[OpenSIPS-Users] Request time out for (SUBSCRIBE + PUBLISH) in IMS+presence Server

abid khan abidkhan135 at gmail.com
Wed Feb 23 14:54:54 CET 2011


-----------------
                                                   *    <<Opensips.cfg>>*
#
# $Id: opensips.cfg 7027 2010-07-15 13:48:29Z razvancrainea $
#
# OpenSIPS basic configuration script
#     by Anca Vamanu <anca at voice-system.ro>
#
# Please refer to the Core CookBook at:
#      http://www.opensips.org/index.php?n=Resources.DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#


####### Global Parameters #########

debug=3
log_stderror=yes
log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes

/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes

/* uncomment the next line to enable the auto temporary blacklisting of
   not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns
   lookup failures (default disabled) */
#dns_try_ipv6=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on revers DNS on IPs (default on) */
#auto_aliases=no

/* uncomment the following lines to enable TLS support  (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"


port=5065

/* uncomment and configure the following line if you want opensips to
   bind on a specific interface/port/proto (default bind on all available)
*/
listen=udp:127.0.0.1:5065


####### Modules Section ########

#set module path
#mpath="../modules/"
mpath="/usr/local/lib/opensips/modules/"

/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri.so"
loadmodule "acc.so"
/* uncomment next lines for MySQL based authentication support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
   NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
   NOTE: a DB (like db_mysql) module must be also loaded
   NOTE: be sure and enable multi-domain support in all used modules
         (see "multi-module params" section ) */
loadmodule "domain.so"
/* uncomment the next two lines for presence server support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "presence_mwi.so"  #chk1
loadmodule "pua.so"          #chk2


# ----------------- setting module-specific parameters ---------------


# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")


# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)


# ----- registrar params -----
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "method_filtering", 1)   #chk
#modparam("registrar", "max_contacts", 10)


# ----- usrloc params -----
modparam("usrloc", "db_mode",   0)
/* uncomment the following lines if you want to enable DB persistency
   for location entries */
modparam("usrloc", "db_mode",   2)
modparam("usrloc", "db_url",
    "mysql://opensips:opensipsrw@localhost/opensips")


# ----- uri params -----
modparam("uri", "use_uri_table", 0)


# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)


# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
   authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
    "mysql://opensips:opensipsrw@localhost/opensips")
modparam("auth_db", "load_credentials", "")


# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
   aliases */
#modparam("alias_db", "db_url",
#    "mysql://opensips:opensipsrw@localhost/opensips")


# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
   support */
#modparam("domain", "db_url",
#    "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("domain", "db_mode", 1)   # Use caching


# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
   in the modules (dafault off) */
#modparam("auth_db|usrloc|uri", "use_domain", 1)


# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
modparam("presence|presence_xml", "db_url",
    "mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address", "sip:127.0.0.1:5065")


####### Routing Logic ########


# main request routing logic

route{

    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        exit;
    }

    if (has_totag()) {
        # sequential request withing a dialog should
        # take the path determined by record-routing
        if (loose_route()) {
            if (is_method("BYE")) {
                setflag(1); # do accounting ...
                setflag(3); # ... even if the transaction fails
            } else if (is_method("INVITE")) {
                # even if in most of the cases is useless, do RR for
                # re-INVITEs alos, as some buggy clients do change route set
                # during the dialog.
                record_route();
            }
            # route it out to whatever destination was set by loose_route()
            # in $du (destination URI).
            route(1);
        } else {
            /* uncomment the following lines if you want to enable presence
*/
            if (is_method("SUBSCRIBE") && $rd == "127.0.0.1") {
                # in-dialog subscribe requests
                route(2);
                exit;
            }
            if ( is_method("ACK") ) {
                if ( t_check_trans() ) {
                    # non loose-route, but stateful ACK; must be an ACK
after
                    # a 487 or e.g. 404 from upstream server
                    t_relay();
                    exit;
                } else {
                    # ACK without matching transaction ->
                    # ignore and discard
                    exit;
                }
            }
            sl_send_reply("404","Not here");
        }
        exit;
    }

    #initial requests

    # CANCEL processing
    if (is_method("CANCEL"))
    {
        if (t_check_trans())
            t_relay();
        exit;
    }

    t_check_trans();

    # authenticate if from local subscriber (uncomment to enable auth)
    # authenticate all initial non-REGISTER request that pretend to be
    # generated by local subscriber (domain from FROM URI is local)
    if (!(method=="REGISTER") && from_uri==myself) /*no multidomain
version*/
    if (!(method=="REGISTER") && is_from_local())  /*multidomain version*/
    {
        if (!proxy_authorize("open-ims.test", "subscriber")) {
            proxy_challenge("open-ims.test", "0");
            exit;
        }
        if (!db_check_from()) {
            sl_send_reply("403","Forbidden auth ID");
            exit;
        }

        consume_credentials();
        # caller authenticated
    }

    # preloaded route checking
    #if (loose_route()) {
    #    xlog("L_ERR",
    #    "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
    #    if (!is_method("ACK"))
    #        sl_send_reply("403","Preload Route denied");
    #    exit;
    #}

    # record routing
    if (!is_method("REGISTER|MESSAGE"))
        record_route();

    # account only INVITEs
    if (is_method("INVITE")) {
        setflag(1); # do accounting
    }
    if (!uri==myself)
    ## replace with following line if multi-domain support is used
    ##if (!is_uri_host_local())
    {
        append_hf("P-hint: outbound\r\n");
        # if you have some interdomain connections via TLS
        ##if($rd=="tls_domain1.net") {
        ##    t_relay("tls:domain1.net");
        ##    exit;
        ##} else if($rd=="tls_domain2.net") {
        ##    t_relay("tls:domain2.net");
        ##    exit;
        ##}
        route(1);
    }

    # requests for my domain

    ## uncomment this if you want to enable presence server
    ##   and comment the next 'if' block
    ##   NOTE: uncomment also the definition of route[2] from  below
    if( is_method("PUBLISH|SUBSCRIBE"))
            route(2);

    #if (is_method("PUBLISH"))
    #{
    #    sl_send_reply("503", "Service Unavailable");
    #    exit;
    #}


    if (is_method("REGISTER"))
    {
        # authenticate the REGISTER requests (uncomment to enable auth)
#        if (!www_authorize("open-ims.test", "subscriber"))
#        {
#            www_challenge("open-ims.test", "0");
#            exit;
#        }

        if (!db_check_to())
        {
            sl_send_reply("403","Forbidden auth ID");
            exit;
        }

        if (!save("location"))
            sl_reply_error();

        exit;
    }

    if ($rU==NULL) {
        # request with no Username in RURI
        sl_send_reply("484","Address Incomplete");
        exit;
    }

    # apply DB based aliases (uncomment to enable)
    ##alias_db_lookup("dbaliases");

    # do lookup with method filtering
    if (!lookup("location","m")) {
        switch ($retcode) {
            case -1:
            case -3:
                t_newtran();
                t_reply("404", "Not Found");
                exit;
            case -2:
                sl_send_reply("405", "Method Not Allowed");
                exit;
        }
    }

    # when routing via usrloc, log the missed calls also
    setflag(2);

    route(1);
}


route[1] {
    # for INVITEs enable some additional helper routes
    if (is_method("INVITE")) {
        t_on_branch("2");
        t_on_reply("2");
        t_on_failure("1");
    }

    if (!t_relay()) {
        sl_reply_error();
    };
    exit;
}


# Presence route
/* uncomment the whole following route for enabling presence
   NOTE: do not forget to enable the call of this route from the main
     route */
route[2]
{
    if (!t_newtran())
    {
        sl_reply_error();
        exit;
    };

    if(is_method("PUBLISH"))
    {
        handle_publish();
    }
    else
    if( is_method("SUBSCRIBE"))
    {
        handle_subscribe();
    }

    exit;
}


branch_route[2] {
    xlog("new branch at $ru\n");
}


onreply_route[2] {
    xlog("incoming reply\n");
}


failure_route[1] {
    if (t_was_cancelled()) {
        exit;
    }

    # uncomment the following lines if you want to block client
    # redirect based on 3xx replies.
    ##if (t_check_status("3[0-9][0-9]")) {
    ##t_reply("404","Not found");
    ##    exit;
    ##}

    # uncomment the following lines if you want to redirect the failed
    # calls to a different new destination
    ##if (t_check_status("486|408")) {
    ##    sethostport("192.168.2.100:5060");
    ##    # do not set the missed call flag again
    ##    t_relay();
    ##}
}


-- 
*Abid khan
NUST-SEECS BSIT
 *
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20110223/1717d4fe/attachment-0001.htm>


More information about the Users mailing list