[OpenSIPS-Users] osipsconsole address failed

Mimi Cafe mimicafe at gmail.com
Wed Dec 12 12:37:02 CET 2012


Thanks for your input. It explains why I  couldn't add the new gateway 
earlier on. it now worked fine with 24 bit mask.

I'm running version 1.8  (sorry I forgit to mention it), and osipconsole 
and osipconsolerc are installed in the paths below.

-rwxr-xr-x. 1 opensips opensips 202930 Dec 11 20:33 
/usr/local/opensips_proxy/sbin/osipsconsole
-rw-r--r--. 1 opensips opensips 2978 Dec  8 20:21 
/usr/local/opensips_proxy/etc/opensips/osipsconsolerc

Looking in osipsconsole again, I now realise $PATH_CTLRC = "./scripts/" 
could be the reason why the config script is not found. Is this the case?


Cheers

Mimi


On 12/12/2012 10:37, Bogdan-Andrei Iancu wrote:
> Hi Mimi,
>
> starting with 1.7 (if I remember correctly), the address mask is not 
> anymore as 255.255.255.0, but as length 24 (number of bites). So, the 
> osipsconsole works the same now.
>
> Simply do: osipsconsole address add 0 192.168.1.192 24 5060 UDP
>
>
> Regarrding the DB issue - do you use osipsconsole from the source tree 
> or installed ? if installed, what is the path of osipsconsole and what 
> is the path of osipsconsolerc ? BTW, what version of opensips are you 
> using ?
>
> Regards,
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developer
> http://www.opensips-solutions.com
>
> On 12/11/2012 11:17 PM, Mimi Cafe wrote:
>> Hi
>>
>> I have updated osipsconsole via svn and it appears the previous issue 
>> is resolved, but I now see two more issues.
>>
>> The mattern below does not match the dot in netmask $cmd[4] !~ 
>> /^[0-9]+$/. This seem to look for only one octet?
>>
>> if ( $cmd[4] !~ /^[0-9]+$/ || $cmd[4] < 0 || $cmd[4] > 32 ) {
>>                                 print "mask '$cmd[4]' is not valid - 
>> it must be between 0 and 32 (biti)\n";
>>                                 return;
>>                         }
>>
>>
>> The resulting error is:
>>
>> Control engine FIFO loaded
>> Used database is mysql
>> Warn fallback to local workdir ./mysql
>> mask '255.255.255.255' is not valid - it must be between 0 and 32 (biti)
>> [sbin]$ sudo ./osipsconsole address add 0 192.168.1.192 255.255.255.0 
>> 5060 UDP
>> which: no md5 in (/sbin:/bin:/usr/sbin:/usr/bin)
>> Control engine FIFO loaded
>> Used database is mysql
>> Warn fallback to local workdir ./mysql
>> mask '255.255.255.0' is not valid - it must be between 0 and 32 (biti)
>>
>>
>> The other (trivial) issue is that osipsconsole does not use the 
>> database parameters specified in my osicpsconsolerc. Instead, it 
>> attempts to use detail values here.
>>
>> [sbin]$ sudo ./osipsconsole address add 0 192.168.1.192 
>> 255.255.255.255 5060 UDP
>> which: no md5 in (/sbin:/bin:/usr/sbin:/usr/bin)
>> which: no db4.4_dump in (/sbin:/bin:/usr/sbin:/usr/bin)
>> Control engine FIFO loaded
>> Used database is mysql
>> Warn fallback to local workdir ./mysql
>> Failed to connect the configured Database 
>> (database=opensips;host=localhost;user=opensips)[babs at mognoreborder 
>> sbin]$ sudo vim osipsconsole
>>
>> Mimi
>>
>>
>> On 10/12/2012 14:38, Bogdan-Andrei Iancu wrote:
>>> Hi Mimi,
>>>
>>> I made some fixes in osipsconsole on SVN (trunk and 1.8 branch) - 
>>> please update and let me know if now works for you.
>>>
>>> Regards,
>>>
>>> Bogdan-Andrei Iancu
>>> OpenSIPS Founder and Developer
>>> http://www.opensips-solutions.com
>>>
>>>
>>> On 12/08/2012 11:00 PM, Mimi Cafe wrote:
>>>> I attempted using osipsconsole to add a gateway address, but it 
>>>> failed because there is no data in the dbaliases table. How is this 
>>>> linked to the dbaliases tables? What is the prerequisite to adding 
>>>> a gateway address in addresses table?
>>>>
>>>> osipsconsole address add 0 192.168.18.89 255.255.255.255 5060 UDP
>>>>
>>>> Control engine FIFO loaded
>>>> Used database is mysql
>>>> Retrieving data from table failedYou have an error in your SQL 
>>>> syntax; check the manual that corresponds to your MySQL server 
>>>> version for the right syntax to use near 'WHERE ip='192.168.18.89'' 
>>>> at line 1
>>>> Introducing the address rule 0 192.168.18.89 255.255.255.255 5060 
>>>> UDP to the database failed
>>>> You have an error in your SQL syntax; check the manual that 
>>>> corresponds to your MySQL server version for the right syntax to 
>>>> use near '( grp, ip, mask, port, proto , context_info ) VALUES ( 0, 
>>>> '192.168.18.89', '255.' at line 1
>>>>
>>>>
>>>> Mimi
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20121212/7f91d3b4/attachment-0001.htm>


More information about the Users mailing list