[OpenSIPS-Users] drouting module 1.6.3 with b2b

Anton Zagorskiy a.zagorskiy at oyster-telecom.ru
Thu Dec 16 09:54:07 CET 2010


Hi!

What about investigation my crash?
Should I send any additional information?



> -----Original Message-----
> From: users-bounces at lists.opensips.org [mailto:users-
> bounces at lists.opensips.org] On Behalf Of Anton Zagorskiy
> Sent: Tuesday, December 14, 2010 5:01 PM
> To: 'OpenSIPS users mailling list'
> Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b
> 
> Yes, openSIPS crashed because of there are "INFO:core:sig_usr: signal
> 15 received" messages in a log file.
> I've tested on new VM with CentOS 5.5 with sources from svn stable
> release
> 
> Please see bt and bt full results in the attach.
> 
> 
> Code:
> 
> route
> {
> 	[skipped]
> 
> 	if (!do_routing())
> 	{
> 	    xlog("*** !!! route[invite]: No rules found for do_routing().
> STOP");
> 	    send_reply("503", "Error");
> 	    exit;
> 	};
> 	xlog("*** route[invite]: do_routing() passed");
> 	xlog("*** route[invite]: dr_attrs: $avp(s:dr_attrs); ruri:
> $avp(s:dr_ruri)");
> 	route(main_route);
> 
> 	[skipped]
> }
> 
> 
> 
> route[main_route]
> {
>     xlog("*** +++ route[main_route] has started");
> 
>     if (is_method("INVITE"))
>     {
> 	t_on_branch("2");
> 	t_on_reply("2");
> 	t_on_failure("1");
>     };
> 
>     if (!t_relay())
>     {
> 	sl_reply_error();
>     };
> 
>     xlog("*** --- route[main_route] has finished"); }
> 
> 
> 
> 
> 
> WBR, Anton Zagorskiy
> VoIP Developer, Oyster Telecom
> Phone.: +7 812 601-0666
> Fax: +7 812 601-0593
> a.zagorskiy at oyster-telecom.ru
> www.oyster-telecom.ru
> 
> 
> > -----Original Message-----
> > From: users-bounces at lists.opensips.org [mailto:users-
> > bounces at lists.opensips.org] On Behalf Of Bogdan-Andrei Iancu
> > Sent: Tuesday, December 14, 2010 4:25 PM
> > To: OpenSIPS users mailling list
> > Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b
> >
> > Hi Anton,
> >
> > Why do you say it crashes ? do you have a corefile ?
> >
> > your logs do not show any t_relay() after do_routing()....could you
> > post the relevant snip of your cfg?
> >
> > Regards,
> > Bogdan
> >
> > Anton Zagorskiy wrote:
> > > Hi!
> > >
> > > I'm trying to use drouting module, but something says to me that I
> > using it
> > > wrong because openSIPS goes to crash.
> > >
> > > I've inserted following values in the DB:
> > >
> > > 1. dr_gateways:
> > >
> > > gwid(2)
> > > type(1)
> > > address(192.168.0.10)
> > > strip(0)
> > > pri_prefix(1000)
> > > attrs("")
> > > probe_mode(0)
> > > description(Gateway1)
> > >
> > > 2. dr_groups:
> > > id(1)
> > > username(100)
> > > domain(mydomain.com)
> > > groupid(1)
> > > description(All-Test)
> > >
> > > 3. dr_gw_lists:
> > > id(2)
> > > gwlist(2)
> > > description(Test)
> > >
> > > 4. dr_rules:
> > > ruleid(1)
> > > groupid(1)
> > > prefix(89112599077)
> > > timerec("")
> > > priority(1)
> > > routeid("")
> > > gwlist(#2)
> > > description(Test)
> > > attrs("")
> > >
> > >
> > > So, I'm calling from 100 at mydomain.com to 89112599077.
> > > I'm expecting that this will be routed to 192.168.0.10 with R-URI
> > > 100089112599077 at .. Right?
> > >
> > > But when I'm calling do_routing() the same INVITE is passed to the
> > main
> > > route block and I'm again calling do_routing (Nothing changed in
> the
> > script
> > > :)) and opensips is crashing...
> > >
> > > Log file hasn't helpful messages:
> > >
> > > [8031]: *** route[invite]: call do_routing()
> > > [8031]: DBG:core:db_new_result: allocate 28 bytes for result set at
> > > 0x81ddb78
> > > [8031]: DBG:db_mysql:db_mysql_get_columns: 1 columns returned from
> > the query
> > > [8031]: DBG:core:db_allocate_columns: allocate 16 bytes for result
> > columns
> > > at 0x81ddba4
> > > [8031]: DBG:db_mysql:db_mysql_get_columns:
> > RES_NAMES(0x81ddba8)[0]=[groupid]
> > > [8031]: DBG:db_mysql:db_mysql_get_columns: use DB_INT result type
> > > [8031]: DBG:core:db_allocate_rows: allocate 28 bytes for result
> rows
> > and
> > > values at 0x81ddbd0
> > > [8031]: DBG:db_mysql:db_mysql_str2val: converting INT [1]
> > > [8031]: DBG:core:db_free_columns: freeing result columns at
> > > 0x81ddba4
> > > [8031]: DBG:core:db_free_rows: freeing 1 rows
> > > [8031]: DBG:core:db_free_row: freeing row values at 0x81ddbd8
> > > [8031]: DBG:core:db_free_rows: freeing rows at 0x81ddbd0
> > > [8031]: DBG:core:db_free_result: freeing result set at 0x81ddb78
> > > [8031]: DBG:drouting:do_routing: using dr group 1
> > > [8031]: DBG:drouting:internal_check_rt: found rgid 1 (rule list
> > 0xb60c0d0c)
> > > [8034]: DBG:tm:utimer_routine: timer routine:4,tl=0xb60c34b4
> > next=(nil),
> > > timeout=11900000
> > > [8034]: DBG:tm:retransmission_handler: retransmission_handler :
> > request
> > > resending (t=0xb60c3368, INVITE si ... )
> > > [8034]: DBG:tm:set_timer: relative timeout is 2000000
> > > [8034]: DBG:tm:insert_timer_unsafe: [5]: 0xb60c34b4 (13900000)
> > > [8034]: DBG:tm:retransmission_handler: retransmission_handler :
> done
> > > [8032]: DBG:core:parse_msg: SIP Request:
> > > [8032]: DBG:core:parse_msg:  method:  <INVITE> (# The same INVITE
> is
> > > coming!)
> > >
> > > What I'm doing wrong?
> > >
> > >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users




More information about the Users mailing list