Table of Contents
append_to_reply(txt)
append_hf(txt[, hdr_anchor])
insert_hf(txt)
insert_hf(txt, hdr)
append_urihf(prefix, suffix)
is_present_hf(hf_name)
append_time()
is_method(name)
remove_hf(hname)
remove_hf_re(hname_expr)
remove_hf_glob(hname_pattern)
has_totag()
ruri_has_param(param[,value])
ruri_add_param(param)
ruri_del_param(param)
ruri_tel2sip()
is_uri_user_e164(uri)
has_body_part([mime])
is_audio_on_hold()
is_privacy(privacy_type)
remove_body_part([mime[, revert]])
add_body_part(body, mime[, headers])
sipmsg_validate([flags[, result_pvar]])
codec_exists (name[, clock])
codec_delete(name[, clock])
codec_move_up(name[, clock])
codec_move_down(name[, clock])
codec_exists_re ( regexp )
codec_delete_re ( regexp )
codec_delete_except_re ( regexp )
codec_move_up_re ( regexp )
codec_move_down_re ( regexp )
change_reply_status(code, reason)
stream_exists(regexp)
stream_delete(regexp)
list_hdr_has_option(hdr_name, option)
list_hdr_add_option(hdr_name, option)
list_hdr_remove_option(hdr_name, option)
List of Tables
List of Examples
append_to_reply usageappend_hf usageinsert_hf usageinsert_hf usageappend_urihf usageis_present_hf usageappend_time usageis_method usageremove_hf usageremove_hf_re usageremove_hf_glob usagehas_totag usageruri_has_param usageruri_add_param usageruri_del_param usageruri_tel2sip usageis_uri_user_e164 usagehas_body_part usageis_audio_on_hold usageis_privacy usageremove_body_part() usageadd_body_part usagesipmsg_validate usagecodec_exists usagecodec_delete usagecodec_move_up usagecodec_move_down usagecodec_move_down usagecodec_exists_re usagecodec_delete_re usagecodec_delete_except_re usagecodec_move_up_re usagecodec_move_down_re usagecodec_move_down usagechange_reply_status usagestream_exists usagestream_delete usagelist_hdr_has_option usagelist_hdr_add_option usagelist_hdr_remove_option usageThe module implements SIP based operations over the messages processed by OpenSIPS. SIP is a text based protocol and the module provides a large set of very useful functions to manipulate the message at SIP level, e.g., inserting new headers or deleting them, check for method type, etc.
The following modules must be loaded before this module:
No dependencies on other OpenSIPS modules.
Append 'txt' as header to all replies that will be generated by OpenSIPS for this request.
Meaning of the parameters is as follows:
txt (string) - SIP header field, value and CRLF marker.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and ERROR_ROUTE.
Example 1.1. append_to_reply usage
...
append_to_reply("Foo: bar\r\n");
append_to_reply("Foo: $rm at $Ts\r\n");
...
Appends 'txt' as header after the last header field. If 'hdr_anchor' is given, 'txt' will be appended after the first occurrence of 'hdr_anchor' instead.
Meaning of the parameters is as follows:
txt (string) - Header field to be appended.
hdr_anchor (string, optional) - Header name after which the 'txt' is appended.
Note: Headers which are added in main route cannot be removed in further routes (e.g. failure routes). So, the idea is not to add there any headers that you might want to remove later. To add headers temporarily, use the branch route because the changes you do there are per-branch.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.2. append_hf usage
...
append_hf("P-hint: VOICEMAIL\r\n");
append_hf("From-username: $fU\r\n");
append_hf("From-username: $fU\r\n", "Call-ID");
...
Inserts 'txt' as header before the first header field.
Meaning of the parameters is as follows:
txt (string) - Header field to be inserted.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.3. insert_hf usage
...
insert_hf("P-hint: VOICEMAIL\r\n");
insert_hf("To-username: $tU\r\n");
...
Inserts 'txt' as header before first 'hdr' header field.
Meaning of the parameters is as follows:
txt (string) - Header field to be inserted.
hdr (string, optional) - Header name before which the 'txt' is inserted.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.4. insert_hf usage
...
insert_hf("P-hint: VOICEMAIL\r\n", "Call-ID");
insert_hf("To-username: $tU\r\n", "Call-ID");
...
Append header field name with original Request-URI in middle.
Meaning of the parameters is as follows:
prefix - string (usually at least header field name).
suffix - string (usually at least line terminator).
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE and BRANCH_ROUTE.
Return true if a header field is present in message.
The function is also able to distinguish the compact names. For exmaple “From” will match with “f”
Meaning of the parameters is as follows:
hf_name (string) - Header field name (long or compact form).
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Adds a time header to the reply of the request. You must use it before functions that are likely to send a reply, e.g., save() from 'registrar' module. Header format is: “Date: %a, %d %b %Y %H:%M:%S GMT”, with the legend:
%a abbreviated week of day name (locale)
%d day of month as decimal number
%b abbreviated month name (locale)
%Y year with century
%H hour
%M minutes
%S seconds
Return true if a header was successfully appended.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Check if the method of the message matches the name. If name is a known method (invite, cancel, ack, bye, options, info, update, register, message, subscribe, notify, refer, prack), the function performs method ID testing (integer comparison) instead of ignore case string comparison.
The 'name' can be a list of methods in the form of 'method1|method2|...'. In this case, the function returns true if the SIP message's method is one from the list. IMPORTANT NOTE: in the list must be only methods defined in OpenSIPS with ID (invite, cancel, ack, bye, options, info, update, register, message, subscribe, notify, refer, prack, publish; for more see: https://www.iana.org/assignments/sip-parameters).
If used for replies, the function tests the value of method field from CSeq header.
Meaning of the parameters is as follows:
name (string) - SIP method name
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.8. is_method usage
...
if(is_method("INVITE"))
{
# process INVITEs here
}
if(is_method("OPTION|UPDATE"))
{
# process OPTIONs and UPDATEs here
}
...
Remove from message all headers with name “hname”
Returns true if at least one header is found and removed.
Meaning of the parameters is as follows:
hname (string) - header name to be removed.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Remove from message all headers matching the “hname_expr” POSIX regular expression.
Returns true if at least one header is found and removed.
Meaning of the parameters is as follows:
hname_expr (string) - regular expression.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Remove from message all headers matching the “hname_pattern” glob pattern.
Returns true if at least one header is found and removed.
Meaning of the parameters is as follows:
hname_pattern (string) - glob pattern
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.11. remove_hf_glob usage
...
# removes X-Billing-Account, X-Billing-Price, X-Billing-rateplan, etc
remove_hf_glob("X-Billing*");
...
Check if To header field uri contains tag parameter.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Find if Request URI has a given parameter. If no value is given, the function will look for the paramter with no value, oherwise it will search for the parameter with the matching value.
Meaning of the parameters is as follows:
param (string) - parameter name to look for.
value (string, optional) - parameter value to match.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Add to RURI an URI parameter formated as "name=value".
Meaning of the parameters is as follows:
param (string) - parameter to be appended in “name=value” format.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Delete a parameter, its value and any leading ";" from the Request-URI of the current SIP message.
Meaning of the parameters is as follows:
param (string) - the parameter to be removed
Returns 1 on a successful deletion or -1 otherwise.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Converts RURI, if it is tel URI, to SIP URI. Returns true, only if conversion succeeded or if no conversion was needed (like RURI was not tel URI.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Checks if the username part of the given URI is an E164 number.
Meaning of the parameters is as follows:
uri (string) - a SIP URI
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE and LOCAL_ROUTE.
Example 1.17. is_uri_user_e164 usage
...
if (is_uri_user_e164($fu)) { # Check From header URI user part
...
}
if (is_uri_user_e164($avp(uri)) {
# Check user part of URI stored in avp uri
...
};
...
The function returns true if the SIP message has any body part with the given MIME. If there is no MIME given, it will return true if at least one body part is found (with any MIME).
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.18. has_body_part usage
...
if(has_body_part("application/sdp"))
{
# do interesting stuff here
}
...
The function returns true if the SIP message has an SDP body attached and at least one audio stream in on hold. The return code of the function indicates the detected hold type:
1 - RFC2543 hold type: null connection IP detected
2 - RFC3264 hold type: inactive or sendonly attributes detected
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.19. is_audio_on_hold usage
...
if(is_audio_on_hold())
{
switch ($rc) {
case 1:
# RFC2543 hold type
# do interesting stuff here
break;
case 2:
# RFC3264 hold type
# do interesting stuff here
break;
}
...
The function returns true if the SIP message has a Privacy header field that includes the given privacy_type among its privacy values. See https://www.iana.org/assignments/sip-parameters/sip-parameters.xhtml#sip-parameters-8 for possible privacy type values.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Removes from the message body all the body parts with the given mime. The necessary corrections over the Content-Type and Content-Length headers are automatically done.
If a MIME type is given, it will delete only the body parts with that mime. If no MIME given, all the parts (entire body) will be removed.
Meaning of the parameters is as follows:
mime (string, optional) - MIME type to be checked against the body parts; If not given, all parts are to remvoed;
revert (string, optional) - useful only if a MIME was specified. If "revert" string is given here, the function will delete all body parts but the ones with the given MIME.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.21. remove_body_part() usage
...
# delete entire body message (all parts)
remove_body_part();
# delete all body parts with mime "application/isup"
remove_body_part("application/isup");
# delete all body parts but keep the the ones with "application/sdp"
remove_body_part("application/sdp","revert")
...
This function can be used to add a new body part to the message body. If another part already exist, body of the message will be converted to a multi-part body automatically.
Meaning of the parameters is as follows:
body (string) - the content of the body part to be added
mime (string) - the mime string for the body part to be added
headers (string, optional) - optional list of SIP headers (fully defined, including the header separator) to be pushed into this part next to the Content-Type header.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
The function returns true if the SIP message is properly built according to SIP RFC3261. It verifies if the mandatory headers for each request/reply and can also check the format of the headers body.
The flags parameter received is optional and can be composed with the following values:
's' - checks the integrity of the SDP body, if it exists
'h' - checks the format and integrity of each header body.
'm' - don't check the Max-Forwards header.
'r' - checks the R-URI and whether the domain contains valid characters.
'f' - checks the URI of the 'From' field and whether the domain contains valid characters.
't' - checks the URI of the 'To' field and whether the domain contains valid characters.
'c' - checks the URI of the 'Contact' field.
The result_pvar parameter sets resulting pvar with text error reason in case of negative result ( easy for logging or propagating the rejection reason back to the bogus UA )
This function can return the following codes:
1 - the message is RFC3261 compliant and has been successfully validated.
-1 - No SIP message
-2 - Header Parsing error
-3 - No Call-ID header
-4 - No Content-Length header for transports that require it ( eg. TCP )
-5 - Invalid Content-Length, other from the size of the actual body
-6 - SDP body parsing error.
-7 - No Cseq header.
-8 - No From header.
-9 - No To header.
-10 - No Via header.
-11 - Request URI parse error.
-12 - Bad hostname in R-URI.
-13 - No Max-Forwards header.
-14 - No Contact header.
-15 - Path user for non-Register request.
-16 - No allow header in 405 reply.
-17 - No Min-Expire header in 423 reply.
-18 - No Proxy-Authorize header in 407 reply.
-19 - No Unsupported header in 420 reply.
-20 - No WWW-Authorize header in 401 reply.
-21 - No Content-Type header
-22 - To header parse error
-23 - Bad hostname in To header
-24 - From header parse error
-25 - Bad hostname in From header
-26 - Contact header parse error
-27 - Bad URI username
-28 - Bad From URI username
-29 - Bad To URI username
-255 - undefined errors.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE and BRANCH_ROUTE.
Example 1.23. sipmsg_validate usage
...
if(!sipmsg_validate())
{
send_reply(400, "Bad Request");
exit;
}
...
...
# checks also the SDP and headers body
if(!sipmsg_validate("sh", $var(err_reason)))
{
send_reply(400, "Bad Request/Body");
exit;
}
...
This function can be used to verify if a codec exists inside an sdp payload. It will search for the codec inside all streams from all sdp sessions. If it is found anywhere it will return TRUE otherwise it will return FALSE.
Parameters:
name (string) - Parameter is CASE INSENSITIVE.
clock (string, optional) - if not supplied any clockrate will match. Parameter is CASE INSENSITIVE.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
This function can be used to delete a codec from inside an sdp payload. It will search for the codec inside all streams from all sdp sessions. If it is found anywhere it will be deleted from the mapping ("a=...") and from the list of indexes ("m=..."). Returns TRUE if any deletion occurred otherwise it will return FALSE.
name (string) - Parameter is CASE INSENSITIVE.
clock (string, optional) - if not supplied any clockrate will match and all will be deleted. Parameter is CASE INSENSITIVE.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
This function can be used to move a codec up in the list of indexes ("m=..."). It will search for the codec inside all streams from all sdp sessions. If it is found anywhere it will be moved to the top of the index list. Returns TRUE if any moves occurred otherwise it will return FALSE.
name (string) - parameter is CASE INSENSITIVE.
clock (string, optional) - if not supplied any clockrate will match and all codecs will be moved to the front while preserving their original ordering. Parameter is CASE INSENSITIVE.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
This function can be used to move a codec down in the list of indexes ("m=..."). It will search for the codec inside all streams from all sdp sessions. If it is found anywhere it will be moved to the back of the index list. Returns TRUE if any moves occurred otherwise it will return FALSE. The second parameter is optional, if it is not supplied any clockrate will match and all codecs will be moved to the back while preserving their original ordering. Parameters are CASE INSENSITIVE.
name (string) - parameter is CASE INSENSITIVE.
clock (string, optional) - if not supplied any clockrate will match and all codecs will be moved to the back while preserving their original ordering. Parameter is CASE INSENSITIVE.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.27. codec_move_down usage
...
codec_move_down("speex");
or
codec_move_down("GSM", "8000");
...
Example 1.28. codec_move_down usage
...
/*
This example will move speex with 8000 codec to the back of the list,
then it will erase GSM with 8000 clock, and then it will bring all
speex codecs to the front of the list. Speex/8000 will be behind any
other speex.
*/
codec_move_down("speex", "8000");
codec_delete("GSM", "8000");
codec_move_up("speex");
...
This function has the same effect as codec_exists ( without the clock parameter ) the only difference is that it takes a POSIX regular expression as a parameter.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
This function has the same effect as codec_delete ( without the clock parameter ) the only difference is that it takes a POSIX regular expression as a parameter.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
This function deletes all the codecs except those specified by the regular expression.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.31. codec_delete_except_re usage
...
codec_delete_except_re("PCMA|PCMU");#will delete all codecs except PCMA and PCMU
...
This function has the same effect as codec_move_up ( without the clock parameter ) the only difference is that it takes a POSIX regular expression as a parameter.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
This function has the same effect as codec_move_down ( without the clock parameter ) the only difference is that it takes a POSIX regular expression as a parameter.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.34. codec_move_down usage
...
/*
This example will move speex with 8000 codec to the back of the list,
then it will erase GSM with 8000 clock, and then it will bring all
speex codecs to the front of the list. Speex/8000 will be behind any
other speex.
*/
codec_move_down("speex","8000");
codec_delete("GSM","8000");
codec_move_up("speex");
...
Intercept a SIP reply (in any onreply_route) and change its status code and reason phrase prior to propogating it.
Meaning of the parameters is as follows:
code (int) - Status code.
reason (string) - Reason phrase.
This function can be used from ONREPLY_ROUTE.
Example 1.35. change_reply_status usage
...
onreply_route {
if ($rs == "603") {
change_reply_status(404, "Not Found");
exit;
}
}
...
This function can be used to verify if a stream exists inside an sdp payload. It will search for the stream inside all sdp sessions. If it is found anywhere it will return TRUE otherwise it will return FALSE.
Meaning of the parameters is as follows:
regexp - a POSIX regular expression to match the stream media name.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
This function can be used to delete a whole stream from inside an sdp payload. It will search for the stream inside all sdp sessions. If it is found anywhere it will be deleted along with all attributes Returns TRUE if any deletion occurred otherwise it will return FALSE.
Meaning of the parameters is as follows:
regexp - a POSIX regular expression to match the stream media name.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Checks and returns true if the given option/token is listed in the body of the given header. The header must have its body formated as a CSV list of tokens/option (like the Supported, Require, Content-Dispsition headers) body format
Meaning of the parameters is as follows:
hdr_name (string) - the name of the header to be checked. Note that all instances of that header will be checked (if the header has multiple instances in the SIP message). Any kind of header name is supported - RFC3261 standard, RFC extensions or custom names.
opt (string) - the option/tolen to be searched for.
The function returns true if the options was found listed in one of the header instances. If no header was found, if the option was not found or if there was a parsing or runtime error, false will be returned.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.38. list_hdr_has_option usage
...
# check if 100rel is advertised
if (list_hdr_has_option("Supported", "100rel"))
xlog("100rel option found\n");
...
Add a new option/token at the end of the list in the body of the given header. The header must have its body formated as a CSV list of tokens/option (like the Supported, Require, Content-Disposition headers) body format
Multiple add / remove operations can be performed over the same header.
Meaning of the parameters is as follows:
hdr_name (string) - the name of the header where the option has to be added. If multiple instances of that header are present in the SIP message, the add will be performed on the first instance. Any kind of header name is supported - RFC3261 standard, RFC extensions or custom names.
opt (string) - the option/token to be added to the CSV list. Note there is not verification for duplicated (if the newly added option is not already present in the header).
The function returns true if the options was successfully added to the listed of the given header. If no header was found or if there was a parsing or runtime error, false will be returned.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.39. list_hdr_add_option usage
...
# add 100rel for advertising
if (!list_hdr_has_option("Supported", "100rel"))
list_hdr_add_option("Supported", "100rel");
Removes an option/token from the list inside the body of the given header. The header must have its body formated as a CSV list of tokens/option (like the Supported, Require, Content-Dispsition headers) body format
Multiple add / remove operations can be performed over the same header.
Meaning of the parameters is as follows:
hdr_name (string) - the name of the header where the option has to be removed from. If the option is duplicated in the same header, only the last one will be removed. If multiple instances of that header are present in the SIP message, the remove will be performed on all instance instance. Any kind of header name is supported - RFC3261 standard, RFC extensions or custom names.
opt (string) - the option/token to be removed from the CSV list. Note that if this the only option in the header, the whole header will be removed.
The function returns true if the options was successfully removed from at least one heaer instance. If no header was found or if the token was not found or if there was a parsing or runtime error, false will be returned.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, BRANCH_ROUTE and LOCAL_ROUTE.
Example 1.40. list_hdr_remove_option usage
...
# add 100rel for advertising
if (list_hdr_has_option("Supported", "100rel"))
list_hdr_remove_option("Supported", "100rel");
list_hdr_add_option("Supported", "optionX");
Table 2.1. Top contributors by DevScore(1), authored commits(2) and lines added/removed(3)
| Name | DevScore | Commits | Lines ++ | Lines -- | |
|---|---|---|---|---|---|
| 1. | Bogdan-Andrei Iancu (@bogdan-iancu) | 62 | 34 | 1914 | 677 |
| 2. | Liviu Chircu (@liviuchircu) | 59 | 27 | 809 | 1510 |
| 3. | Razvan Crainea (@razvancrainea) | 48 | 21 | 2968 | 105 |
| 4. | Vlad Paiu (@vladpaiu) | 9 | 4 | 281 | 68 |
| 5. | Mihai Tiganus (@tallicamike) | 6 | 3 | 155 | 28 |
| 6. | Vlad Patrascu (@rvlad-patrascu) | 4 | 2 | 49 | 13 |
| 7. | Ovidiu Sas (@ovidiusas) | 4 | 2 | 22 | 1 |
| 8. | Peter Lemenkov (@lemenkov) | 4 | 2 | 2 | 2 |
| 9. | Boris Ratner | 4 | 1 | 129 | 46 |
| 10. | Julián Moreno Patiño | 3 | 1 | 8 | 8 |
All remaining contributors: Fabian Gast (@fgast), Alexey Vasilyev (@vasilevalex), Jarrod Baumann (@jarrodb), Ezequiel Lovelle (@lovelle), Maksym Sobolyev (@sobomax), Walter Doekes (@wdoekes), Nick Altmann (@nikbyte), Ionut Ionita (@ionutrazvanionita), Dan Pascu (@danpascu).
(1) DevScore = author_commits + author_lines_added / (project_lines_added / project_commits) + author_lines_deleted / (project_lines_deleted / project_commits)
(2) including any documentation-related commits, excluding merge commits. Regarding imported patches/code, we do our best to count the work on behalf of the proper owner, as per the "fix_authors" and "mod_renames" arrays in opensips/doc/build-contrib.sh. If you identify any patches/commits which do not get properly attributed to you, please submit a pull request which extends "fix_authors" and/or "mod_renames".
(3) ignoring whitespace edits, renamed files and auto-generated files
Table 2.2. Most recently active contributors(1) to this module
| Name | Commit Activity | |
|---|---|---|
| 1. | Razvan Crainea (@razvancrainea) | Feb 2012 - Jun 2023 |
| 2. | Liviu Chircu (@liviuchircu) | Nov 2012 - Oct 2022 |
| 3. | Bogdan-Andrei Iancu (@bogdan-iancu) | Feb 2012 - Mar 2022 |
| 4. | Maksym Sobolyev (@sobomax) | Mar 2021 - Mar 2021 |
| 5. | Dan Pascu (@danpascu) | May 2019 - May 2019 |
| 6. | Vlad Patrascu (@rvlad-patrascu) | May 2017 - Apr 2019 |
| 7. | Alexey Vasilyev (@vasilevalex) | Jan 2019 - Jan 2019 |
| 8. | Fabian Gast (@fgast) | Nov 2018 - Nov 2018 |
| 9. | Peter Lemenkov (@lemenkov) | Jan 2013 - Jun 2018 |
| 10. | Ovidiu Sas (@ovidiusas) | Feb 2018 - Feb 2018 |
All remaining contributors: Jarrod Baumann (@jarrodb), Julián Moreno Patiño, Ionut Ionita (@ionutrazvanionita), Ezequiel Lovelle (@lovelle), Vlad Paiu (@vladpaiu), Mihai Tiganus (@tallicamike), Boris Ratner, Nick Altmann (@nikbyte), Walter Doekes (@wdoekes).
(1) including any documentation-related commits, excluding merge commits
Last edited by: Razvan Crainea (@razvancrainea), Liviu Chircu (@liviuchircu), Vlad Patrascu (@rvlad-patrascu), Fabian Gast (@fgast), Bogdan-Andrei Iancu (@bogdan-iancu), Peter Lemenkov (@lemenkov), Ovidiu Sas (@ovidiusas), Julián Moreno Patiño, Mihai Tiganus (@tallicamike), Vlad Paiu (@vladpaiu), Boris Ratner, Nick Altmann (@nikbyte).
Documentation Copyrights:
Copyright © 2003 FhG FOKUS