[Users] awkward loose_route behaviour
Klaus Darilion
klaus.mailinglists at pernau.at
Tue Apr 25 09:21:59 CEST 2006
Hi Jean!
Does the bug happen only in stateless mode?
regards
klaus
Jean-Michel Foucher wrote:
> Hello all,
>
> i'm facing some problems with loose_route, may it be with ACK or BYE
> messages.
>
> Here is the situation :
>
> - 2 softphones : let's call them A and B (on different IP addresses :
> /A_ip /and/ B_ip/).
>
> A's username is "voip2".
>
> A registers on this platform :
>
> - a stateless SER on /stateless_ip/
>
> - a statefull SER on /statefull_ip/
>
> B registers on another platform that i do not know (see /Bplatform_ip/)
>
> When B calls A, INVITE messages are smoothly forwarded and relayed.
>
> Same case for trying, OK and 180 ringing.
>
> However, when B sends ACK after (INVITE, trying, OK), here is what ser
> stateless receives :
>
>
> ACK sip:voip2@/stateless_ip/ SIP/2.0
> Record-Route: <sip:voip2@/Bplatform_ip/;ftag=368e6f71;lr=on>
> Via: SIP/2.0/UDP /Bplatform_ip/;branch=0
> Via: SIP/2.0/UDP
> /B_ip/:64064;received=/B_public_ip/;branch=z9hG4bK-d87543-226b496c2343f701-1--d87543-;rport=2301
> Max-Forwards: 69
> Route: <sip:/stateless_ip/;lr=on> (****)
> Route: <sip:/statefull_ip/;ftag=368e6f71;lr=on> (****)
> Route: <sip:/stateless_ip/;lr=on>
>
>
> this message is loose_routed and then forwarded (loose_route();
> forward(uri:host, uri:port);)
>
> and then here is what ser stateless sends to ser statefull :
>
>
> ACK sip:/stateless_ip/;lr=on SIP/2.0
> Record-Route: <sip:voip2@/Bplatform_ip/;ftag=368e6f71;lr=on>
> Via: SIP/2.0/UDP /stateless_ip/;branch=0
> Via: SIP/2.0/UDP /Bplatform_ip/;branch=0
> Via: SIP/2.0/UDP
> /B_ip/:64064;received=/B_public_ip/;branch=z9hG4bK-d87543-226b496c2343f701-1--d87543-;rport=2301
> Max-Forwards: 16
> Route: <sip:/stateless_ip/;lr=on>
>
>
> Here are my parameters for ser stateless concerning rr module :
> modparam("rr", "enable_full_lr", 1)
> modparam("rr", "enable_double_rr", 0)
> modparam("rr","append_fromtag",0)
>
>
> Then, there are two things that i don't understand and make confusion to
> ser statefull:
>
> - why did (****) Routes disappear ?
>
> - why did ruri changed in ACK message sent to ser statefull?
>
> any help would be appreciated, thanks in advance,
>
> --
> Jean-Michel Foucher
> OpenWengo, the free and multiplatform VoIP client
> http://dev.openwengo.com/
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
More information about the Users
mailing list