[OpenSIPS-Users] 2 UAs behind same NAT Device

Duane Larson duane.larson at gmail.com
Tue Nov 2 15:19:42 CET 2010


Do a
ngrep -W byline -td any . port 5060

during the call call to see what's going on.

On Tue, Nov 2, 2010 at 7:25 AM, Deon Vermeulen <vermeulen.deon at gmail.com>wrote:

> Hi List
>
> I'm trying to setup NAT to NOT use MediaProxy when it detects that 2
> devices are behind the same NAT Device, but rather have coms go
> directly between them.
> At the moment I can dial between the 2 phones and answer the call.
> The callee phone says "Call Established" upon answer, but the caller
> phone still says "trying/connecting".
> I am sure this has something to do with my configuration, but I have
> "NO IDEA" where to start looking.
> The phones are setup to use their local IPs with no other STUN, ICE,
> or "proxy like" configurations.
> Below is a snipped from my opensips.cfg with the NAT configs and would
> really appreciate any help to get this working.
>
> modparam("rr", "enable_full_lr", 1)
> modparam("registrar", "received_avp", "$avp(i:42)")
> modparam("usrloc", "db_mode",   2)
> modparam("usrloc", "nat_bflag", 6)
> modparam("domain", "db_mode", 1) # Use caching
> modparam("auth_db|usrloc|uri|avpops", "use_domain", 1)
> modparam("auth_db|alias_db|domain|uri|uri_db|usrloc|permissions|
> siptrace|group|avpops|presence", "db_url", "mysql://
> opensips:opensipsrw at localhost/opensips")
> modparam("nathelper", "natping_interval", 10)
> modparam("nathelper", "received_avp", "$avp(i:42)")
> modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy-
> dispatcher.sock")
> modparam("mediaproxy", "mediaproxy_timeout", 500)
> modparam("mi_datagram", "socket_name", "/var/run/opensips/
> opensips.sock")
> modparam("mi_datagram", "children_count", 4)
>
>
> # -------------------------  request routing logic ------------------- #
>
> route{
>
>     #
>     # -- 1 -- Request Validation
>     #
>     if (!mf_process_maxfwd_header("10")) {
>         sl_send_reply("483","Too Many Hops");
>         exit;
>     }
>
>     if (msg:len >=  2048 ) {
>         sl_send_reply("513", "Message too big");
>         exit;
>     }
>
>     #
>     # -- 2 -- Routing Preprocessing
>     #
>     ## Record-route all except Register
>     ## Mark packets with nat=yes
>     ## This mark will be used to identify the request in the loose
>     ## route section
>     if(!is_method("REGISTER")){
>         if(nat_uac_test("19")){
>             record_route(";nat=yes");
>         } else {
>             record_route();
>         }
>     }
>
>     ##Loose_route packets
>     if (has_totag()) {
>         #sequential request withing a dialog should
>         # take the path determined by record-routing
>         if (loose_route()) {
>             #Check authentication of re-invites
>             if(method=="INVITE") {
>                 if (!proxy_authorize("","subscriber")) {
>                 proxy_challenge("","1");
>                 exit;
>             } else if (!db_check_from()) {
>                 sl_send_reply("403", "Forbidden, use From=ID");
>                 exit;
>             }
>         }
>                 ## BYE and CANCEL message handling
>         if(method=="BYE" || method=="CANCEL") {
>             end_media_session();
>         }
>         ##Detect requests in the dialog behind NAT and flag with 6
>             if(nat_uac_test("19") || search("^Route:.*;nat=yes")){
>                 append_hf("P-hint: LR|fixcontact,setflag6, mediaproxy
> \r\n");
>                 fix_contact();
>                 setbflag(6);
>                 use_media_proxy();
>             }
>             route(1);
>         } else {
>             sl_send_reply("404","Not here");
>         }
>         exit;
>     }
>
>     #CANCEL processing
>     if (is_method("CANCEL")) {
>         if (t_check_trans()) {
>             end_media_session();
>             t_relay();
>         }
>         exit;
>     }
>
>     t_check_trans();
>
>     #
>     # -- 3 -- Determine Request Target
>     #
>     if (method=="REGISTER") {
>         route(2);
>     } else {
>         route(3);
>     }
> }
>
>
> route[1] {
>     #
>     # -- 4 -- Forward request to target
>     #
>     # Forward statefully
>     t_on_reply("1");
>     t_on_failure("1");
>     if (!t_relay()) {
>         sl_reply_error();
>     }
>     exit;
> }
>
> route[2] {
>     ## Register request handler
>     if (is_uri_host_local()) {
>         if (!www_authorize("", "subscriber")) {
>             www_challenge("", "1");
>             exit;
>         }
>
>         if (!db_check_to()) {
>             sl_send_reply("403", "Forbidden");
>             exit;
>         }
>
>            # Test to see if Caller is behind NAT
>         if(!search("^Contact:[ ]*\*") && client_nat_test("7")) {
>             setbflag(6);
>             fix_nated_register();
>             force_rport();
>         }
>         save("location");
>         exit;
>
>     } else {
>         sl_send_reply("403", "Forbidden");
>     }
> }
>
>
> route[3] {
>     ## Requests handler
>     if (is_from_local()){
>         # From an internal domain -> check the credentials and the FROM
>         #if(!allow_trusted()){
>             if (!proxy_authorize("","subscriber")) {
>                 proxy_challenge("","0");
>                 exit;
>             } else if(!db_check_from()) {
>             sl_send_reply("403", "Forbidden, use From=ID");
>             exit;
>         }
>
>         if (client_nat_test("3")) {
>             append_hf("P-hint: route(3)|
> setflag7,forcerport,fix_contact\r\n");
>             setbflag(7);
>             force_rport();
>             fix_contact();
>         }
>
> ..............
>
> route[6] {
>     #
>     # -- NAT Traversal handling --
>     #
>     # Route[6] is the routing block responsible for activating the
> MediaProxy, whenever
>     # the caller or callee is behind NAT (flags 6 or 7 respectively).
>     if (isbflagset(6) || isbflagset(7)) {
>            if ( $dd == $si ) {
>                    xlog("L_INFO", "Both users behind same NAT, so we
> dont use MediaProxy\n");
>                    resetbflag(6);  # Unset NAT flag general.
>                    resetbflag(7);  # Unset NAT flag general.
>         } else
>         append_hf("P-hint: Route[6]: mediaproxy \r\n");
>         use_media_proxy();
>     }
> }
>
> .............
>
> onreply_route[1] {
> #
> #-- On-replay block routing --
> #
>     if (client_nat_test("1")) {
>         append_hf("P-hint: Onreply-route - fixcontact \r\n");
>         fix_contact();
>     }
>
>     if ((isbflagset(6) || isbflagset(7)) && (status=~"(180)|(183)|
> 2[0-9][0-9]")) {
>         if (search("^Content-Type:[ ]*application/sdp")) {
>             append_hf("P-hint: onreply_route|usemediaproxy \r\n");
>         use_media_proxy();
>         }
>     }
>     exit;
> }
>
>
> Thanks again for helping. Really appreciate it.
>
> Regards
> Deon
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>



-- 
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.opensips.org/pipermail/users/attachments/20101102/15c6b80b/attachment-0001.htm 


More information about the Users mailing list