[Users] how to run openser through monit daemon?

Padmaja RV padmaja.rv at vodcalabs.com
Fri May 26 13:25:35 CEST 2006


Hi all!
I have installed openser through CVS from the following link
http://openser.org/dokuwiki/doku.php?id=install_and_maintain_openser_from_cvs

till the 8 th step in the link everything went well fine. in the 9 th step, 
there is a link to make oepnser.init script work and i did all the steps as 
described. I downloaded and installed the monit daemon to start openser thru 
it. however, now if i type /etc/init.d/openser start, it says command monit 
to start openser and then the command prompt appears back. i dont see the 
tcp and udp ports (5060 ) and other information etc when the openser is 
started.....and i cant figure out if it is running at all.....if i issue ps 
command, i dont see any pid for openser.....if i open the web interface of 
the monit daemon, i see that it is trying to start the openser but after 
some time it shows failed to start......

please let me know what to do asap.....
Thanks


----- Original Message ----- 
From: <users-request at openser.org>
To: <users at openser.org>
Sent: Friday, May 26, 2006 3:30 PM
Subject: Users Digest, Vol 12, Issue 71


> Send Users mailing list submissions to
> users at openser.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://openser.org/cgi-bin/mailman/listinfo/users
> or, via email, send a message with subject or body 'help' to
> users-request at openser.org
>
> You can reach the person managing the list at
> users-owner at openser.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Users digest..."
>
>
> Today's Topics:
>
>   1. Re: How to extract sip-id when using alias-id?
>      (Bogdan-Andrei Iancu)
>   2. Route Algorithm. (raviprakash sunkara)
>   3. Re: Forward SUBSCRIBER (Bogdan-Andrei Iancu)
>   4. RE: 2 Openser Instances (Sam Lee)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 26 May 2006 12:35:21 +0300
> From: Bogdan-Andrei Iancu <bogdan at voice-system.ro>
> Subject: Re: [Users] How to extract sip-id when using alias-id?
> To: Frogger <froggerandbongo at yahoo.com>
> Cc: users at openser.org
> Message-ID: <4476CBD9.80002 at voice-system.ro>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> Hi,
>
> what you can do is to save into an AVP the alias before doing
> lookup(aliases). In failure route, before sending to voicemail, push the
> AVP into RURI to have the alias and not the sip id.
>
> regards,
> bogdan
>
> Frogger wrote:
>
>>Good point.
>>I need to clarify...
>>
>>The alias is working to route to the user however if
>>the timer expires, the route fails or if there is a
>>reject, the failure routes are applying their logic to
>>the alias-id not the sip-id.
>>
>>What I need to do is apply the failure route logic to
>>the sip-id so we can send the attempt to voicemail.
>>
>>Let say I have an alias of 1000 at sip.com for sip-id
>>5551212 at sip.com.
>>
>>When 1000 at sip.com is dialed by another user in the
>>domain (I am using "use_domain") the call is properly
>>routed to:  5551212 at sip.com.
>>
>>However, if 5551212 at sip.com does not answer, timer
>>expires, or a reject, then the failure logic is be
>>applied to the alias.
>>
>>Failure route says:
>>
>>prefix("66");
>>append_branch();
>>append_urihf("CC-Diversion: ", "\r\n");
>>t_relay();
>>
>>
>>Result of the failure logic:
>>
>>661000 at sip.com
>>
>>Needs to be:
>>
>>665551212 at sip.com
>>
>>
>>Thoughts?
>>
>>F
>>
>>
>>--- Bogdan-Andrei Iancu <bogdan at voice-system.ro>
>>wrote:
>>
>>
>>
>>>Hi,
>>>
>>>not sure I understand - you dial an alias and via
>>>db_aliases you replace
>>>the alias with the sip-id. So you have the sip-id ..
>>>where is the problem?
>>>
>>>regards,
>>>bogdan
>>>
>>>Frogger wrote:
>>>
>>>
>>>
>>>>I am using alias_db to store alias's for users.
>>>>
>>>>However when an alias is dialed I need to also be
>>>>
>>>>
>>>able
>>>
>>>
>>>>to restore the alias owners original sip-id.
>>>>
>>>>This is necessary to forward the call to voicemail
>>>>using sip-id.
>>>>
>>>>Any guidance on getting the sip-id out of the
>>>>
>>>>
>>>alias_db
>>>
>>>
>>>>and replacing the alias-id prior to forwarding to
>>>>vmail?
>>>>
>>>>Thanks in advance!
>>>>
>>>>F
>>>>
>>>>__________________________________________________
>>>>Do You Yahoo!?
>>>>Tired of spam?  Yahoo! Mail has the best spam
>>>>
>>>>
>>>protection around
>>>
>>>
>>>>http://mail.yahoo.com
>>>>
>>>>_______________________________________________
>>>>Users mailing list
>>>>Users at openser.org
>>>>http://openser.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>__________________________________________________
>>Do You Yahoo!?
>>Tired of spam?  Yahoo! Mail has the best spam protection around
>>http://mail.yahoo.com
>>
>>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 26 May 2006 05:38:23 -0400
> From: "raviprakash sunkara" <sunkara.raviprakash.feb14 at gmail.com>
> Subject: [Users] Route Algorithm.
> To: Users at openser.org, "Klaus Darilion"
> <klaus.mailinglists at pernau.at>, daniel at voice-system.ro,
> nickm at kryptontech.com
> Message-ID:
> <f0f0f9340605260238l2e6ce419qd109b6f97e57c485 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi listers and  Users.
>
> Please help me in " how to make a call from one place to other place in
> route algorithm "
>
>
> I got Call not approved ? what is this and also $04 and $08 messages as 
> not
> found and request timeout........
>
>
> It connect ( REgister) to server .
>
> server respond as 1 st  " 200 ok " and then " 408 request time out....
>
> plesse help me
>
> Bye..
> -- 
> Thanks and Regards with cheers
> Sunkara Ravi Prakash (Voip Developer)
> Hyperion Technology
> www.hyperion-tech.com
> <b>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> http://openser.org/pipermail/users/attachments/20060526/afad0b31/attachment.html
>
> ------------------------------
>
> Message: 3
> Date: Fri, 26 May 2006 12:42:55 +0300
> From: Bogdan-Andrei Iancu <bogdan at voice-system.ro>
> Subject: Re: [Users] Forward SUBSCRIBER
> To: Javier Ramirez <jvr_78 at yahoo.com.ar>
> Cc: users at openser.org
> Message-ID: <4476CD9F.4060808 at voice-system.ro>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi,
>
> as I see you are trying to use the PA for presence - that's a different
> story. So, what do you want:
>
> 1) presence end-2-end directly between end-users
> 2) presence via PA - the users will talk only with the PA and not 
> directly.
>
> regards,
> bogdan
>
> Javier Ramirez wrote:
>
>> I read all documentation from internet, and nothing.
>>
>> please
>>
>>
>> if (method=="SUBSCRIBE") {
>>
>>        if (!t_newtran()) {
>>
>>            sl_reply_error();
>>
>>        };
>>
>>        handle_subscription("registrar");
>>
>>    # break;
>>
>> };
>>
>>
>>
>>
>>
>> when I coment the "break;" the SUBSCRIBER message is forward to B user.
>>
>> if I don´t coment the break, the SUBSCRIBER end in OpenSER.
>>
>>
>>
>> why ?
>>
>>
>>
>> best Regards
>>
>> Javier
>>
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 26 May 2006 17:45:44 +0800
> From: "Sam Lee" <sam.lee at super.net.sg>
> Subject: RE: [Users] 2 Openser Instances
> To: "Klaus Darilion" <klaus.mailinglists at pernau.at>
> Cc: users at openser.org
> Message-ID:
> <A0E9DBAAF59F2C49AB566EC7B3907872136A71 at EXCH1.superinternet.net.sg>
> Content-Type: text/plain; charset="us-ascii"
>
> I tried the cacheless mode, it didn't work for me.
>
> I'm just wondering , how did those people out there do their OUTBOUND
> proxy ?
> Can anyone give me some hint ?
>
> Regards,
> Sam
>
> -----Original Message-----
> From: Klaus Darilion [mailto:klaus.mailinglists at pernau.at]
> Sent: Friday, May 26, 2006 4:57 PM
> To: Sam Lee
> Cc: users at openser.org
> Subject: Re: [Users] 2 Openser Instances
>
> Sam Lee wrote:
>> Hi Klaus,
>>
>> Thanks for the quick reply. My purpose is one of the instance being a
>> normal Openser, the other with a FORCE RTPproxy. This is so that if
>> they have a symmetric NAT going on in their network, they can make use
>
>> of this rtpproxy as an outbound proxy but still able to call those
>> register with the normal openser.
>>
>> Care to explain what is cacheless userloc mode ? How do I set it ?
>
> http://openser.org/docs/modules/devel/usrloc.html#AEN252
>
> it's mode 3 (only available in CVS head)
>>
>> Because of the normal and force RTPproxy , these 2 instances has
>> different routing patterns, and they are handled differently.
>
> I still would use only one proxy and apply NAT traversal only for
> clients which use the "NAT traversal" port on your openser.
>
> The idea is:
> ...
> if ( dst_port = 6060) { # needs NAT traversal
> if (is_method("REGISTER")) {
> setflag(9);
> # this is the natflag specified in userloc module #
> http://openser.org/docs/modules/1.0.x/registrar.html#AEN103
> fix_nated_register();
> } else {
> # do all the NAT traversal, activate RTP proxy
> }
> }
>
> # now do the normal call and REGISTER handling
>
> ...
>
>
>
>
>
> ...
> lookup("location");
> if(isflagset(9)) {
>    ...#force rtp proxy
> }
> ....
>
>
>
> regards
> klaus
>
>
>
>>
>> Any ideas ?
>>
>> Regards,
>> Sam
>>
>> -----Original Message-----
>> From: Klaus Darilion [mailto:klaus.mailinglists at pernau.at]
>> Sent: Friday, May 26, 2006 4:28 PM
>> To: Sam Lee
>> Cc: users at openser.org
>> Subject: Re: [Users] 2 Openser Instances
>>
>> 1. You can run several instances of openser on the same PC, but what
>> is your purpose?
>>
>> 2. If 2 openser proxies share the same userloc database, you have to
>> use the cacheless userloc mode
>>
>> 3. If you just want to listen on several ports, use a single proxy
>> with multiple listen directives
>>
>> listen=udp:1.2.3.4:5060
>> listen=udp:1.2.3.4:6060
>> listen=udp:1.2.3.4:7060
>>
>> regards
>> klaus
>>
>>
>> Sam Lee wrote:
>>> Have anyone tried running 2 separate instances on OpenSER (running on
>
>>> different ports) ?
>>> Both these instances are doing almost exactly the same thing, they
>>> take in REGISTER and save them into the locations database. They all
>>> do all the other processing like INVITE.
>>>
>>> Will this causes a problem in MYSQL ? I'm asking this because i got a
>
>>> very strange problem. I register 1 UA to each instances. When i did a
>
>>> ul show , it always only have either the UA from instance A or UA
>>> from
>>
>>> instance B . Note, these 2 UA have different numbers. Why can't it
>>> just save both into the MYSQL DB ?
>>>
>>> I would be glad to clarify any doubts. Please assist as far as you
>> can.
>>> Thanks!
>>>
>>> Regards,
>>> Sam
>>>
>>>
>>> ---------------------------------------------------------------------
>>> -
>>> --
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at openser.org
>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
> End of Users Digest, Vol 12, Issue 71
> *************************************
> 





More information about the Users mailing list