Table of Contents
List of Tables
List of Examples
ldap_session parameter usagebase_dn parameter usagesearch_scope parameter usageThe OpenSIPS H350 module enables an OpenSIPS SIP proxy server to access SIP account data stored in an LDAP [RFC4510] directory containing H.350 [H.350] commObjects. ITU-T Recommendation H.350 standardizes LDAP object classes to store Real-Time Communication (RTC) account data. In particular, H.350.4 [H.350.4] defines an object class called sipIdentity that includes attribute specifications for SIP account data like SIP URI, SIP digest username/password, or service level. This allows to store SIP account data in a vendor neutral way and lets different entities, like SIP proxies, provisioning, or billing applications, access the data in a standardized format.
The ViDe H.350 Cookbook [vide-h.350-cb] is a good reference for deploying an H.350 directory. Besides general information on H.350, LDAP, and related standards, this document explains how to set up an H.350/LDAP directory and discusses different deployment scenarios.
The H350 module uses the OpenSIPS LDAP module to import H.350 attribute values into the OpenSIPS routing script variable space. The module exports functions to parse and store the H.350 attribute values from the OpenSIPS routing script. It allows a script writer to implement H.350 based SIP digest authentication, call forwarding, SIP URI alias to AOR rewriting, and service level parsing.
The following example shows a typical H.350 commObject LDAP entry storing SIP account data.
Example 1.1. Example H.350 commObject storing SIP account data
Attribute Name Attribute Value(s)
-------------- -----------------
# LDAP URI identifying the owner of this commObject, typically
# points to an entry in the enterprise directory
commOwner ldap://dir.example.com/dc=example,dc=com??one?(uid=bob)
# Unique identifier for this commObject, used for referencing
# this object e.g. from the enterprise directory
commUniqueId 298217asdjgj213
# Determines if this commObject should be listed on white pages
commPrivate false
# Valid SIP URIs for this account (can be used to store alias SIP URIs
# like DIDs as well)
SIPIdentitySIPURI sip:bob@example.com
sip:bob@alias.example.com
sip:+1919123456@alias.example.com
# SIP digest username
SIPIdentityUserName bob
# SIP digest password
SIPIdentityPassword pwd
# SIP proxy address
SIPIdentityProxyAddress sip.example.com
# SIP registrar address
SIPIdentityRegistrarAddress sip.example.com
# Call preferences: Forward to voicemail on no response
# after 20 seconds and on busy
callPreferenceURI sip:bob@voicemail.example.com n:20000
sip:bob@voicemail.example.com b
# Account service level(s)
SIPIdentityServiceLevel long_distance
conferencing
# H.350 object classes
objectClass top
commObject
SIPIdentity
callPreferenceURIObject
The module depends on the following modules (the listed modules must be loaded before this module):
LDAP
Name of the LDAP session to be used for H.350 queries, as defined in the LDAP module configuration file.
Default value: ""
Base LDAP DN to start LDAP search for H.350 entries. For best performance, this should be set to the direct ancestor of the H.350 objects.
Default value: ""
This function performs an LDAP search query for an H.350 commObject with a SIPIdentitySIPURI of sip_uri. The sip_uri parameter first gets escaped according the rules for LDAP filter strings. The result of the LDAP search is stored internally and can be accessed either by one of the h350_result* or one of the ldap_result* functions from the OpenSIPS LDAP module.
The function returns -1 (FALSE) for internal errors, and -2 (FALSE) if no H.350 commObject was found with a matching sip_uri. n > 0 (TRUE) is returned if n H.350 commObjects were found.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE and BRANCH_ROUTE.
Function Parameters:
H.350 SIPIdentitySIPURI to search for in directory.
Return Values:
n > 0 (TRUE):
n H.350 commObjects found.
-1 (FALSE):Internal error occurred.
-2 (FALSE):No H.350 commObject found.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.
Example 1.5. Example Usage
#
# H.350 lookup for callee
#
if (!h350_sipuri_lookup("sip:$rU@$rd"))
{
switch ($retcode)
{
case -2:
xlog("L_INFO",
"h350 callee lookup: no entry found in H.350 directory");
exit;
case -1:
sl_send_reply(500, "Internal server error");
exit;
}
}
# now h350_result* or ldap_result* functions can be used
This function performs an LDAP search query for SIP digest authentication credentials in an H.350 directory. The H.350 directory is searched for a commObject with SIPIdentityUserName of auth_username. If such a commObject is found, the SIP digest authentication username and password are stored in AVPs username_avp_spec and pwd_avp_spec, respectively. pv_*_authorize functions from AUTH module can then be used to perform SIP digest authentication.
The function returns 1 (TRUE) if an H.350 commObject was found, -1 (FALSE) in case of an internal error, and -2 (FALSE) if no matching commObject was found.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE and BRANCH_ROUTE.
Function Parameters:
H.350 SIPIdentityUserName to search for in directory.
Specification for authentication username AVP, e.g. $avp(username).
Specification for authentication password AVP, e.g. $avp(pwd).
Return Values:
1 (TRUE):
H.350 commObject found and SIP digest authentication credentials stored in username_avp_spec and pwd_avp_spec.
-1 (FALSE):Internal error occurred.
-2 (FALSE):No H.350 commObject found.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.
Example 1.6. Example Usage
# -- auth params --
modparam("auth", "username_spec", "$avp(auth_user)")
modparam("auth", "password_spec", "$avp(auth_pwd)")
modparam("auth", "calculate_ha1", 1)
# -- h350 params --
modparam("h350", "ldap_session", "h350")
modparam("h350", "base_dn", "ou=h350,dc=example,dc=com")
modparam("h350", "search_scope", "one")
route[1]
{
#
# H.350 based SIP digest authentication
#
# challenge all requests not including an Auth header
if (!(is_present_hf("Authorization") ||
is_present_hf("Proxy-Authorization")))
{
if (is_method("REGISTER"))
{
www_challenge("example.com", 0);
exit;
}
proxy_challenge("example.com", 0);
exit;
}
# get digest password from H.350 using auth username ($au)
if (!h350_auth_lookup($au,
"$avp(auth_user)/$avp(auth_pwd)"))
{
switch ($retcode)
{
case -2:
sl_send_reply(401, "Unauthorized");
exit;
case -1:
sl_send_reply(500, "Internal server error");
exit;
}
}
# REGISTER requests
if (is_method("REGISTER"))
{
if (!pv_www_authorize("example.com"))
{
if ($retcode == -5)
{
sl_send_reply(500, "Internal server error");
exit;
}
else {
www_challenge("example.com", 0);
exit;
}
}
consume_credentials();
xlog("L_INFO",
"REGISTER request successfully authenticated");
return(1);
}
# non-REGISTER requests
if (!pv_proxy_authorize("example.com"))
{
if ($retcode == -5)
{
sl_send_reply(500, "Internal server error");
exit;
}
else {
proxy_challenge("example.com", 0);
exit;
}
}
consume_credentials();
xlog("L_INFO", "$rm request successfully authenticated");
return(1);
}
This function parses the callPreferenceURI attribute of an H.350 commObject, which must have been fetched through h350_*_lookup or ldap_search. callPreferenceURI is a multi-valued attribute that stores call preference rules like e.g. forward-on-busy or forward-unconditionally. Directory services architecture for call forwarding and preferences [H.350.6] defines a format for simple call forwarding rules:
target_uri type[:argument]
In a SIP environment, target_uri is typically the call forwarding rule's target SIP URI, although it could be any type of URI, e.g. an HTTP pointer to a CPL script. Four different values are specified for type: b for "forward on busy", n for "forward on no answer", u for "forward unconditionally", and f for "forward on destination not found". The optional argument is a string indicating the time in milliseconds after which the call forwarding should occur.
Example 1.7. Example H.350 callPreferenceURI simple call forwarding rules
# Example 1:
# forward to sip:voicemail@example.com on no answer after 15 seconds:
callPreferenceURI: sip:voicemail@example.com n:15000
# Example 2:
# unconditionally forward to sip:alice@example.com:
callPreferenceURI: sip:alice@example.com u
# Example 3:
# forward to sip:bob@example.com and sip:alice@example.com
# (forking) on destination not found:
callPreferenceURI: sip:bob@example.com f
callPreferenceURI: sip:alice@example.com f
h350_result_call_preferences stores these call forwarding rules as AVPs according to the following rules:
#
# AVP storing a forwarding rule's target URI
#
AVP name = avp_name_prefix + '_' + type
AVP value = target_uri
#
# AVP storing a forwarding rule's argument
#
AVP name = avp_name_prefix + '_' + type + '_t'
AVP value = argument / 1000
Example 1 from above would result in two AVPs: $avp("prefix_n") = "sip:voicemail@example.com" and $avp("prefix_n_t") = 15.
Example 2: $avp("prefix_u") = "sip:alice@example.com".
Example 3: $avp("prefix_f[1]") = "sip:bob@example.com" and $avp("prefix_f[2]]") = "sip:alice@example.com".
These AVPs can then be used to implement the desired behavior in the OpenSIPS routing script.
This function returns the number of successfully parsed simple call forwarding rules (TRUE), in case the H.350 callPreferenceURI attribute contained one or multiple values matching the simple call forwarding rule syntax described above. It returns -1 (FALSE) for internal errors, and -2 (FALSE) if none of the rules matched or if no callPreferenceURI attribute was found.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE and BRANCH_ROUTE.
Function Parameters:
Name prefix for call forwarding rule AVPs, as described above.
Return Values:
n > 0 (TRUE):
n simple call forwarding rules found.
-1 (FALSE):Internal error occurred.
-2 (FALSE):No simple call forwarding rule found, or callPreferenceURI not present.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.
Example 1.8. Example Usage
#
# H.350 lookup for callee
#
... h350_sipuri_lookup("sip:$rU@$rd") ...
#
# store H.350 call preferences in AVP
#
if (!h350_result_call_preferences("callee_pref_") && ($retcode == -1))
{
sl_send_reply(500, "Internal server error");
exit;
}
# $avp(callee_pref_u) == CFU URI(s)
# $avp(callee_pref_n) == CFNR URI(s)
# $avp(callee_pref_n_t) == CFNR timeout in seconds
# $avp(callee_pref_b) == CFB URI(s)
# $avp(callee_pref_f) == CFOFFLINE URI(s)
#
# Example for forward-unconditionally (CFU)
#
if (is_avp_set("$avp(callee_pref_u)"))
{
# replace R-URI with CFU URI, g will fetch all CFU URIs
# --> request can fork
if (avp_pushto("$ru", "$avp(callee_pref_u)/g"))
{
avp_delete("$avp(callee_pref_u)");
} else
{
sl_send_reply(500, "Internal server error");
exit;
}
sl_send_reply(181, "Call is being forwarded");
t_relay();
exit;
}
Directory services architecture for SIP [H.350.4] defines a multi-valued LDAP attribute named SIPIdentityServiceLevel, which can be used to store SIP account service level values in an LDAP directory. This function parses the SIPIdentityServiceLevel attribute and stores all service level values as AVPs for later retrieval in the OpenSIPS routing script. The function accesses the H.350 commObject fetched by a call to h350_*_lookup or ldap_search.
The resulting AVPs have a name of the form avp_name_prefix + SIPIdentityServiceLevel attribute value, and an integer value of 1.
Example 1.9. Example SIPIdentityServiceLevel values and resulting AVPs
SIPIdentityServiceLevel: longdistance
SIPIdentityServiceLevel: international
SIPIdentityServiceLevel: 900
after calling h350_result_service_level("sl_"), the following AVPs
will be available in the routing script:
$avp("sl_longdistance") = 1
$avp("sl_international") = 1
$avp("sl_900") = 1
This function returns the number of added AVPs (TRUE), -1 (FALSE)for internal errors, and -2 (FALSE)if no SIPIdentityServiceLevel attribute was found.
The function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE and BRANCH_ROUTE.
Function Parameters:
Name prefix for service level AVPs, as described above.
Return Values:
n > 0 (TRUE):
n AVPs added.
-1 (FALSE):Internal error occurred.
-2 (FALSE):No SIPIdentityServiceLevel attribute found.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE, and ONREPLY_ROUTE.
Example 1.10. Example Usage
#
# H.350 SIP digest authentication for caller
#
... h350_auth_lookup("$au", ...) ...
#
# store caller's service level as AVP
#
if (!h350_result_service_level("caller_sl_") && ($retcode == -1))
{
sl_send_reply(500, "Internal server error");
exit;
}
#
# make routing decision based on service level AVPs
#
if (is_avp_set("$avp(caller_sl_international)"))
{
t_relay();
}
else {
sl_send_reply(403, "Forbidden");
}
exit;
[H.350] Directory Services Architecture for Multimedia Conferencing. August 2003. ITU-T.
[H.350.4] Directory services architecture for SIP. August 2003. ITU-T.
[H.350.6] Directory services architecture for call forwarding and preferences. March 2004. ITU-T.
[ViDe-H.350-Cookbook] ViDe H.350 Cookbook. 2005. ViDe.
[RFC4510] Lightweight Directory Access Protocol (LDAP): Technical Specification Road Map. June 2006. Internet Engineering Task Force.
Table 2.1. Top contributors by DevScore(1), authored commits(2) and lines added/removed(3)
| Name | DevScore | Commits | Lines ++ | Lines -- | |
|---|---|---|---|---|---|
| 1. | Christian Schlatter | 21 | 3 | 1993 | 1 |
| 2. | Bogdan-Andrei Iancu (@bogdan-iancu) | 15 | 13 | 52 | 50 |
| 3. | Daniel-Constantin Mierla (@miconda) | 12 | 9 | 79 | 83 |
| 4. | Liviu Chircu (@liviuchircu) | 11 | 9 | 25 | 39 |
| 5. | Vlad Patrascu (@rvlad-patrascu) | 9 | 3 | 80 | 247 |
| 6. | Razvan Crainea (@razvancrainea) | 8 | 6 | 51 | 59 |
| 7. | Maksym Sobolyev (@sobomax) | 4 | 2 | 3 | 4 |
| 8. | Konstantin Bokarius | 3 | 1 | 1 | 4 |
| 9. | Peter Lemenkov (@lemenkov) | 3 | 1 | 1 | 1 |
| 10. | Edson Gellert Schubert | 3 | 1 | 0 | 85 |
(1) DevScore = author_commits + author_lines_added / (project_lines_added / project_commits) + author_lines_deleted / (project_lines_deleted / project_commits)
(2) including any documentation-related commits, excluding merge commits. Regarding imported patches/code, we do our best to count the work on behalf of the proper owner, as per the "fix_authors" and "mod_renames" arrays in opensips/doc/build-contrib.sh. If you identify any patches/commits which do not get properly attributed to you, please submit a pull request which extends "fix_authors" and/or "mod_renames".
(3) ignoring whitespace edits, renamed files and auto-generated files
Table 2.2. Most recently active contributors(1) to this module
| Name | Commit Activity | |
|---|---|---|
| 1. | Liviu Chircu (@liviuchircu) | Mar 2014 - May 2024 |
| 2. | Maksym Sobolyev (@sobomax) | Feb 2023 - Feb 2023 |
| 3. | Razvan Crainea (@razvancrainea) | Jun 2011 - Jul 2020 |
| 4. | Bogdan-Andrei Iancu (@bogdan-iancu) | Jan 2008 - Mar 2020 |
| 5. | Vlad Patrascu (@rvlad-patrascu) | May 2017 - Apr 2019 |
| 6. | Peter Lemenkov (@lemenkov) | Jun 2018 - Jun 2018 |
| 7. | Daniel-Constantin Mierla (@miconda) | Sep 2007 - Mar 2008 |
| 8. | Konstantin Bokarius | Mar 2008 - Mar 2008 |
| 9. | Edson Gellert Schubert | Feb 2008 - Feb 2008 |
| 10. | Christian Schlatter | Aug 2007 - Dec 2007 |
(1) including any documentation-related commits, excluding merge commits
Last edited by: Vlad Patrascu (@rvlad-patrascu), Peter Lemenkov (@lemenkov), Liviu Chircu (@liviuchircu), Razvan Crainea (@razvancrainea), Bogdan-Andrei Iancu (@bogdan-iancu), Daniel-Constantin Mierla (@miconda), Konstantin Bokarius, Edson Gellert Schubert, Christian Schlatter.
Documentation Copyrights:
Copyright © 2007 University of North Carolina