[OpenSIPS-Users] Opensips CP DROUTING GATEWAY enable/disable issue

[Bogdan-Andrei Iancu]

Jeff,

To have the CP connecting to OpenSIPS you can use any of the MI backends 
- FIFO, XMLRPC, UDP...any will do the trick. The downside of FIFO is 
that the CP and OpenSIPS must be on the same server.

Regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com

On 09.06.2016 17:38, Jeff Wilkie wrote:
> Is XMLRPC required to make this function work?  Currently, we are only 
> using the fifo method as the boxes.global.inc.php only referencing 
> this method.  The documentation for CP says to use one or the other 
> but does not mention that some functions will not work if not using 
> XMLRPC.
>
> Thanks
> Jeff
>
> Jeff Wilkie
> Chief Technology Officer
> US IP Communications
> 919.297.1057
>
>
> /"This e-mail communication and any attachments may contain 
> confidential and privileged information and is for use by the 
> designated addressee(s) named above only. Any files transmitted with 
> it are confidential and intended solely for the use of the individual 
> to whom it is addressed. Any views or opinions presented are solely 
> those of the author and do not necessarily represent those of USIPCOM, 
> LLC. If you are not the intended addressee, you are hereby notified 
> that you have received this communication in error and that any use or 
> reproduction of this email or its contents is strictly prohibited and 
> may be unlawful. If you have received this communication in error, 
> please notify us immediately by replying to this message and deleting 
> it from your computer. Thank you". /
>
> On Tue, Jun 7, 2016 at 6:52 AM, Bogdan-Andrei Iancu 
> <bogdan at opensips.org <mailto:bogdan at opensips.org>> wrote:
>
>     Hi Jeff,
>
>     So, FIFO works ok for you, but CP (using xmlrpc fails). Can you
>     make a capture of the XMLRPC traffic between CP and OpenSIPS and
>     post it somewhere ?
>
>     Regards,
>
>     Bogdan-Andrei Iancu
>     OpenSIPS Founder and Developer
>     http://www.opensips-solutions.com
>
>     On 31.05.2016 17:27, Jeff Wilkie wrote:
>>
>>     OpenSIPS Control Panel version 5.0
>>
>>
>>     Jeff Wilkie
>>     Chief Technology Officer
>>     US IP Communications
>>     919.297.1057 <tel:919.297.1057>
>>
>>
>>     /"This e-mail communication and any attachments may contain
>>     confidential and privileged information and is for use by the
>>     designated addressee(s) named above only. Any files transmitted
>>     with it are confidential and intended solely for the use of the
>>     individual to whom it is addressed. Any views or opinions
>>     presented are solely those of the author and do not necessarily
>>     represent those of USIPCOM, LLC. If you are not the intended
>>     addressee, you are hereby notified that you have received this
>>     communication in error and that any use or reproduction of this
>>     email or its contents is strictly prohibited and may be unlawful.
>>     If you have received this communication in error, please notify
>>     us immediately by replying to this message and deleting it from
>>     your computer. Thank you". /
>>
>>     On Tue, May 31, 2016 at 3:28 AM, Bogdan-Andrei Iancu
>>     <bogdan at opensips.org <mailto:bogdan at opensips.org>> wrote:
>>
>>         Hi Jeff,
>>
>>         What OpenSIPS Control Panel version are you using ?
>>
>>         Regards,
>>
>>         Bogdan-Andrei Iancu
>>         OpenSIPS Founder and Developer
>>         http://www.opensips-solutions.com
>>
>>         On 21.05.2016 00:15, Jeff Wilkie wrote:
>>>         OPENSIPS 1.10.x
>>>         I have the following set
>>>
>>>         opensips.cfg
>>>
>>>         #### FIFO Management Interface
>>>
>>>         loadmodule "mi_fifo.so"
>>>
>>>         modparam("mi_fifo", "fifo_name", "/tmp/opensips_proxy_fifo")
>>>
>>>         modparam("mi_fifo", "fifo_mode", 0666)
>>>
>>>
>>>         opensipsctlrc
>>>
>>>         ## path to FIFO file
>>>
>>>         OSIPS_FIFO="/tmp/opensips_proxy_fifo"
>>>
>>>
>>>         Attempting to disable gateways via the CP gives the
>>>         following errors:
>>>
>>>
>>>         From DROUTING-Gateway interface:
>>>
>>>
>>>         Error while disabling gateway 2
>>>         (the GWID is 2 for the gateway I'm attempting to disable)
>>>
>>>         From the MI Commands:
>>>         Initiating the following command: *dr_gw_status 2 0*
>>>         404 GW ID not found
>>>
>>>         From the DROUTING-Gateway interface I am able to enable the
>>>         interface if it is disabled
>>>         I'm able to also enable the Gateway from the MI Commands
>>>         section.
>>>
>>>         I'm also able to enable and disable the Gateway using
>>>         opensipsctl fifo commands
>>>
>>>         opensipsctl fifo dr_gw_status 2
>>>
>>>         Enabled:: yes
>>>
>>>         opensipsctl fifo dr_gw_status 2 0
>>>
>>>         opensipsctl fifo dr_gw_status 2
>>>
>>>         Enabled:: no
>>>
>>>         opensipsctl fifo dr_gw_status 2 1
>>>
>>>         opensipsctl fifo dr_gw_status 2
>>>
>>>         Enabled:: yes
>>>
>>>
>>>         Not sure where the problem is but I feel its somewhere in
>>>         the syntax of how its delivered.  I'm sure it's something
>>>         easy I've overlooked.  Any help on this?
>>>
>>>         Thanks
>>>         Jeff
>>>
>>>
>>>         _______________________________________________
>>>         Users mailing list
>>>         Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>>>         http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20160609/d9ffe2cd/attachment-0001.htm>