[Users] openser and authentication

buxalex at libero.it buxalex at libero.it
Wed Mar 15 11:24:36 CET 2006


Hello Bogdan,

I made some more tests, and I realized that:

After registering my softphone (Express Talk) with user and password correct, if I change the password with a wrong one,
the softphone registers anyway to openser. But if I shutdown 
the softphone and I restart it with a wrong password, the registration is refused (error 401). So I am wandering whether
it is a softphone problem or a bug into openser. I have this doubt, because changing the user with a non existent into db, softphone doesn't register to openser even avoiding to shutdown the softphone. What do you think?


Thanks for your support...
Alessandro


---------- Initial Header -----------

>From      : "Bogdan-Andrei Iancu" bogdan at voice-system.ro
To          : "buxalex at libero.it" buxalex at libero.it
Cc          : "users" users at openser.org
Date      : Wed, 15 Mar 2006 11:22:39 +0200
Subject : Re: [Users] openser and authentication







> Hi Alessandro,
> 
> do you see any challenge from openser as a response to the REGISTER 
> requests? have you try the debug mode to get more info about what is 
> going one?
> 
> regards,
> bogdan
> 
> buxalex at libero.it wrote:
> 
> >Hello,
> >I am new with openser, and I am trying to figure out how to setup the openser.cfg.
> >I've installed openser 1.1.0 with the db support. It works fine, infact I can register softphones and have calls. The softphones are correctly registered checking the username into Mysql db. I would like to check also the password, and maybe the phone number, so I tried to enter the following parameter:
> >
> >modparam("auth_db", "calculate_ha1", yes) 
> >modparam("auth_db", "password_column", "password") 
> >
> >but it doesn't work, infact the softphones are anyway registered (it checks only the username). Did I missed something in my configuration?
> >
> >Thnaks a lot
> >Alessandro
> >
> >PS. This is my openser.config (sorry for the long mail...):
> >
> ># ----------- global configuration parameters -- 
> >debug=3 # debug level (cmd line: -dddddddddd) 
> >fork=yes 
> >log_stderror=no # (cmd line: -E) 
> >check_via=no # (cmd. line: -v) 
> >dns=no # (cmd. line: -r) 
> >rev_dns=no # (cmd. line: -R) 
> >port=5060 
> >children=4 
> >fifo="/tmp/openser_fifo" 
> >
> ># ------------------ module loading 
> >loadmodule "/usr/local/lib/openser/modules/mysql.so" 
> >loadmodule "/usr/local/lib/openser/modules/sl.so" 
> >loadmodule "/usr/local/lib/openser/modules/tm.so" 
> >loadmodule "/usr/local/lib/openser/modules/rr.so" 
> >loadmodule "/usr/local/lib/openser/modules/maxfwd.so" 
> >loadmodule "/usr/local/lib/openser/modules/usrloc.so" 
> >loadmodule "/usr/local/lib/openser/modules/registrar.so" 
> >loadmodule "/usr/local/lib/openser/modules/textops.so" 
> >loadmodule "/usr/local/lib/openser/modules/alias_db.so" 
> >
> >loadmodule "/usr/local/lib/openser/modules/auth.so" 
> >loadmodule "/usr/local/lib/openser/modules/auth_db.so" 
> >
> ># ----------------- setting module-specific parameters - 
> >modparam("usrloc", "db_url", "mysql://openser:openser@localhost/openser") 
> >modparam("usrloc", "db_mode", 2) 
> >modparam("auth_db", "calculate_ha1", yes) 
> >modparam("auth_db", "password_column", "password") 
> >modparam("rr", "enable_full_lr", 1) 
> >......
> >if (method=="REGISTER") { 
> >if (!www_authorize("161.27.53.93", "subscriber")) { 
> >www_challenge("161.27.53.93", "0"); 
> >exit; 
> >}; 
> >save("location"); 
> >exit; 
> >}; 
> >lookup("aliases"); 
> >if (!uri==myself) { 
> >append_hf("P-hint: outbound alias\r\n"); 
> >route(1); 
> >};  
> >...... 
> >
> >
> >_______________________________________________
> >Users mailing list
> >Users at openser.org
> >http://openser.org/cgi-bin/mailman/listinfo/users
> >
> >  
> >
> 
> 





More information about the Users mailing list