[OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK response under high load

Ali Pey alipey at gmail.com
Fri Aug 10 18:30:20 CEST 2012


I can't think of anything else.

Dear opensips team,

Hope you had a good flight-terminator :)
Can you take a look at this please?

Thanks,
Ali Pey


On Fri, Aug 10, 2012 at 12:05 PM, Diego Barberio <
diego.barberio at redmondsoftware.com> wrote:

> Hi Ali,****
>
> ** **
>
> Thanks again for rour feedbak.****
>
> Unfortunately that’s not the case. I’m attaching an example with the same
> Via that works perfectly.****
>
> ** **
>
> Also, opensips works perfectly all day and only stops sending some OKs
> during peak hour.****
>
> ** **
>
> Do you have any other idea?****
>
> ** **
>
> Thanks****
>
> Diego****
>
> ** **
>
> *From:* users-bounces at lists.opensips.org [mailto:
> users-bounces at lists.opensips.org] *On Behalf Of *Ali Pey
> *Sent:* viernes, 10 de agosto de 2012 11:00 a.m.
>
> *To:* OpenSIPS users mailling list
> *Subject:* Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK
> response under high load****
>
> ** **
>
> Hi Diego,****
>
> ** **
>
> I looked at your pcap file and I see that your second via has this:****
>
> BC01.MBCSCR4.MSS.IMS.TIGO.COM.GT****
>
> ** **
>
> Is this a valid address? Maybe opensips can not resolve it so it ignores
> the via. Have you tried adding it to /etc/hosts. ****
>
> ** **
>
> Compare a good 200OK with one of these and see if there is any difference.
> ****
>
> ** **
>
> Regards,****
>
> Ali Pey****
>
> On Fri, Aug 10, 2012 at 9:20 AM, Diego Barberio <
> diego.barberio at redmondsoftware.com> wrote:****
>
> Hi Ali,****
>
>  ****
>
> I removed set the debug flag to 0 and added the “–“ before the file path,
> and I sill have the same issue.****
>
> Is there any other thing I can try?****
>
>  ****
>
> Thanks****
>
> Diego****
>
>  ****
>
> *From:* users-bounces at lists.opensips.org [mailto:
> users-bounces at lists.opensips.org] *On Behalf Of *Ali Pey
> *Sent:* jueves, 09 de agosto de 2012 03:30 p.m.
> *To:* OpenSIPS users mailling list
> *Subject:* Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK
> response under high load****
>
>  ****
>
> Hi Diego,****
>
>  ****
>
> Have you tried disabling the logging? That's usually the problem. Syslog
> slows down opensips.****
>
>  ****
>
> Also in /etc/syslog.conf as '-' before the file path to make
> it asynchronous. ****
>
>  ****
>
> Regards,****
>
> Ali Pey****
>
>  ****
>
> On Thu, Aug 9, 2012 at 2:19 PM, Diego Barberio <
> diego.barberio at redmondsoftware.com> wrote:****
>
> Hello,
>
> I'm using opensips to forward incoming INVITEs to a set of 8 applications.
> I'm using dispatcher module to achieve this.
> During peak hour, opensips receives about 350 INVITEs per second, during
> this period about 30 OK responses per second my application sends correctly
> aren't forwarded by opensips.
>
> I've recompiled opensips so it can use more memory by modifing the config.h
> file:
>
> #define PKG_MEM_POOL_SIZE 10*1024*1024          /*!< Used only if
> PKG_MALLOC
> is defined*/
> #define SHM_MEM_SIZE 320                        /*!< Used if SH_MEM is
> defined*/
>
>
> The incoming INVITEs come from UDP and TCP.
>
>
> For each of the OK responses that aren't forwarded this entry appears in
> the
> messages file:
>
> usr/local/sbin/opensips[24554]: ERROR:core:forward_reply: no 2nd via found
> in reply
>
> According to my research on the web this message means that the OK only has
> one Via header, however this is not the case and the capture attached (made
> on server which runs opensips) shows it.
>
> I've also tried to increase the log level, but it made opensips to work
> slow
> even in low traffic hours.
>
>
> I run some test in my lab and opensips worked perfectly even under more
> than
> 350 INVITES per second, this problem only occurs in production
>
> I really don't know what else to do.
> Could you help me to fix this issue or at least move on with the
> investigation?
>
> Thanks
> Diego
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users****
>
>  ****
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users****
>
> ** **
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20120810/4119791e/attachment.htm>


More information about the Users mailing list