.7 [172.31.100.7]:5060
>>>             tcp: 172.31.100.5 [172.31.100.5]:5060
>>>             tcp: 172.31.100.6 [172.31.100.6]:5060
>>>             tcp: 172.31.100.7 [172.31.100.7]:5060
>>>Aliases: 
>>>             tcp: Fury:5060
>>>             tcp: Fury.acn.gr:5060
>>>             udp: Fury:5060
>>>             udp: Fury.acn.gr:5060
>>>             *: sip.altecnet.gr:*
>>>             *: altecnet.gr:*
>>>
>>> 0(17608) init_tcp: using epoll_lt as the io watch method (auto
>>>detected)
>>> 0(0) INFO: statistics manager successfully initialized
>>> 0(0) StateLess module - initializing
>>> 0(0) TM - initializing...
>>>Fury sbin #  0(0) Maxfwd module- initializing
>>> 0(0) TextOPS - initializing
>>> 0(0) AVPops - initializing
>>> 0(0) permissions - initializing
>>> 0(0) WARNING: File not found: /usr/local/etc/ser/permissions.allow
>>> 0(0) Default allow file (/usr/local/etc/ser/permissions.allow) not 
>>>found => empty rule set
>>> 0(0) WARNING: File not found: /usr/local/etc/ser/permissions.deny
>>> 0(0) Default deny file (/usr/local/etc/ser/permissions.deny) not 
>>>found => empty rule set
>>> 0(0) AUTH module - initializing
>>> 0(0) AUTH_DB module - initializing
>>> 0(0) subst_parser: WARNING: \* unknown escape in 
>>>/(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/
>>> 0(0) subst_parser: WARNING: \! unknown escape in 
>>>/(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/
>>> 0(0) subst_parser: WARNING: \^ unknown escape in 
>>>/(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/
>>> 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of 
>>><Remote-Party-ID>
>>> 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of 
>>><Remote-Party-ID>
>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784
>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 237568
>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784
>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 237568
>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784
>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 237568
>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784
>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 237568
>>> 1(17622) INFO: fifo process starting: 17622
>>>15(17649) ERROR: init_epoll: epoll_create: Function not implemented 
>>>[90]
>>>15(17649) ERROR: init_io_wait: epoll init failed
>>>15(17649) ERROR: tcp_receive_loop: exiting...16(17650) ERROR:
>>>init_epoll: epoll_create: Function not implemented [90]
>>>16(17650) ERROR: init_io_wait: epoll init failed
>>>16(17650) ERROR: tcp_receive_loop: exiting...17(17651) ERROR:
>>>init_epoll: epoll_create: Function not implemented [90]
>>>17(17651) ERROR: init_io_wait: epoll init failed
>>>17(17651) ERROR: tcp_receive_loop: exiting...18(17652) ERROR:
>>>init_epoll: epoll_create: Function not implemented [90]
>>>18(17652) ERROR: init_io_wait: epoll init failed
>>>18(17652) ERROR: tcp_main_loop: exiting... 0(17610) child process 
>>>17649 exited normally, status=255
>>> 0(17610) child process 17650 exited normally, status=255
>>> 0(17610) child process 17651 exited normally, status=255
>>> 0(17610) child process 17652 exited normally, status=255
>>> 0(17610) INFO: terminating due to SIGCHLD
>>> 1(17622) INFO: signal 15 received
>>> 2(17623) INFO: signal 15 received
>>> 3(17624) INFO: signal 15 received
>>> 4(17625) INFO: signal 15 received
>>>14(17648) INFO: signal 15 received
>>>13(17642) INFO: signal 15 received
>>>12(17641) INFO: signal 15 received
>>>11(17640) INFO: signal 15 received
>>>10(17639) INFO: signal 15 received
>>> 9(17638) INFO: signal 15 received
>>> 8(17632) INFO: signal 15 received
>>> 7(17631) INFO: signal 15 received
>>> 6(17630) INFO: signal 15 received
>>> 5(17629) INFO: signal 15 received
>>>
>>>Disclaimer
>>>The information in this e-mail and any attachments is 
>>>      
>>>
>>confidential. It is intended solely for the attention and use 
>>of the named addressee(s). If you are not the intended 
>>recipient, or person responsible for delivering this 
>>information to the intended recipient, please notify the 
>>sender immediately. Unless you are the intended recipient or 
>>his/her representative you are not authorized to, and must 
>>not, read, copy, distribute, use or retain this message or 
>>any part of it. E-mail transmission cannot be guaranteed to 
>>be secure or error-free as information could be intercepted, 
>>corrupted, lost, destroyed, arrive late or incomplete, or 
>>contain viruses.
>>    
>>
>>>_______________________________________________
>>>Users mailing list
>>>Users at openser.org
>>>http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>>>  
>>>      
>>>
>
>_______________________________________________
>Users mailing list
>Users at openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>  
>