Table of Contents
List of Tables
List of Examples
RabbitMQ (http://www.rabbitmq.com/) is an open source messaging server. It's purpose is to manage received messages in queues, taking advantage of the flexible AMQP protocol.
This module provides the implementation of a RabbitMQ client for the Event Interface. It is used to send AMQP messages to a RabbitMQ server each time the Event Interface triggers an event subscribed for.
The AMQP protocol is only used as the transport layer for notifications. The content of a message is presented in the next section.
The event payload is formated as a JSON-RPC notification, with the event name as the method field and the event parameters as the params field.
'rabbitmq:' [user[':'password] '@' host [':' port] '/' [params '?'] routing_key
Meanings:
'rabbitmq:' - informs the Event Interface that the events sent to this subscriber should be handled by the event_rabbitmq module.
user - username used for RabbitMQ server authentication. The default value is 'guest'.
password - password used for RabbitMQ server authentication. The default value is 'guest'.
host - host name of the RabbitMQ server.
port - port of the RabbitMQ server. The default value is '5672'.
params - extra parameters specified as key[=value], separated by ';':
exchange - exchange of the RabbitMQ server. The default value is ''.
tls_domain - indicates which TLS domain (as defined using the tls_mgm module) to use for this connection. The use_tls module parameter must be enabled.
persistent - indicates that the message should be published as persistent delivery_mode=2. This parameter does not have a value.
routing_key - this is the routing key used by the AMQP protocol and it is used to identify the queue where the event should be sent.
NOTE: if the queue does not exist, this module will not try to create it.
Enables heartbeat support for the AMQP communication. If the client does not receive a heartbeat from server within the specified interval, the socket is automatically closed by the rabbitmq-client. This prevents OpenSIPS from blocking while waiting for a response from a dead rabbitmq-server. The value represents the heartbit interval in seconds.
Default value is “0 (disabled)”.
The maximally allowed duration (in milliseconds) for the establishment of a TCP connection with a RabbitMQ server.
Default value is “500” (milliseconds).
Example 1.2. Setting the connect_timeout
parameter
... modparam("event_rabbitmq", "connect_timeout", 1000) ...
Setting this parameter will allow you to use TLS for broker connections. In order to enable TLS for a specific connection, you can use the "tls_domain=dom_name" parameter in the configuration specified through the RabbitMQ socket syntax.
When using this parameter, you must also ensure that tls_mgm is loaded and properly configured. Refer to the the module for additional info regarding TLS client domains.
Default value is 0 (not enabled)
Example 1.3. Set the use_tls
parameter
... modparam("tls_mgm", "client_domain", "rmq") modparam("tls_mgm", "certificate", "[rmq]/etc/pki/tls/certs/rmq.pem") modparam("tls_mgm", "private_key", "[rmq]/etc/pki/tls/private/rmq.key") modparam("tls_mgm", "ca_list", "[rmq]/etc/pki/tls/certs/ca.pem") ... modparam("event_rabbitmq", "use_tls", 1) ...
This is an example of an event raised by the pike module when it decides an ip should be blocked:
Example 1.4. E_PIKE_BLOCKED event
{ "jsonrpc": "2.0", "method": "E_PIKE_BLOCKED", "params": { "ip": "192.168.2.11" } }
Example 1.5. RabbitMQ socket
rabbitmq:guest:guest@127.0.0.1:5672/pike # same socket can be written as rabbitmq:127.0.0.1/pike # TLS broker connection rabbitmq:127.0.0.1/tls_domain=rmq?pike
This configuration file presents the usage of the event_rabbitmq module. In this scenario, a message is sent to a RabbitMQ server everytime OpenSIPS receives a MESSAGE request. The parameters passed to the server are the R-URI username and the message body.
Example 1.6. OpenSIPS config script - sample event_rabbitmq usage
... loadmodule "signaling.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "uri.so" loadmodule "acc.so" loadmodule "event_rabbitmq.so" startup_route { if (!subscribe_event("E_SIP_MESSAGE", "rabbitmq:127.0.0.1/sipmsg")) { xlog("L_ERR","cannot the RabbitMQ server to the E_SIP_MESSAGE event\n"); } } route{ if (!mf_process_maxfwd_header(10)) { sl_send_reply(483,"Too Many Hops"); exit; } if (has_totag()) { if (loose_route()) { if (is_method("INVITE")) { record_route(); } route(1); } else { if ( is_method("ACK") ) { if ( t_check_trans() ) { t_relay(); exit; } else { exit; } } sl_send_reply(404,"Not here"); } exit; } if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); if (loose_route()) { xlog("L_ERR", "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]"); if (!is_method("ACK")) sl_send_reply(403,"Preload Route denied"); exit; } if (!is_method("REGISTER|MESSAGE")) record_route(); if (!is_myself("$rd")) { append_hf("P-hint: outbound\r\n"); route(1); } if (is_method("PUBLISH")) { sl_send_reply(503, "Service Unavailable"); exit; } if (is_method("REGISTER")) { if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { sl_send_reply(484,"Address Incomplete"); exit; } if (is_method("MESSAGE")) { $avp(attrs) = "user"; $avp(vals) = $rU; $avp(attrs) = "msg"; $avp(vals) = $rb; if (!raise_event("E_SIP_MESSAGE", $avp(attrs), $avp(vals))) xlog("L_ERR", "cannot raise E_SIP_MESSAGE event\n"); } if (!lookup("location", "method-filtering")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply(404, "Not Found"); exit; case -2: sl_send_reply(405, "Method Not Allowed"); exit; } } route(1); } route[1] { if (is_method("INVITE")) { t_on_failure("1"); } if (!t_relay()) { sl_reply_error(); }; exit; } failure_route[1] { if (t_was_cancelled()) { exit; } } ...
2.1. | What is the maximum lenght of a AMQP message? |
The maximum length of a datagram event is 16384 bytes. | |
2.2. | Where can I find more about OpenSIPS? |
Take a look at https://opensips.org/. | |
2.3. | What is the vhost used by the AMQP server? |
Currently, the only vhost supported is '/'. | |
2.4. | How can I set a vhost in the socket? |
This version doesn't support a different vhost. | |
2.5. | How can I send an event to my RabbitMQ server? |
This module acts as a transport module for the OpenSIPS Event Interface. Therefore, this module should follow the Event Interface behavior: The first step is to subscribe the RabbitMQ server to the OpenSIPS Event Interface. This can be done using the subscribe_event core function: Example 2.1. Event subscription startup_route { subscribe_event("E_RABBITMQ_EVENT", "rabbitmq:127.0.0.1/queue"); } The next step is to raise the event from the script, using the raise_event core function: Example 2.2. Event subscription route { ... /* decided that an event should be raised */ raise_event("E_RABBITMQ_EVENT"); ... } NOTE that the event used above is only to exemplify the usage from the script. Any event published through the OpenSIPS Event Interface can be raised using this module. | |
2.6. | Where can I find more information about RabbitMQ? |
You can find more information about RabbitMQ on their official website ( http://www.rabbitmq.com/). | |
2.7. | Where can I post a question about this module? |
First at all check if your question was already answered on one of our mailing lists:
E-mails regarding any stable OpenSIPS release should be sent to
If you want to keep the mail private, send it to
| |
2.8. | How can I report a bug? |
Please follow the guidelines provided at: https://github.com/OpenSIPS/opensips/issues. |
Table 3.1. Top contributors by DevScore(1), authored commits(2) and lines added/removed(3)
Name | DevScore | Commits | Lines ++ | Lines -- | |
---|---|---|---|---|---|
1. | Razvan Crainea (@razvancrainea) | 60 | 38 | 1943 | 310 |
2. | Vlad Patrascu (@rvlad-patrascu) | 22 | 12 | 504 | 266 |
3. | Liviu Chircu (@liviuchircu) | 9 | 7 | 23 | 40 |
4. | Ovidiu Sas (@ovidiusas) | 5 | 3 | 35 | 7 |
5. | Bogdan-Andrei Iancu (@bogdan-iancu) | 5 | 3 | 8 | 9 |
6. | Maksym Sobolyev (@sobomax) | 5 | 3 | 7 | 7 |
7. | Peter Lemenkov (@lemenkov) | 5 | 3 | 2 | 3 |
8. | Ionut Ionita (@ionutrazvanionita) | 4 | 2 | 52 | 25 |
9. | franklyfox | 4 | 2 | 44 | 5 |
10. | Jarrod Baumann (@jarrodb) | 4 | 2 | 2 | 2 |
All remaining contributors: Eric Tamme (@etamme), Julián Moreno Patiño, Vlad Paiu (@vladpaiu).
(1) DevScore = author_commits + author_lines_added / (project_lines_added / project_commits) + author_lines_deleted / (project_lines_deleted / project_commits)
(2) including any documentation-related commits, excluding merge commits. Regarding imported patches/code, we do our best to count the work on behalf of the proper owner, as per the "fix_authors" and "mod_renames" arrays in opensips/doc/build-contrib.sh. If you identify any patches/commits which do not get properly attributed to you, please submit a pull request which extends "fix_authors" and/or "mod_renames".
(3) ignoring whitespace edits, renamed files and auto-generated files
Table 3.2. Most recently active contributors(1) to this module
Name | Commit Activity | |
---|---|---|
1. | Vlad Patrascu (@rvlad-patrascu) | Jul 2015 - Jun 2023 |
2. | Liviu Chircu (@liviuchircu) | Mar 2014 - May 2023 |
3. | Maksym Sobolyev (@sobomax) | Feb 2023 - Feb 2023 |
4. | Razvan Crainea (@razvancrainea) | Sep 2011 - May 2021 |
5. | Peter Lemenkov (@lemenkov) | Jun 2018 - Aug 2020 |
6. | Bogdan-Andrei Iancu (@bogdan-iancu) | Oct 2014 - Apr 2019 |
7. | Jarrod Baumann (@jarrodb) | Apr 2015 - Mar 2016 |
8. | Julián Moreno Patiño | Feb 2016 - Feb 2016 |
9. | Ovidiu Sas (@ovidiusas) | Jun 2015 - Jun 2015 |
10. | Eric Tamme (@etamme) | May 2015 - May 2015 |
All remaining contributors: Ionut Ionita (@ionutrazvanionita), Vlad Paiu (@vladpaiu), franklyfox.
(1) including any documentation-related commits, excluding merge commits
Last edited by: Liviu Chircu (@liviuchircu), Razvan Crainea (@razvancrainea), Vlad Patrascu (@rvlad-patrascu), Peter Lemenkov (@lemenkov), Ionut Ionita (@ionutrazvanionita).
Documentation Copyrights:
Copyright © 2011 www.opensips-solutions.com