Table of Contents
enable_stats (integer)hash_size (integer)log_profile_hash_size (integer)rr_param (string)default_timeout (integer)dlg_extra_hdrs (string)dlg_match_mode (integer)db_url (string)db_mode (integer)db_update_period (integer)options_ping_interval (integer)reinvite_ping_interval (integer)table_name (string)call_id_column (string)from_uri_column (string)from_tag_column (string)to_uri_column (string)to_tag_column (string)from_cseq_column (string)to_cseq_column (string)from_route_column (string)to_route_column (string)from_contact_column (string)to_contact_column (string)from_sock_column (string)to_sock_column (string)dlg_id_column (string)state_column (string)start_time_column (string)timeout_column (string)profiles_column (string)vars_column (string)sflags_column (string)mflags_column (string)flags_column (string)profiles_with_value (string)profiles_no_value (string)db_flush_vals_profiles (int)timer_bulk_del_no (int)race_condition_timeout (int)cachedb_url (string)profile_value_prefix (string)profile_no_value_prefix (string)profile_size_prefix (string)profile_timeout (int)dialog_replication_cluster (int)profile_replication_cluster (int)replicate_profiles_buffer (string)replicate_profiles_check (string)replicate_profiles_timer (string)replicate_profiles_expire (string)cluster_auto_sync (string)create_dialog([flags])
match_dialog([dlg_match_mode])
validate_dialog()
fix_route_dialog()
get_dialog_info(attr,avp,key,key_val,no_dlgs)
get_dialog_vals(names,vals,callid)
get_dialogs_by_val(name,value,out_avp,out_dlg_no)
get_dialogs_by_profile(name,value,out_avp,out_dlg_no)
load_dialog_ctx( dialog [, id_type])
unload_dialog_ctx()
set_dlg_profile(profile,[value])
unset_dlg_profile(profile,[value])
is_in_profile(profile,[value])
get_profile_size(profile,[value],size)
set_dlg_flag(idx)
test_and_set_dlg_flag(idx, value)
reset_dlg_flag(idx)
is_dlg_flag_set(idx)
store_dlg_value(name,val)
fetch_dlg_value(name,val)
set_dlg_sharing_tag(tag_name)
dlg_on_answer([route_name])
dlg_on_timeout([route_name])
dlg_on_hangup([route_name])
dlg_send_sequential(method, leg, [, body] [, content-type] [, headers])
List of Tables
List of Examples
enable_stats parameterhash_size parameterhash_size parameterrr_param parameterdefault_timeout parameterdlf_extra_hdrs parameterdlg_match_mode parameterdb_url parameterdb_mode parameterdb_update_period parameteroptions_ping_interval parameterreinvite_ping_interval parametertable_name parametercall_id_column parameterfrom_uri_column parameterfrom_tag_column parameterto_uri_column parameterto_tag_column parameterfrom_cseq_column parameterto_cseq_column parameterfrom_route_column parameterto_route_column parameterfrom_contact_column parameterto_contact_column parameterfrom_sock_column parameterto_sock_column parameterdlg_id_column parameterstate_column parameterstart_time_column parametertimeout_column parameterprofiles_column parametervars_column parametersflags_column parametermflags_column parameterflags_column parameterprofiles_with_value parameterprofiles_no_value parameterdb_flush_vals_profiles parametertimer_bulk_del_no parameterrace_condition_timeout parametercachedb_url parameterprofile_value_prefix parameterprofile_no_value_prefix parameterprofile_size_prefix parameterprofile_timeout parameterdialog_replication_cluster parameterprofile_replication_cluster parameterreplicate_profiles_buffer parameterreplicate_profiles_check parameterreplicate_profiles_timer parameterreplicate_profiles_expire parametercluster_auto_sync parametercreate_dialog() usagematch_dialog() usagevalidate_dialog() usagefix_route_dialog() usageget_dialog_info usageget_dialog_vals usageget_dialog_vals usageget_dialog_vals usageload_dialog_ctx usageset_dlg_profile usageunset_dlg_profile usageis_in_profile usageget_profile_size usageset_dlg_flag usagetest_and_set_dlg_flag usagereset_dlg_flag usageis_dlg_flag_set usagestore_dlg_value usagefetch_dlg_value usageset_dlg_sharing_tag usagedlg_on_answer usagedlg_on_timeout usagedlg_on_hangup usagedlg_send_sequential usage to convert DTMF codesThe dialog module provides dialog awareness to the OpenSIPS proxy. Its functionality is to keep trace of the current dialogs, to offer information about them (like how many dialogs are active).
Aside tracking, the dialog module offers functionalities like flags and attributes per dialog (persistent data across dialog), dialog profiling and dialog termination (on timeout base or external triggered).
The module, via an internal API, also provide the foundation to build on top of it more complex dialog-based functionalities via other OpenSIPS modules.
To create the dialog associated with an initial request, you must call the create_dialog() function, with or without parameter.
The dialog is automatically destroyed when a “BYE” is received. In case of no “BYE”, the dialog lifetime is controlled via the default timeout (see “default_timeout” - default_timeout) and custom timeout (see “$DLG_timeout” - $DLG_timeout).
Dialog profiling is a mechanism that helps in classifying, sorting and keeping trace of certain types of dialogs, using whatever properties of the dialog (like caller, destination, type of calls, etc). Dialogs can be dynamically added in different (and several) profile tables - logically, each profile table can have a special meaning (like dialogs outside the domain, dialogs terminated to PSTN, etc).
There are two types of profiles:
with no value - a dialog simply belongs to a profile. (like outbound calls profile). There is no other additional information to describe the dialog's belonging to the profile;
with value - a dialog belongs to a profile having a certain value (like in caller profile, where the value is the caller ID). The belonging of the dialog to the profile is strictly related to the value.
A dialog can be added to multiple profiles in the same time.
Profiles are visible (at the moment) in the request route (for initial and sequential requests) and in the branch, failure and reply routes of the original request.
Dialog profiles can also be used in distributed systems, using the OpenSIPS CacheDB Interface or the clusterer module. This feature allows you to share dialog profile information with multiple OpenSIPS instaces that use the same CacheDB backend or are part of an OpenSIPS cluster. In order to do that, the cachedb_url or profile_replication_cluster parameters must be defined. Also, the profile must be marked as shared, by adding one of the '/s' or '/b' suffixes to the name of the profile in the profiles_with_value or profiles_no_value parameters.
Dialog replication is a mechanism used to mirror all dialog changes taking place in one OpenSIPS instance to one or multiple other instances. The process is simplified by using the clusterer module which facilitates the management of a cluster of OpenSIPS nodes and the sending of replication-related BIN packets (binary-encoded, using proto_bin). This feature is useful in achieving High Availability and/or Load Balancing for ongoing calls.
Configuring both receival and sending of dialog replication packets is trivial and can be done by using the dialog_replication_cluster parameter. But in addition to just sharing data, in order to properly cluster dialogs you will need to manage which node in the cluster is doing certain actions on certain dialogs using the sharing tags mechanism. For details and configuration examples on how this would work in different usage scenarios, see this article.
The following actions will not be performed for a dialog marked with a sharing tag that is in the "backup" state:
sending Re-Invite or OPTIONS pings to end-points
generating BYE requests or any other actions(like producing CDRs) upon dialog expiration
sending replication packets on dialog events(update, delete)
counting the dialog in the profiles that it belongs; only if profile replication is also enabled
In addition to the event-driven replication, an OpenSIPS instance will first try to learn all the dialog information from antoher node in the cluster at startup. The data synchronization mechanism requires defining one of the nodes in the cluster as a "seed" node. See the clusterer module for details on how to do this and why is it needed.
In the context of dialog replication, using a database as a failsafe for obtaining restart persistency for dialog data is useful in case all nodes in the cluster are down. This approach makes the most sense if a separate, local DB is used for each node in the cluster. Dialogs loaded from the database at startup, which are not reconfirmed through syncing, are dropped and also deleted from the database once the sync from cluster is complete.
Also configuring profile replication via the profile_replication_cluster parameter is not necessary when dialog replication is already configured. The profile information is included in the dialog updates sent in the dialog replication cluster. The profiles must still be marked for sharing though in the profiles_with_value or profiles_no_value parameters.
A scenario were both profile and dialog replication should be configured is when a platform has multiple POPs, where separate dialog replication clusters are configured for HA purposes, and a cluster for globally shared profiles is also required. In this case, proper counting for dialogs is ensured by using the sharing tags mechanism(in order to avoid counting each dialog twice, both on the active and backup node for that dialog).
The following modules must be loaded before this module:
TM - Transaction module
RR - Record-Route module, optional, if Dialog ID matching is used in non Topo Hiding cases
clusterer - if replication_cluster parameter is set (contact replication via clusterer module)
If the statistics support should be enabled or not. Via statistic variables, the module provide information about the dialog processing. Set it to zero to disable or to non-zero to enable it.
Default value is “1 (enabled)”.
The size of the hash table internally used to keep the dialogs. A larger table is much faster but consumes more memory. The hash size must be a power of 2 number.
IMPORTANT: If dialogs' information should be stored in a database, a constant hash_size should be used, otherwise the restored process will not take place. If you really want to modify the hash_size you must delete all table's rows before restarting OpenSIPS.
Default value is “4096”.
The size of the hash table internally used to store profile->dialog associations. A larger table can provide more parallel operations but consumes more memory. The hash size is provided as the base 2 logarithm(e.g. log_profile_hash_size =4 means the table has 2^4 entries).
Default value is “4”.
Example 1.3. Set hash_size parameter
...
modparam("dialog", "log_profile_hash_size", 5) #set a table size of 32
...
Name of the Record-Route parameter to be added with the dialog cookie. It is used for fast dialog matching of the sequential requests.
Default value is “did”.
The default dialog timeout (in seconds) if no custom one is set.
Default value is “43200 (12 hours)”.
A string containing the extra headers (full format, with EOH) to be added in the requests generated by the module (like BYEs).
Default value is “NULL”.
Example 1.6. Set dlf_extra_hdrs parameter
...
modparam("dialog", "dlg_extra_hdrs", "Hint: credit expired\r\n")
...
How the seqential requests should be matched against the known dialogs. The modes are a combination between matching based on a cookie (DID) stored as cookie in Record-Route header and the matching based on SIP elements (as in RFC3261).
The supported modes are:
0 - DID_ONLY - the match is done exclusively based on DID;
1 - DID_FALLBACK - the match is first tried based on DID and if not present, it will fallback to SIP matching;
2 - DID_NONE - the match is done exclusively based on SIP elements; no DID information is added in RR.
Default value is “1 (DID_FALLBACK)”.
NOTE that if you have call looping on your OpenSIPS server (passing more than once through the same OpenSIPS instance), it is strongly suggested to use only DID_ONLY mode, as the SIP based matching will have an undefined behavior - from SIP perspective, a sequential dialog will match all the loops of the call, as the Call-ID, To and From TAGs are the same.
If you want to store the information about the dialogs in a database a database url must be specified.
Default value is “mysql://opensips:opensipsrw@localhost/opensips”.
Example 1.8. Set db_url parameter
...
modparam("dialog", "db_url", "dbdriver://username:password@dbhost/dbname")
...
Describe how to push into the DB the dialogs' information from memory.
The supported modes are:
0 - NO_DB - the memory content is not flushed into DB;
1 - REALTIME - any dialog information changes will be reflected into the database immediately.
2 - DELAYED - the dialog information changes will be flushed into the DB periodically, based on a timer routine.
3 - SHUTDOWN - the dialog information will be flushed into DB only at shutdown - no runtime updates.
Default value is “0”.
The interval (seconds) at which to update dialogs' information if you chose to store the dialogs' info at a given interval. A too short interval will generate intensive database operations, a too large one will not notice short dialogs.
Default value is “60”.
The interval (seconds) at which OpenSIPS will generate in-dialog OPTIONS pings for one or both of the involved parties.
Default value is “30”.
Example 1.11. Set options_ping_interval parameter
...
modparam("dialog", "options_ping_interval", 20)
...
The interval (seconds) at which OpenSIPS will generate in-dialog Re-INVITE pings for one or both of the involved parties.
Important: the ping timeout detection is performed every time this interval ticks, not when the re-INVITE transaction times out! Consequently, please make sure that the timeouts for re-INVITE transactions (e.g. the "fr_timeout" modparam of the "tm" module or its $T_fr_timeout variable) are always lower than the value of this parameter! Failing to ensure this ordering of timeouts may possibly lead to re-INVITE pings never ending a disconnected dialog due to pings getting retried before getting a chance to properly time out.
Default value is “300”.
Example 1.12. Set reinvite_ping_interval parameter
...
modparam("dialog", "reinvite_ping_interval", 600)
...
If you want to store the information about the dialogs in a database a table name must be specified.
Default value is “dialog”.
The column's name in the database to store the dialogs' callid.
Default value is “callid”.
Example 1.14. Set call_id_column parameter
...
modparam("dialog", "call_id_column", "callid_c_name")
...
The column's name in the database to store the caller's sip address.
Default value is “from_uri”.
Example 1.15. Set from_uri_column parameter
...
modparam("dialog", "from_uri_column", "from_uri_c_name")
...
The column's name in the database to store the From tag from the Invite request.
Default value is “from_tag”.
Example 1.16. Set from_tag_column parameter
...
modparam("dialog", "from_tag_column", "from_tag_c_name")
...
The column's name in the database to store the calee's sip address.
Default value is “to_uri”.
Example 1.17. Set to_uri_column parameter
...
modparam("dialog", "to_uri_column", "to_uri_c_name")
...
The column's name in the database to store the To tag from the 200 OK response to the Invite request, if present.
Default value is “to_tag”.
Example 1.18. Set to_tag_column parameter
...
modparam("dialog", "to_tag_column", "to_tag_c_name")
...
The column's name in the database to store the cseq from caller side.
Default value is “caller_cseq”.
Example 1.19. Set from_cseq_column parameter
...
modparam("dialog", "from_cseq_column", "from_cseq_c_name")
...
The column's name in the database to store the cseq from callee side.
Default value is “callee_cseq”.
Example 1.20. Set to_cseq_column parameter
...
modparam("dialog", "to_cseq_column", "to_cseq_c_name")
...
The column's name in the database to store the route records from caller side (proxy to caller).
Default value is “caller_route_set”.
Example 1.21. Set from_route_column parameter
...
modparam("dialog", "from_route_column", "from_route_c_name")
...
The column's name in the database to store the route records from callee side (proxy to callee).
Default value is “callee_route_set”.
Example 1.22. Set to_route_column parameter
...
modparam("dialog", "to_route_column", "to_route_c_name")
...
The column's name in the database to store the caller's contact uri.
Default value is “caller_contact”.
Example 1.23. Set from_contact_column parameter
...
modparam("dialog", "from_contact_column", "from_contact_c_name")
...
The column's name in the database to store the callee's contact uri.
Default value is “callee_contact”.
Example 1.24. Set to_contact_column parameter
...
modparam("dialog", "to_contact_column", "to_contact_c_name")
...
The column's name in the database to store the information about the local interface receiving the traffic from caller.
Default value is “caller_sock”.
Example 1.25. Set from_sock_column parameter
...
modparam("dialog", "from_sock_column", "from_sock_c_name")
...
The column's name in the database to store information about the local interface receiving the traffic from callee.
Default value is “callee_sock”.
Example 1.26. Set to_sock_column parameter
...
modparam("dialog", "to_sock_column", "to_sock_c_name")
...
The column's name in the database to store the dialogs' id information.
Default value is “dlg_id”.
Example 1.27. Set dlg_id_column parameter
...
modparam("dialog", "dlg_id_column", "dlg_id_c_name")
...
The column's name in the database to store the dialogs' state information.
Default value is “state”.
The column's name in the database to store the dialogs' start time information.
Default value is “start_time”.
Example 1.29. Set start_time_column parameter
...
modparam("dialog", "start_time_column", "start_time_c_name")
...
The column's name in the database to store the dialogs' timeout.
Default value is “timeout”.
Example 1.30. Set timeout_column parameter
...
modparam("dialog", "timeout_column", "timeout_c_name")
...
The column's name in the database to store the dialogs' profiles.
Default value is “profiles”.
Example 1.31. Set profiles_column parameter
...
modparam("dialog", "profiles_column", "profiles_c_name")
...
The column's name in the database to store the dialogs' vars.
Default value is “vars”.
The column's name in the database to store the dialogs' script flags.
Default value is “script_flags”.
Example 1.33. Set sflags_column parameter
...
modparam("dialog", "sflags_column", "sflags_c_name")
...
The column's name in the database to store the dialogs' module flags.
Default value is “module_flags”.
Example 1.34. Set mflags_column parameter
...
modparam("dialog", "mflags_column", "mflags_c_name")
...
The column's name in the database to store the dialogs' flags.
Default value is “flags”.
List of names (alphanumerical) for profiles with values. Flags /b or /s allow sharing profiles between OpenSIPS instances using the clusterer module or a CacheDB backend, respectively.
Default value is “empty”.
Example 1.36. Set profiles_with_value parameter
...
modparam("dialog", "profiles_with_value", "callerCC; gatewayCC; clientChannels/s; codecUsed/b;")
...
List of names (alphanumerical) for profiles without values. Flags /b or /s allow sharing profiles between OpenSIPS instances using the clusterer module or a CacheDB backend, respectively.
Default value is “empty”.
Example 1.37. Set profiles_no_value parameter
...
modparam("dialog", "profiles_no_value", "inbound ; outbound ; shared/s; repl/b;")
...
Pushes dialog values, profiles and flags into the database along with other dialog state information (see db_mode 1 and 2).
Default value is “empty”.
Example 1.38. Set db_flush_vals_profiles parameter
...
modparam("dialog", "db_flush_vals_profiles", 1)
...
The number of dialogs that should be attempted to be deleted at the same time ( a single query ) from the DB back-end.
Default value is “1”.
If dialog is created using the 'E' flag, and a SIP Race condition happens, then the dialog will be terminated after 'race_condition_timeout' seconds. Currently, the only supported race conditions are (200OK vs CANCEL) and (early BYE vs 200OK)
Default value is “5” seconds.
Example 1.40. Set race_condition_timeout parameter
...
modparam("dialog", "race_condition_timeout", 1)
...
Enables distributed dialog profiles and specifies the backend that should be used by the CacheDB interface.
Default value is “empty”.
Example 1.41. Set cachedb_url parameter
...
modparam("dialog", "cachedb_url", "redis://127.0.0.1:6379")
...
Specifies what prefix should be added to the profiles with value when they are inserted into CacheDB backed. This is only used when distributed profiles are enabled.
Default value is “dlg_val_”.
Example 1.42. Set profile_value_prefix parameter
...
modparam("dialog", "profile_value_prefix", "dlgv_")
...
Specifies what prefix should be added to the profiles without value when they are inserted into CacheDB backed. This is only used when distributed profiles are enabled.
Default value is “dlg_noval_”.
Example 1.43. Set profile_no_value_prefix parameter
...
modparam("dialog", "profile_no_value_prefix", "dlgnv_")
...
Specifies what prefix should be added to the entity that holds the profiles with value size in CacheDB backed. This is only used when distributed profiles are enabled.
Default value is “dlg_size_”.
Example 1.44. Set profile_size_prefix parameter
...
modparam("dialog", "profile_size_prefix", "dlgs_")
...
Specifies how long a dialog profile should be kept in the CacheDB until it expires. This is only used when distributed profiles are enabled.
Default value is “86400”.
Specifies the cluster ID for dialog replication using the clusterer module. This enables sending and receiving all the dialog-related events (creation, update and deletion) in the cluster.
Default value is “0” (no replication).
Example 1.46. Set dialog_replication_cluster parameter
...
modparam("dialog", "dialog_replication_cluster", 1)
...
Specifies the cluster ID for profile replication using the clusterer module. This enables sending and receiving the profile information (value, dialog count) in the cluster.
Default value is “0” (no replication).
Example 1.47. Set profile_replication_cluster parameter
...
modparam("dialog", "profile_replication_cluster", 1)
...
Used to specify the length of the buffer used by the binary replication, in bytes. Usually this should be big enough to hold as much data as possible, but small enough to avoid UDP fragmentation. The recommended value is the smallest MTU between all the replication instances.
Default value is 1400 bytes.
Example 1.48. Set replicate_profiles_buffer parameter
...
modparam("dialog", "replicate_profiles_buffer", 500)
...
Timer in seconds, used to specify how often the module should check whether old, replicated profiles values are obsolete and should be removed. should replicate its profiles to the other instances.
Default value is 10 s.
Example 1.49. Set replicate_profiles_check parameter
...
modparam("dialog", "replicate_profiles_check", 100)
...
Timer in milliseconds, used to specify how often the module should replicate its profiles to the other instances.
Default value is 10 ms.
Example 1.50. Set replicate_profiles_timer parameter
...
modparam("dialog", "replicate_profiles_timer", 100)
...
Timer in seconds, used to specify when the profiles counters received from a different instance should no longer be taken into account. This is used to prevent obsolete values, in case an instance stops replicating its counters.
Default value is 10 s.
Example 1.51. Set replicate_profiles_expire parameter
...
modparam("dialog", "replicate_profiles_expire", 10)
...
Specifies whether to automatically issue a sync request (for dialogs marked with a sharing tag in backup state) when a node becomes reachable. A value of 1 means enabled and 0 disabled.
Default value is 1 (enabled).
The function creats the dialog for the currently processed request. The request must be an initial request. Optionally,the function also receives a string parameter, which specifies special behavior to be done for the current dialog.
Parameters:
flags (string, optional) Possible values here are :
B - Upon reaching dialog lifetime, BYEs will be triggered both ways
P - Ping caller side with OPTIONS messages, once every options_ping_interval seconds
p - Ping callee side with OPTIONS messages, once every options_ping_interval seconds
R - Ping caller side with RE-INVITE messages, once every reinvite_ping_interval seconds
r - Ping callee side with RE-INVITE messages, once every reinvite_ping_interval seconds
E - Upon detecting a SIP Race condition (see RFC 5407), end the call after race_condition_timeout seconds
Multiple string flags can be used at the same time, ie. passing "BPp" flags will enable all 3 flags.
NOTE: both RE-INVITE and OPTIONS pinging cannot be enabled at the same time for a single dialog leg. If both flags ("PR" or "pr") are provided only RE-INVITE pinging will be used.
The function returns true if the dialog was successfully created or if the dialog was previously created.
This function can be used from REQUEST_ROUTE.
Example 1.53. create_dialog() usage
...
create_dialog();
...
#ping caller
create_dialog("P");
...
#ping caller and callee
create_dialog("Pp");
#bye on timeout
create_dialog("B");
...
This function is to be used to match a sequential (in-dialog) request to an ongoing dialog.
By default, dialog matching is performed according to the dlg_match_mode module parameter. A specific matching mode may be enforced by specifying the optional "dlg_match_mode" parameter. Possible values for this parameter are "DID_ONLY", "DID_FALLBACK" and "DID_NONE".
As sequential requests are automatically matched to the dialog when doing "loose_route()" from script, this function is intended to: (A) control the place in your script where the dialog matching is done and (B) to cope with bogus sequential requests that do not have Route headers, so they are not handled by loose_route().
Parameters:
dlg_match_mode (string, optional)
The function returns true if a dialog exists for the request.
This function can be used from REQUEST_ROUTE.
Example 1.54. match_dialog() usage
...
if (has_totag()) {
loose_route();
# example 1: match according to dlg_match_mode
if ($DLG_status == NULL && !match_dialog())
xlog("cannot match request to a dialog\n");
# example 2: override dlg_match_mode
if ($DLG_status == NULL && !match_dialog("DID_FALLBACK"))
xlog("cannot match request to a dialog\n");
}
...
The function checks the current received requests against the dialog (internal data) it belongs to. Performing several tests, the function will help to detect the bogus injected in-dialog requests (like malicious BYEs).
The performed tests are related to CSEQ sequence checking and routing information checking (contact and route set).
The function returns true if a dialog exists for the request and if the request is valid (according to dialog data). If the request is invalid, the following return codes are returned :
-1 - invalid cseq
-2 - invalid remote target
-3 - invalid route set
-4 - other errors ( parsing, no dlg, etc )
This function can be used from REQUEST_ROUTE.
Example 1.55. validate_dialog() usage
...
if (has_totag()) {
loose_route();
if ($DLG_status!=NULL && !validate_dialog() ) {
xlog(" in-dialog bogus request \n");
} else {
xlog(" in-dialog valid request - $DLG_dir !\n");
}
}
...
The function forces an in dialog SIP message to contain the ruri, route headers and dst_uri, as specified by the internal data of the dialog it belongs to. The function will prevent the existence of bogus injected in-dialog requests ( like malicious BYEs )
This function can be used from REQUEST_ROUTE.
Example 1.56. fix_route_dialog() usage
...
if (has_totag()) {
loose_route();
if ($DLG_status!=NULL)
if (!validate_dialog())
fix_route_dialog();
}
...
The function extracts a dialog value from another dialog. It first searches through all existing (ongoing) dialogs for all dialogs that have a dialog variable named "key" with the value "key_val" (so a dialog where $dlg_val(key)=="key_val"). If found, it returns the value of the dialog variable "attr" from all the founds dialog in the "avp" pseudo-variable, otherwise nothing is written in "avp", and a negative error code is returned.
NOTE: the function does not require to be called in the context of a dialog - you can use it whenever / whereever for searching for other dialogs.
Meaning of the parameters is as follows:
attr (string) - the name of the dialog variable (from the found dialog) to be returned;
avp (var) - an avp where to store the values of the "attr" dialog variable. Since the function checks through all dialogs, this needs to be an actual AVP in order to support pushing values from all matched dialogs.
key (string) - name of a dialog variable to be used a search key (when looking after the target dialog)
key_val (string) - the value of the dialog variable that is used as key in searching the target dialog.
no_dlgs (var) - the total number of dialogs containing the key variable
This function can be used from ALL ROUTES.
Example 1.57. get_dialog_info usage
...
if ( get_dialog_info("callee",$avp(callee_array),"caller",$fu,$var(dlg_no)) ) {
xlog("caller $fu has $var(dlg_no) other ongoing calls, talking with :");
$var(it) = 0;
while ($var(it) < $var(dlg_no)) {
$var(current_callee) = $(avp(callee_array)[$var(it)]);
xlog(" $var(current_callee) ");
$var(it) = $var(it) + 1;
}
xlog("\n");
}
# create dialog for current call and place the caller and callee attributes
create_dialog();
$dlg_val(caller) = $fu;
$dlg_val(callee) = $ru;
...
The function fetches all the dialog variables of another dialog. It first searches through all existing (ongoing) dialogs based on the given SIP CallID. If found, it returns all the dialog variables as two parallel arrays of names and values (using the given variables "names" and "vals"). As these variables have to hold arrays, they must be AVPs.
NOTE: the function does not require to be called in the context of a dialog - you can use it whenever / whereever for searching for other dialogs.
Meaning of the parameters is as follows:
names (var) - an AVP variable to hold all the names of the variables from the found dialog.
vals (var) - an AVP variable to hold all the values of the variables from the found dialog.
callid (string) - the callid of a dialog to be searched (and have the variables fetched).
This function can be used from any type of route.
Example 1.58. get_dialog_vals usage
...
if ( get_dialog_vals($avp(d_names),$avp(d_vals),$var(callid)) ) {
xlog("the call $var(callid) has the variables:\n);
$var(i) = 0;
while ( $(avp(d_names)[$var(i)])!=NULL ) {
xlog("var $var(i) is $(avp(d_names)[$var(i)])='$(avp(d_vals)[$var(i)])'\n");
$var(i) = $var(i) + 1;
}
}
...
The function looks up through the whole dialog table for dialogs containing a $dlg_val with the provided name and value, and returns all the $DLG_ctx_json variables for the matched dialogs, storing them in the provided out_avp. The total number of matched dialogs is returned in the out_dlgs_no variable
NOTE: the function does not require to be called in the context of a dialog - you can use it whenever / whereever for searching for other dialogs.
Meaning of the parameters is as follows:
name (string) - the name of the dialog variable used for the lookup
value (string) - the value of the above dialog val
out_avp (var) - the AVP which will be populated will the dialog JSONs for all the matched calls
dlg_no (var) - the out var which will contain the total number of matched dialogs
This function can be used from any type of route.
Example 1.59. get_dialog_vals usage
...
if ( get_dialogs_by_val("caller",$fU,$avp(dlg_jsons),$avp(dlg_no)) ) {
xlog("Caller $fU has $avp(dlg_no) other calls \n);
$var(i) = 0;
while ( $(avp(dlg_jsons)[$var(i)])!=NULL ) {
$json(dlg_info) := $(avp(dlg_jsons)[$var(i)]);
# fetch any info for the above call and process it
$var(i) = $var(i) + 1;
}
}
...
The function looks up through the whole dialog table for dialogs configured to be within the provided dialog profile name, and optionally with the provided profile value. The function returns all the $DLG_ctx_json variables for the matched dialogs, storing them in the provided out_avp. The total number of matched dialogs is returned in the out_dlgs_no variable
NOTE: the function does not require to be called in the context of a dialog - you can use it whenever / whereever for searching for other dialogs.
Meaning of the parameters is as follows:
name (string) - the name of the dialog profile used for the lookup
value (string) - the value of the above dialog profile ( optional )
out_avp (var) - the AVP which will be populated will the dialog JSONs for all the matched calls
dlg_no (var) - the out var which will contain the total number of matched dialogs
This function can be used from any type of route.
Example 1.60. get_dialog_vals usage
...
if ( get_dialogs_by_profile("caller",$fU,$avp(dlg_jsons),$avp(dlg_no)) ) {
xlog("Caller $fU has $avp(dlg_no) other calls \n);
$var(i) = 0;
while ( $(avp(dlg_jsons)[$var(i)])!=NULL ) {
$json(dlg_info) := $(avp(dlg_jsons)[$var(i)]);
# fetch any info for the above call and process it
$var(i) = $var(i) + 1;
}
}
...
The function loads and switches to the context of the given dialog. The context of a dialog is given by the dialog flags, variables, profiles and any other value/state related to the dialog. By switching to the context of another dialog, you will see at the script level, by default, all the data from the new dialog.
NOTE: you cannot perform a new load until doing an unload - no nested loadings are possible.
Meaning of the parameters is as follows:
dialog (string) - the identifier of the dialog to be loaded, it may be a SIP Call-ID or a Dialog ID.
id_type (string,optional) - what kind of dialog identified was used in the first parameter. It can be callid (SIP Call-ID) or did (internal Dialog ID). By default callid will be assumed.
This function can be used from any type of route.
Example 1.61. load_dialog_ctx usage
...
if (load_dialog_ctx("$var(callid)")) {
xlog("The dialog '$var(callid)' already has a duration "
"of $DLG_lifetime seconds\n");
if (is_in_profile("inboundCall"))
xlog("this dialog is an inbound call\n");
unload_dialog_ctx();
}
...
The function off-loads the loaded context of another dialog, exposing whatever dialog context was present before doing the load.
NOTE: you MUST perform from script an explicit unload for each load you did, otherwise the loaded dialog will remain hanged for ever.
This function can be used from any type of route.
For usage example, see the load_dialog_ctx()
Inserts the current dialog into a profile. Note that if the profile does not support values, this will be silently discarded. A dialog may be inserted in the same profile multiple times.
NOTE: the dialog must be created before using this function (use create_dialog() function before).
Meaning of the parameters is as follows:
profile (string) - name of the profile to be added to.
value (string, optional) - string value to define the belonging of the dialog to the profile - note that the profile must support values.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.62. set_dlg_profile usage
...
set_dlg_profile("inboundCall");
set_dlg_profile("caller",$fu);
...
Removes the current dialog from a profile.
NOTE: the dialog must be created before using this function (use create_dialog() function before).
Meaning of the parameters is as follows:
profile (string) - name of the profile to be removed from.
value (string, optional) - string value to define the belonging of the dialog to the profile - note that the profile must support values.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.63. unset_dlg_profile usage
...
unset_dlg_profile("inboundCall");
unset_dlg_profile("caller",$fu);
...
Checks if the current dialog belongs to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - if the dialog was inserted into the profile for a specific value. If no value is passed, only simply belonging of the dialog to the profile is checked. Note that if the profile does not support values, this will be silently discarded.
NOTE: the dialog must be created before using this function (use create_dialog() function before).
Meaning of the parameters is as follows:
profile (string) - name of the profile to be checked against.
value (string. optional) - string value to toughen the check.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.64. is_in_profile usage
...
if (is_in_profile("inboundCall")) {
log("this request belongs to a inbound call\n");
}
...
if (is_in_profile("caller","XX")) {
log("this request belongs to a call of user XX\n");
}
...
Returns the number of dialogs belonging to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - how many dialogs were inserted into the profile with a specific value. If not value is passed, only simply belonging of the dialog to the profile is checked. Note that the profile does not supports values, this will be silently discarded.
Meaning of the parameters is as follows:
profile (string) - name of the profile to get the size for.
value (string, optional) - string value to toughen the check.
size (var) - an AVP or script variable to return the profile size in.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.65. get_profile_size usage
modparam("dialog", "profiles_no_value", "inboundCalls")
modparam("dialog", "profiles_with_value", "caller")
...
get_profile_size("inboundCalls",,$var(size));
xlog("inboundCalls: $var(size)\n");
...
get_profile_size("caller", $fu, $var(size));
xlog("currently, the user $fu has $var(size) active outgoing calls\n");
...
Sets the dialog flag index idx to true. The dialog flags are dialog persistent and they can be accessed (set and test) for all requests belonging to the dialog.
Parameters:
idx (int) - The flag index can be between 0 and 31.
NOTE: the dialog must be created before using this function (use create_dialog() function before).
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Atomically checks if the dialog flag index idx is equal to value. If true, changes the value with the opposite one. This operation is done under the dialog lock.
idx (int) - The flag index can be between 0 and 31.
value (int) - The value should be 0 (false) or 1 (true).
NOTE: the dialog must be created before using this function (use create_dialog() function before).
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Resets the dialog flag index idx to false. The dialog flags are dialog persistent and they can be accessed (set and test) for all requests belonging to the dialog.
Parameters:
idx (int) - The flag index can be between 0 and 31.
NOTE: the dialog must be created before using this function (use create_dialog() function before).
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Returns true if the dialog flag index idx is set. The dialog flags are dialog persistent and they can be accessed (set and test) for all requests belonging to the dialog.
Parameters:
idx (int) - The flag index can be between 0 and 31.
NOTE: the dialog must be created before using this function (use create_dialog() function before).
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.69. is_dlg_flag_set usage
...
if (is_dlg_flag_set(16)) {
xlog("dialog flag 16 is set\n");
}
...
Attaches to the dialog the value val under the name name. The values attached to dialogs are dialog persistent and they can be accessed (read and write) for all requests belonging to the dialog.
Parameters:
name (string)
val (string)
NOTE: the dialog must be created before using this function (use create_dialog() function before).
Same functionality may be obtain by assigning a value to pseudo variable $dlg_val(name).
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.70. store_dlg_value usage
...
store_dlg_value("inv_src_ip",$si);
store_dlg_value("account type","prepaid");
# or
$dlg_val(account_type) = "prepaid";
...
Fetches from the dialog the value of attribute named name. The values attached to dialogs are dialog persistent and they can be accessed (read and write) for all requests belonging to the dialog.
Parameters:
name (string)
val (var)
NOTE: the dialog must be created before using this function (use create_dialog() function before).
Same functionality may be obtain by reading the pseudo variable $dlg_val(name).
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.71. fetch_dlg_value usage
...
fetch_dlg_value("inv_src_ip",$avp(2));
fetch_dlg_value("account type",$var(account));
# or
$var(account) = $dlg_val(account_type);
...
Marks the current dialog with the sharing tag tag_name. From this point on, actions like in-dialog pinging, BYEs on timeout etc. will depend on the tag state(no action in "backup" state, normal operation in "active" state).
For more details see the Dialog clustering chapter.
Parameters:
tag_name (string)
NOTE: the dialog must be created before using this function (use create_dialog() function before).
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
The function arms a script route to be executed when the current dialog will be later answered. When the route will be executed, the dialog context will be exposed, but with no valid SIP message (just a phony one).
You must use this function AFTER creating the dialog and before the dialog being answered.
If the parameter is missing, the function does a reset of any route previously set; there will be no triggering.
Parameters:
route_name (string,optional) - the name of the script route to be executed.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.73. dlg_on_answer usage
...
create_dialog();
dlg_on_answer("dlg_answered");
...
route[dlg_answered] {
xlog("The dialog $DLG_did was answered\n");
}
The function arms a script route to be executed when (and if) the current dialog will timeout (as duration). When the route will be executed, the dialog context will be exposed, but with no valid SIP message (just a phony one)
When the route is executed, the dialog is not yet terminated, just its lifetime reached the set limit. In the timeout route you can increase the dialog expiration timeout (and the dialog will continue) or you can let the dialog to be terminated (after the end of this route).
You must use this function AFTER creating the dialog and before the dialog being answered.
You must use this function AFTER creating the dialog and before the dialog being answered.
Parameters:
route_name (string,optional) - the name of the script route to be executed.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.74. dlg_on_timeout usage
...
create_dialog();
$DLG_timeout=120;
dlg_on_timeout("dlg_timeout");
...
route[dlg_timeout] {
xlog("The dialog $DLG_did timed out\n");
if (_some_prolongation_condition)
$DLG_timeout = 60; # give it 1 min more
}
The function arms a script route to be executed when the current dialog will be terminated. When the route will be executed, the dialog context will be exposed, but with no valid SIP message (just a phony one). Note that the dialog will be already terminated and there is nothing you can do about it besides reading data from its context.
You must use this function AFTER creating the dialog and before the dialog being answered.
If the parameter is missing, the function does a reset of any route previously set; there will be no triggering.
Parameters:
route_name (string,optional) - the name of the script route to be executed.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, REPLY_ROUTE and FAILURE_ROUTE.
Example 1.75. dlg_on_hangup usage
...
create_dialog();
dlg_on_hangup("dlg_hangup");
...
route[dlg_hangup] {
xlog("The dialog $DLG_did terminated after $DLG_lifetime secs\n");
}
Used to send an in-dialog request towards one if the dialog's legs. The function assumes that is runs inside a dialog context - if you are running it from a different context (such as an event_route), make sure you first load the dialog context using the load_dialog_ctx() function.
Parameters:
method (string) - the method of the request sent.
leg (string) - the leg where the request is sent. Must be either caller or callee.
body (string, optional) - an optional body sent in the request. If missing, no body is sent.
content-type (string, optional) - the content type of the body sent. Make sure you specify this every time you send a request with a body, otherwise there are high changes that your UAC will reject the request.
headers (string, optional) - additional headers attached to the request sent.
This function can be used from ANY route.
Example 1.76. dlg_send_sequential usage to convert DTMF codes
...
event_route[E_RTPPROXY_DTMF] {
if (load_dialog_ctx("$param(id)", "did")) {
if ($param(stream) == 0) {
$var(direction) = "callee";
} else {
$var(direction) = "caller";
}
dlg_send_sequential($var(direction), "INFO",
"Signal=$param(digit)\nDuration=160",
"application/dtmf-relay");
unload_dialog_ctx();
}
}
...
Returns the total number of processed dialogs (terminated, expired or active) from the startup.
Returns the number of failed dialogs ( dialogs were never established due to whatever reasons - internal error, negative reply, cancelled, etc )
Returns the number of replicated dialog create requests send to other OpenSIPS instances.
Returns the number of replicated dialog update requests send to other OpenSIPS instances.
Returns the number of replicated dialog delete requests send to other OpenSIPS instances.
Returns the number of dialog create events received from other OpenSIPS instances.
Returns the number of dialog update events received from other OpenSIPS instances.
Lists the description of the dialogs (calls). If no parameter is given, all dialogs will be listed. If a dialog identifier is passed as parameter (callid and fromtag), only that dialog will be listed. If a index and conter parameter is passed, it will list only a number of "counter" dialogs starting with index (as offset) - this is used to get only section of dialogs.
Name: dlg_list
Parameters (with dialog idetification):
callid (optional) - callid if a single dialog to be listed.
from_tag (optional, but cannot be present without the callid parameter) - fromtag (as per initial request) of the dialog to be listed. entry
Parameters (with dialog counting):
index - offset where the dialog listing should start.
counter - how many dialogs should be listed (starting from the offset)
MI FIFO Command Format:
## list all ongoing dialogs opensips-cli -x mi dlg_list ## list the dialog by callid and From TAG opensips-cli -x mi dlg_list callid=abcdrssfrs122444@192.168.1.1 from_tag=AAdfeEFF33 ## list 10 dialogs, starting from the position 40 ## (in the list of all ongoing dialogs) opensips-cli -x mi dlg_list index=40 counter=10
The same as the “dlg_list” but including in the dialog description the associated context from modules sitting on top of the dialog module. This function also prints the dialog's values. In case of binary values, the non-printable chars are represented in hex (e.g. \x00)
Name: dlg_list_ctx
Parameters: see “dlg_list”
MI FIFO Command Format:
opensips-cli -x mi dlg_list_ctx
Terminates an ongoing dialog. If dialog is established, BYEs are sent in both directions. If dialog is in unconfirmed or early state, a CANCEL will be sent to the callee side, that will trigger a 487 from the callee, which, when relayed, will also end the dialog on the caller's side.
Name: dlg_end_dlg
Parameters are:
dialog_id - this is an identifier of the dialog - it can be either (1) the unique ID of the dialog (as provided by dlg_list), either (2) the SIP Call-ID of the dialog.
extra_hdrs - (optional) string containg the extra headers (full format) to be added to the BYE requests.
The "dialog_id" value can be get via the "dlg_list" MI command.
MI FIFO Command Format:
# terminate the dialog via the internal Dialog-ID opensips-cli -x mi dlg_end_dlg 6ae.4b38d013 # terminate the dialog via its SIP Call-ID opensips-cli -x mi dlg_end_dlg Y2IwYjQ2YmE2ZDg5MWVkNDNkZGIwZjAzNGM1ZDY
Returns the number of dialogs belonging to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - how many dialogs were inserted into the profile with a specific value. If not value is passed, only simply belonging of the dialog to the profile is checked. Note that the profile does not supports values, this will be silently discarded.
Name: profile_get_size
Parameters:
profile - name of the profile to get the value for.
value (optional)- string value to toughen the check;
MI FIFO Command Format:
opensips-cli -x mi profile_get_size inboundCalls
Lists all the dialogs belonging to a profile. If the profile supports values, the check can be reinforced to take into account a specific value - list only the dialogs that were inserted into the profile with that specific value. If not value is passed, all dialogs belonging to the profile will be listed. Note that the profile does not supports values, this will be silently discarded. Also, when using shared profiles using the CacheDB interface, this command will only display the local dialogs.
Name: profile_list_dlgs
Parameters:
profile - name of the profile to list the dialog for.
value (optional)- string value to toughen the check;
MI FIFO Command Format:
opensips-cli -x mi profile_list_dlgs inboundCalls
Lists all the values belonging to a profile along with their count. If the profile does not support values a total count will be returned. Note that this function does not work for shared profiles over the CacheDB interface.
Name: profile_get_values
Parameters:
profile - name of the profile to list the dialog for.
MI FIFO Command Format:
opensips-cli -x mi profile_get_values inboundCalls
Terminate all ongoing dialogs from a specified profile, on a single dialog it performs the same operations as the command dlg_end_dlg
Name: profile_end_dlgs
Parameters:
profile - name of the profile that will have its dialogs termianted
value - (optional) if the profile supports values terminate only the dialogs with the specified value
MI FIFO Command Format:
opensips-cli -x mi profile_end_dlgs inboundCalls
Will load all the information about the dialogs from the database in the OpenSIPS internal memory. If a dialog is already found in memory and has the same/an older state, it will be updated with the values from DB. Otherwise, the newer in-memory version will not be changed.
Name: dlg_db_sync
It takes no parameters
MI FIFO Command Format:
opensips-cli -x mi dlg_db_sync
This command will only take effect if dialog replication is enabled.
Fully synchronize the dialog information in memory from a suitable donor node within the dialog_replication_cluster. Dialogs that already exist in memory which are not reconfirmed through syncing will be discarded. A sharing tag can be specified in order to sync only dialogs marked with that sharing tag.
Name: dlg_cluster_sync
Parameters:
sharing_tag - name of the sharing tag that dialogs have to be marked with in order to be synced
MI FIFO Command Format:
opensips-cli -x mi dlg_cluster_sync vip1
Restores the dialog table after a potential desynchronization event. The table is truncated, then populated with CONFIRMED dialogs from memory.
Name: dlg_restore_db
It takes no parameters
MI FIFO Command Format:
opensips-cli -x mi dlg_restore_db
Lists all the dialog profiles, along with 1 or 0 if the given profile has/does not have an associated value.
Name: list_all_profiles
Parameters: It takes no parameters
MI FIFO Command Format:
opensips-cli -x mi list_all_profiles
Push or update a dialog value for the given list of dialog IDs / Call-IDs.
Name: dlg_push_var
Parameters: It takes 3 or more parameters
dlg_val_name - name of the dialog value that needs to be inserted/updated
dlg_val_value - value to be inserted/updated
DID - dialog identifier. Can be either the $DLG_did or the actual Call-ID.
MI FIFO Command Format:
opensips-cli -x mi dlg_push_var var_name var_value DID1 [ DID2 DID3 ... DIDN ]
Sends a sequential request within an ongoing dialog.
Name: dlg_send_sequential
Parameters:
callid - the callid of the dialog you need to trigger the sequential message for.
method - (optional) the method used for the sequential message. Default value is INVITE.
mode - (optional) can be used to tune the behavior of the sequential message. Possible values for the mode are:
caller - (default) sends the sequential message to the caller. This mode can be useful in high availability scenarios when you want to update the upstream's routing set, specifically the contact.
callee - same as caller, but sends the sequential message to the callee.
challenge - sends a sequential INVITE (or UPDATE) to the caller to challenge it for its advertised SDP body. When the body is received, it is forwarded to the callee. This mode is useful when trying to change both endpoints (upstream and downstream) routing set. It can also be useful when trying to trigger a re-negotiation for SDP body.
challenge-caller - same as challenge
challenge-callee - same as challenge-caller, only that it first challenges the callee, instead of the caller.
body - (optional) can be used to specify a body for the initial sequential message. Possible values for the body parameter are:
none - (default) no body added to the sequential message.
inbound - advertises in the body of the sequential message generated the last body received from its pair. For example, if the mode=challenge-caller, the message will contain the body sent to OpenSIPS by the callee. This is useful when you need to alter the body previously sent to the caller, because you want to re-negotiate a different media proxy for the call. This can be achieved by catching the generated request in local_route, and re-engage the Media proxy.
outbound - advertises in the body of the sequential message generated the last body sent to that UAC. For example, if the mode=challenge-caller, the message will contain the last body sent by OpenSIPS to the caller. This is useful in a high availability scenario when trying to re-negotiate the contact of the server, but there is no need to alter the body sent earlier.
custom:CONTENT_TYPE:BODY - this can be used to specify a specific Content-Type ehader and body for the sequential message generated.
This functions runs asynchronously and returns the status code and reason of the last reply received for either the challenge or normal mode.
MI Command Format:
opensips-cli -x mi dlg_send_sequential \ callid=5291231-testing@127.0.0.1
MI Command used to trigger media re-negotiation:
opensips-cli -x mi dlg_send_sequential \ callid=5291231-testing@127.0.0.1 \ mode=challenge \ body=inbound
MI Command used to UPDATE the callee's remote Contact after a server failover:
opensips-cli -x mi dlg_send_sequential \ callid=5291231-testing@127.0.0.1 \ mode=challenge-callee \ body=outbound \ method=UPDATE
Returns the status of the dialog corresponding to the processed sequential request. This PV will be available only for sequential requests, after doing loose_route().
Value may be:
NULL - Dialog not found.
1 - Dialog unconfirmed (created but no reply received at all)
2 - Dialog in early state (created provisional reply received, but no final reply received yet)
3 - Confirmed by a final reply but no ACK received yet.
4 - Confirmed by a final reply and ACK received.
5 - Dialog ended.
Returns the duration (in seconds) of the dialog corresponding to the processed sequential request. The duration is calculated from the dialog confirmation and the current moment. This PV will be available only for sequential requests, after doing loose_route().
NULL will be returned if there is no dialog for the request.
Returns the dialog flags array (as a single integer value) of the dialog corresponding to the processed sequential request. This PV will be available only for sequential requests, after doing loose_route().
NULL will be returned if there is no dialog for the request.
Returns the direction of the request in dialog (as "upstream" string if the request is generated by callee or "downstream" string if the request is generated by caller) - to be used for sequential request. This PV will be available only for sequential requests (not for replies), after doing loose_route().
NULL will be returned if there is no dialog for the request.
Returns the id of the dialog corresponding to the processed sequential request. The output format is a string identical to the one returned by the dlg_list MI function. This PV will be available only for sequential requests, after doing loose_route().
NULL will be returned if there is no dialog for the request.
Returns the reason for the dialog termination. It can be one of the following :
Upstream BYE - Callee has sent a BYE
Downstream BYE - Caller has sent a BYE
Lifetime Timeout - Dialog lifetime expired
MI Termination - Dialog ended via the MI interface
Ping Timeout - Dialog ended because no reply to option pings
ReINVITE Ping Timeout - Dialog ended because no reply to reinvite pings
RTPProxy Timeout - Media timeout signaled by RTPProxy
SIP Race Condition - SIP Race Condition occurred
NULL will be returned if there is no dialog for the request, or if the dialog is not ended in the current context.
Used to set the dialog lifetime (in seconds). When read, the variable returns the number of seconds until the dialog expires and is destroyed. Note that reading the variable is only possible after the dialog is created (for initial requests) or after doing loose_route() (for sequential requests). Important notice: using this variable with a REALTIME db_mode is very inefficient, because every time the dialog value is changed, a database update is done.
NULL will be returned if there is no dialog for the request, otherwise the number of seconds until the dialog expiration.
The variable is read-only and exposes a JSON variable containing all the information that the dlg_list MI function contains
NULL will be returned if there is no dialog for the request, otherwise the JSON will be returned.
The variable is read-only and exposes a JSON variable containing all the information that the dlg_list_ctx MI function contains ( on top of $DLG_json, this will expose the full list of dialog vars and profile links for the current dialog )
NULL will be returned if there is no dialog for the request, otherwise the JSON will be returned.
This event is raised when the dialog state is changed.
Parameters:
id - the hex representation of the dialog id.
db_id - the integer representation of the dialog id, as it is stored in the database dlg_id field.
callid - the callid.
from_tag - the From tag.
to_tag - the To tag.
old_state - the old state of the dialog.
new_state - the new state of the dialog.
Register a new callback to the dialog.
Meaning of the parameters is as follows:
struct dlg_cell* dlg - dialog to register callback to. If maybe NULL only for DLG_CREATED callback type, which is not a per dialog type.
int type - types of callbacks; more types may be register for the same callback function; only DLG_CREATED must be register alone. Possible types:
DLGCB_LOADED - called when a dialog is loaded from the database, or received by a node using the cluster replication.
DLGCB_SAVED
DLG_CREATED - called when a new dialog is created - it's a global type (not associated to any dialog)
DLG_FAILED - called when the dialog was negatively replied (non-2xx) - it's a per dialog type.
DLG_CONFIRMED - called when the dialog is confirmed (2xx replied) - it's a per dialog type.
DLG_REQ_WITHIN - called when the dialog matches a sequential request - it's a per dialog type.
DLG_TERMINATED - called when the dialog is terminated via BYE, or by the mi dlg_end_dlg command - it's a per dialog type.
DLG_EXPIRED - called when the dialog expires without receiving a BYE - it's a per dialog type. Note that when using replication sharing tags, this callback is only executed by the node that has the Active tag.
DLGCB_EARLY - called when the dialog is created in an early state (18x replied) - it's a per dialog type.
DLGCB_RESPONSE_FWDED - called when the dialog matches a reply to the initial INVITE request - it's a per dialog type.
DLGCB_RESPONSE_WITHIN - called when the dialog matches a reply to a subsequent in dialog request - it's a per dialog type.
DLGCB_MI_CONTEXT - called when the mi dlg_list_ctx command is invoked - it's a per dialog type.
DLGCB_DESTROY
dialog_cb cb - callback function to be called. Prototype is: “void (dialog_cb) (struct dlg_cell* dlg, int type, struct dlg_cb_params * params); ”
void *param - parameter to be passed to the callback function.
param_free callback_param_free - callback function to be called to free the param. Prototype is: “void (param_free_cb) (void *param);”
3.1. | What happened with “topology_hiding()” function? |
The respective functionality was moved into the topology_hiding module. Function prototype has remained the same. | |
3.2. | What happened with “use_tight_match” parameter? |
The parameter was removed with version 1.3 as the option of tight matching became mandatory and not configurable. Now, the tight matching is done all the time (when using DID matching). | |
3.3. | What happened with “bye_on_timeout_flag” parameter? |
The parameter was removed in a dialog module parameter restructuring. To keep the bye on timeout behavior, you need to provide a "B" string parameter to the create_dialog() function. | |
3.4. | What happened with “dlg_flag” parameter? |
The parameter is considered obsolete. The only way to create a dialog is to call the create_dialog() function | |
3.5. | Where can I find more about OpenSIPS? |
Take a look at https://opensips.org/. | |
3.6. | Where can I post a question about this module? |
First at all check if your question was already answered on one of our mailing lists:
E-mails regarding any stable OpenSIPS release should be sent to
If you want to keep the mail private, send it to
| |
3.7. | How can I report a bug? |
Please follow the guidelines provided at: https://github.com/OpenSIPS/opensips/issues. |
Table 4.1. Top contributors by DevScore(1), authored commits(2) and lines added/removed(3)
| Name | DevScore | Commits | Lines ++ | Lines -- | |
|---|---|---|---|---|---|
| 1. | Bogdan-Andrei Iancu (@bogdan-iancu) | 445 | 283 | 12862 | 3441 |
| 2. | Razvan Crainea (@razvancrainea) | 271 | 203 | 5072 | 1537 |
| 3. | Vlad Paiu (@vladpaiu) | 253 | 144 | 7205 | 3026 |
| 4. | Vlad Patrascu (@rvlad-patrascu) | 184 | 98 | 3830 | 3265 |
| 5. | Liviu Chircu (@liviuchircu) | 167 | 122 | 2886 | 1239 |
| 6. | Ovidiu Sas (@ovidiusas) | 33 | 24 | 631 | 149 |
| 7. | Dan Pascu (@danpascu) | 30 | 25 | 233 | 179 |
| 8. | Eseanu Marius Cristian (@eseanucristian) | 18 | 6 | 722 | 341 |
| 9. | Daniel-Constantin Mierla (@miconda) | 16 | 13 | 76 | 66 |
| 10. | Henning Westerholt (@henningw) | 16 | 10 | 172 | 187 |
All remaining contributors: Anca Vamanu, Ionut Ionita (@ionutrazvanionita), Walter Doekes (@wdoekes), Ionel Cerghit (@ionel-cerghit), Andrei Dragus, Maksym Sobolyev (@sobomax), John Riordan, Hugues Mitonneau, Carsten Bock, Jerome Martin, Klaus Darilion, Jarrod Baumann (@jarrodb), Nick Altmann (@nikbyte), Zero King (@l2dy), Michel Bensoussan, Richard Revels, Elena-Ramona Modroiu, Tavis Paquette, Andrei Datcu (@andrei-datcu), Jeffrey Magder, Ron Winacott, Andy Pyles, Julián Moreno Patiño, Konstantin Bokarius, sergei lavrov, Alex Massover, Damien Sandras (@dsandras), Alex Hermann, Dusan Klinec (@ph4r05), Norman Brandinger (@NormB), Peter Lemenkov (@lemenkov), UnixDev, Eliot Gable, Ryan Bullock (@rrb3942), Edson Gellert Schubert.
(1) DevScore = author_commits + author_lines_added / (project_lines_added / project_commits) + author_lines_deleted / (project_lines_deleted / project_commits)
(2) including any documentation-related commits, excluding merge commits. Regarding imported patches/code, we do our best to count the work on behalf of the proper owner, as per the "fix_authors" and "mod_renames" arrays in opensips/doc/build-contrib.sh. If you identify any patches/commits which do not get properly attributed to you, please submit a pull request which extends "fix_authors" and/or "mod_renames".
(3) ignoring whitespace edits, renamed files and auto-generated files
Table 4.2. Most recently active contributors(1) to this module
| Name | Commit Activity | |
|---|---|---|
| 1. | Liviu Chircu (@liviuchircu) | Aug 2012 - May 2024 |
| 2. | Razvan Crainea (@razvancrainea) | Aug 2010 - Jan 2024 |
| 3. | Bogdan-Andrei Iancu (@bogdan-iancu) | Apr 2006 - Dec 2023 |
| 4. | Ovidiu Sas (@ovidiusas) | Feb 2008 - Jun 2023 |
| 5. | Vlad Patrascu (@rvlad-patrascu) | Jul 2016 - Jul 2022 |
| 6. | Vlad Paiu (@vladpaiu) | Oct 2010 - Nov 2021 |
| 7. | Nick Altmann (@nikbyte) | Oct 2013 - May 2021 |
| 8. | Walter Doekes (@wdoekes) | Apr 2010 - Apr 2021 |
| 9. | Maksym Sobolyev (@sobomax) | Nov 2020 - Jan 2021 |
| 10. | sergei lavrov | Dec 2020 - Dec 2020 |
All remaining contributors: Zero King (@l2dy), Dan Pascu (@danpascu), Peter Lemenkov (@lemenkov), Ionel Cerghit (@ionel-cerghit), Jarrod Baumann (@jarrodb), Ionut Ionita (@ionutrazvanionita), Julián Moreno Patiño, Dusan Klinec (@ph4r05), Eseanu Marius Cristian (@eseanucristian), Andrei Datcu (@andrei-datcu), Norman Brandinger (@NormB), Damien Sandras (@dsandras), Ryan Bullock (@rrb3942), Anca Vamanu, Alex Massover, Andrei Dragus, John Riordan, Hugues Mitonneau, Richard Revels, UnixDev, Alex Hermann, Henning Westerholt (@henningw), Carsten Bock, Klaus Darilion, Daniel-Constantin Mierla (@miconda), Konstantin Bokarius, Edson Gellert Schubert, Jerome Martin, Tavis Paquette, Michel Bensoussan, Eliot Gable, Andy Pyles, Elena-Ramona Modroiu, Jeffrey Magder, Ron Winacott.
(1) including any documentation-related commits, excluding merge commits
Last edited by: Bogdan-Andrei Iancu (@bogdan-iancu), Liviu Chircu (@liviuchircu), Vlad Patrascu (@rvlad-patrascu), Razvan Crainea (@razvancrainea), Vlad Paiu (@vladpaiu), Zero King (@l2dy), Dan Pascu (@danpascu), Peter Lemenkov (@lemenkov), Julián Moreno Patiño, Ionut Ionita (@ionutrazvanionita), Ionel Cerghit (@ionel-cerghit), Walter Doekes (@wdoekes), Eseanu Marius Cristian (@eseanucristian), Norman Brandinger (@NormB), Anca Vamanu, Andrei Dragus, Hugues Mitonneau, Klaus Darilion, Henning Westerholt (@henningw), Ovidiu Sas (@ovidiusas), Daniel-Constantin Mierla (@miconda), Konstantin Bokarius, Edson Gellert Schubert, Michel Bensoussan, Andy Pyles, Elena-Ramona Modroiu.
Documentation Copyrights:
Copyright © 2006-2009 Voice Sistem SRL