Flatstore Module

List of Tables

3.1. Top contributors by DevScore⁽¹⁾, authored commits⁽²⁾ and lines added/removed⁽³⁾
3.2. Most recently active contributors⁽¹⁾ to this module

List of Examples

1.1. Set “flush” parameter
1.2. Set “delimiter” parameter
1.3. Set “suffix” parameter
1.4. Set “prefix” parameter
1.5. Set “single_file” parameter

Chapter 1. Admin Guide

1.1. Overview

Flatstore is one of so-called OpenSIPS database modules. It does not export any functions executable from the configuration scripts, but it exports a subset of functions from the database API and thus other module can use it instead of, for example, mysql module.

The module does not export all functions of the database API, it supports only one function, insert. The module is limited but very fast. It is especially suitable for storing accounting information on sites with extremely high traffic. If MySQL is too slow or if you get a huge amount of accounting data then you can consider using this module. Note that the acc module is the only module that was tested with flastore.

The format of the files produced by this module is plain text. Each line consists of several fields, fields are separated by default by the | character. New information is always appended at the end of the file, searching, deleting and updating of existing data is not supported by the module.

The acc module can be configured to use flatstore module as database backend using the db_url_parameter:

modparam("acc", "db_url", "flatstore:/var/log/acc")

This configuration options tells acc module that it should use the flatstore module and the flatstore module should create all files in /var/log/acc directory. The directory must exist and OpenSIPS processes must have permissions to create files in that directory.

Name of files in that directory will follow the following pattern:

<prefix><table_name>[_<process_name>]<suffix>

For example, without setting any module parameter, the entries writen by OpenSIPS process 8 into acc table would be written in file acc_8.log. For each table there will be several files, one file for every OpenSIPS process that wrote some data into that table. The main reason why there are several files for each table is that it is much faster to have one file per process, because it does not require any locking and thus OpenSIPS processes will not block each other. To get the complete data for a table you can simply concatenate the contents of files with the same table name but different process id. Alternatively, you can use the single_file parameter, and all processes will dump the data into the same file. Note that this will induce some latency.

1.1.1. Rotating Log Files

There is a new OpenSIPS MI (management interface) command called flat_rotate. When OpenSIPS receives the command then it will close and reopen all files used by flatstore module. The rotation itself has to be done by another application (such as logrotate). Follow these steps to rotate files generated by flatstore module:

Rename the files that you want to rotate:
```
cd /var/log/acc
mv acc_1.log acc_1.log.20050605
mv acc_2.log acc_2.log.20050605
mv acc_4.log acc_3.log.20050605
...
			
```
Note that at this point OpenSIPS will still be writing all data into the renamed files.
Send OpenSIPS the MI command to close and reopen the renamed files. For example, using FIFO:
```
opensips-cli -x mi flat_rotate
			
```
This will force OpenSIPS to close the renamed files and open new ones with original names, such as acc_1.log. New files will be open at the point when OpenSIPS has some data to write. It is normal that the files will be not created immediately if there is no traffic on the proxy server.
Note that the suffix and prefix parameters are re-evaluated each time the flat_rotate command is issued. Therefore, after a rotate command, it is possible to open a different file than previous one.
Move the renamed files somewhere else and process them.

1.2. Dependencies

1.2.1. OpenSIPS Modules

The following modules must be loaded before this module:

No dependencies on other OpenSIPS modules.

1.2.2. External Libraries or Applications

The following libraries or applications must be installed before running OpenSIPS with this module loaded:

None.

1.3. Exported Parameters

1.3.1. `flush` (integer)

Enable or disable flushing after each write.

Default value is 1.

Example 1.1. Set “flush” parameter

...
modparam("db_flatstore", "flush", 0)
...

1.3.2. `delimiter` (char)

Delimiter used to separate the values.

Default value is '|'.

Example 1.2. Set “delimiter” parameter

...
modparam("db_flatstore", "delimiter", ";")
...

1.3.3. `suffix` (string)

The suffix appended to the table name. Can be a pseudo variable.

Default value is ".log".

Example 1.3. Set “suffix” parameter

...
modparam("db_flatstore", "suffix", "$time(%H)")
...

1.3.4. `prefix` (string)

The table name prefix. Can be a pseudo variable.

Defaul value is none.

Example 1.4. Set “prefix” parameter

...
modparam("db_flatstore", "prefix", "$time(%H)")
...

1.3.5. `single_file` (integer)

Specifies if all the processes should dump the data into a single file.

Default value is 0.

Example 1.5. Set “single_file” parameter

...
modparam("db_flatstore", "single_file", 1)
...

1.4. Exported Functions

There are no function exported to routing script.

1.5. Exported MI Functions

1.5.1. `flat_rotate`

It changes the name of the files where it is written.

Name: flat_rotate

Parameters: none

MI FIFO Command Format:

		opensips-cli -x mi flat_rotate

Chapter 2. Developer Guide

The module implements the DB API.

Chapter 3. Contributors

3.1. By Commit Statistics

Table 3.1. Top contributors by DevScore⁽¹⁾, authored commits⁽²⁾ and lines added/removed⁽³⁾

	Name	DevScore	Commits	Lines ++	Lines --
1.	Bogdan-Andrei Iancu (@bogdan-iancu)	35	26	557	230
2.	Razvan Crainea (@razvancrainea)	16	10	481	99
3.	Jan Janak (@janakj)	16	4	1232	20
4.	Liviu Chircu (@liviuchircu)	15	12	84	94
5.	Daniel-Constantin Mierla (@miconda)	12	10	60	40
6.	Vlad Patrascu (@rvlad-patrascu)	6	4	34	41
7.	Henning Westerholt (@henningw)	6	4	24	35
8.	Elena-Ramona Modroiu	4	2	23	1
9.	Maksym Sobolyev (@sobomax)	4	2	4	3
10.	Andrei Pelinescu-Onciul	3	1	29	3

All remaining contributors: Konstantin Bokarius, Razvan Pistolea, Peter Lemenkov (@lemenkov), Edson Gellert Schubert.

(1) DevScore = author_commits + author_lines_added / (project_lines_added / project_commits) + author_lines_deleted / (project_lines_deleted / project_commits)

(2) including any documentation-related commits, excluding merge commits. Regarding imported patches/code, we do our best to count the work on behalf of the proper owner, as per the "fix_authors" and "mod_renames" arrays in opensips/doc/build-contrib.sh. If you identify any patches/commits which do not get properly attributed to you, please submit a pull request which extends "fix_authors" and/or "mod_renames".

(3) ignoring whitespace edits, renamed files and auto-generated files

3.2. By Commit Activity

Table 3.2. Most recently active contributors⁽¹⁾ to this module

	Name	Commit Activity
1.	Liviu Chircu (@liviuchircu)	Mar 2014 - May 2024
2.	Maksym Sobolyev (@sobomax)	Feb 2017 - Feb 2023
3.	Razvan Crainea (@razvancrainea)	Sep 2011 - Sep 2019
4.	Bogdan-Andrei Iancu (@bogdan-iancu)	Oct 2005 - Apr 2019
5.	Vlad Patrascu (@rvlad-patrascu)	May 2017 - Apr 2019
6.	Peter Lemenkov (@lemenkov)	Jun 2018 - Jun 2018
7.	Razvan Pistolea	Jul 2009 - Jul 2009
8.	Daniel-Constantin Mierla (@miconda)	Nov 2006 - Mar 2008
9.	Konstantin Bokarius	Mar 2008 - Mar 2008
10.	Edson Gellert Schubert	Feb 2008 - Feb 2008

All remaining contributors: Henning Westerholt (@henningw), Elena-Ramona Modroiu, Andrei Pelinescu-Onciul, Jan Janak (@janakj).

(1) including any documentation-related commits, excluding merge commits

Chapter 4. Documentation

4.1. Contributors

Last edited by: Razvan Crainea (@razvancrainea), Peter Lemenkov (@lemenkov), Liviu Chircu (@liviuchircu), Vlad Patrascu (@rvlad-patrascu), Bogdan-Andrei Iancu (@bogdan-iancu), Daniel-Constantin Mierla (@miconda), Konstantin Bokarius, Edson Gellert Schubert, Henning Westerholt (@henningw), Elena-Ramona Modroiu.