Table of Contents
fr_timeout (integer)fr_inv_timeout (integer)wt_timer (integer)delete_timer (integer)T1_timer (integer)T2_timer (integer)ruri_matching (integer)via1_matching (integer)unix_tx_timeout (integer)restart_fr_on_each_reply (integer)tw_append (string)pass_provisional_replies (integer)syn_branch (integer)onreply_avp_mode (integer)disable_6xx_block (integer)enable_stats (integer)minor_branch_flag (string/integer)timer_partitions (integer)auto_100trying (integer)tm_replication_cluster (integer)cluster_param (string)cluster_auto_cancel (boolean)t_relay([flags])
t_relay(proto:host:port,[flags])
t_reply(code, reason_phrase)
t_reply_with_body(code, reason_phrase, body)
t_newtran()
t_check_trans()
t_check_status(re)
t_local_replied(reply)
t_was_cancelled()
t_cancel_branch([flags])
t_new_request(method,RURI,from,to[,body[,ctx]])
t_on_failure(failure_route)
t_on_reply(reply_route)
t_on_branch(branch_route)
t_inject_branches(source[,flags])
t_wait_for_new_branches()
t_add_hdrs("sip_hdrs")
t_add_cancel_reason("Reason_hdr")
t_replicate(URI,[flags])
t_write_req(info,fifo)
t_write_unix(info,sock)
t_flush_flags()
t_anycast_replicate()
List of Tables
List of Examples
fr_timeout parameterfr_inv_timeout parameterwt_timer parameterdelete_timer parameterT1_timer parameterT2_timer parameterruri_matching parametervia1_matching parameterunix_tx_timeout parameterrestart_fr_on_each_reply parametertw_append parameterpass_provisional_replies parametersyn_branch parameteronreply_avp_mode parameterdisable_6xx_block parameterenable_stats parameterminor_branch_flag parametertimer_partitions parameterauto_100trying parametertm_replication_cluster parametercluster_param parametercluster_auto_cancel parametert_relay usaget_relay usaget_reply usaget_reply_with_body usaget_newtran usaget_check_trans usaget_check_status usaget_local_replied usaget_was_cancelled usaget_cancel_branch usaget_new_request usaget_on_failure usaget_on_reply usaget_on_branch usaget_inject_branches usaget_wait_for_new_branches usaget_add_hdrs usaget_add_cancel_reason usaget_replicate usaget_write_req/unix usaget_flush_flags usaget_anycast_replicate usageTM module enables stateful processing of SIP transactions. The main use of stateful logic, which is costly in terms of memory and CPU, is some services inherently need state. For example, transaction-based accounting (module acc) needs to process transaction state as opposed to individual messages, and any kinds of forking must be implemented statefully. Other use of stateful processing is it trading CPU caused by retransmission processing for memory. That makes however only sense if CPU consumption per request is huge. For example, if you want to avoid costly DNS resolution for every retransmission of a request to an unresolvable destination, use stateful mode. Then, only the initial message burdens server by DNS queries, subsequent retransmissions will be dropped and will not result in more processes blocked by DNS resolution. The price is more memory consumption and higher processing latency.
From user's perspective, the major function is t_relay(). It setup transaction state, absorb retransmissions from upstream, generate downstream retransmissions and correlate replies to requests.
In general, if TM is used, it copies clones of received SIP messages in shared memory. That costs the memory and also CPU time (memcpys, lookups, shmem locks, etc.) Note that non-TM functions operate over the received message in private memory, that means that any core operations will have no effect on statefully processed messages after creating the transactional state. For example, calling record_route after t_relay is pretty useless, as the RR is added to privately held message whereas its TM clone is being forwarded.
TM is quite big and uneasy to program--lot of mutexes, shared memory access, malloc and free, timers--you really need to be careful when you do anything. To simplify TM programming, there is the instrument of callbacks. The callback mechanisms allow programmers to register their functions to specific event. See t_hooks.h for a list of possible events.
Other things programmers may want to know is UAC--it is a very simplistic code which allows you to generate your own transactions. Particularly useful for things like NOTIFYs or IM gateways. The UAC takes care of all the transaction machinery: retransmissions , FR timeouts, forking, etc. See t_uac prototype in uac.h for more details. Who wants to see the transaction result may register for a callback.
First what is the idea with the branch concept: branch route is a route to be execute separately for each branch before being sent out - changes in that route should reflect only on that branch.
There are several types of flags in OpenSIPS :
message/transaction flags - they are visible everywhere in the transaction (in all routes and in all sequential replies/request).
branch flags - flags that are visible only from a specific branch - in all replies and routes connected to this branch.
script flags - flags that exist only during script execution. They are not store anywhere and are lost once the top level route was left.
For example: I have a call parallel forking to GW and to a user. And I would like to know from which branch I will get the final negative reply (if so). I will set a branch route before relaying the calls (with the 2 branches). The branch route will be separately executed for each branch; in the branch going to GW (I can identified it by looking to RURI), I will set a branch flag. This flag will appear only in the onreply route run for replied from GW. It will be also be visible in failure route if the final elected reply belongs to the GW branch. This flags will not be visible in the other branch (in routes executing replies from the other branch).
For how to define branch flags and use via script, see t_on_branch() and the setbflag(), resetbflag() and isbflagset() script functions.
Also, modules may set branch flags before transaction creation (for the moment this feature is not available in script). The REGISTRAR module was the first to use this type of flags. The NAT flag is pushed in branch flags instead in message flags
Timeouts can be used to trigger failover behavior. E.g. if we send a call to a gateway and the gateway does not send a provisional response within 3 seconds, we want to cancel this call and send the call to another gateway. Another example is to ring a SIP client only for 30 seconds and then redirect the call to the voicemail.
The transaction module exports two types of timeouts:
fr_timeout - used when no response was received yet. If there is no response after fr_timeout seconds, the timer triggers (and failure route will be executed if t_on_failure() was called). For INVITE transactions, if a provisional response was received, the timeout is reset to fr_inv_timeout seconds and RT_T2 for all other transactions. Once a final response is received, the transaction has finished.
fr_inv_timeout - this timeout starts counting down once a provisional response was received for an INVITE transaction.
For example: You want to have failover if there is no provisional response after 3 seconds, but you want to ring for 60 seconds. Thus, set the fr_timeout to 3 and fr_inv_timeout to 60.
DNS based failover can be use when relaying stateful requests. According to RFC 3263, DNS failover should be done on transport level or transaction level. TM module supports them both.
Failover at transport level may be triggered by a failure of sending out the request message. A failure occurs if the corresponding interface was found for sending the request, if the TCP connection was refused or if a generic internal error happened during send. There is no ICMP error report support.
Failover at transaction level may be triggered when the transaction completed either with a 503 reply, either with a timeout without any received reply. In such a case, automatically, a new branch will be forked if any other destination IPs can be used to deliver the requests. The new branch will be a clone of the winning branch.
The set of destinations IPs is step-by-step build (on demand) based on the NAPTR, SRV and A records available for the destination domain.
DNS-based failover is by default applied excepting when this failover is globally disabled (see the core parameter disable_dns_failover) or when the relay flag (per transaction) is set (see the t_relay() function).
Doing a load balancing scenario using Anycast IPs, one might run into an issue where a transaction request comes on one instance, and the reply (or replies) comes on different ones. This would normaly break the transaction state, because the local transaction will start re-transmissios and would eventually timeout. Moreover, from UA's perspective, the reply whould have been sent, but since it reaches a proxy that is not aware of that transaction, it will not be forwarded (nor ACKed in case of INVITES). And from this point things can escalade quickly.
To sort out these problems, the module uses a distributed mechanism to figure out where the transaction for a specific reply was created. When an instance receives a reply that does not have an associated transaction, it replicates it to be handled by the instance that “owns” it. This is achieved using the clusterer module support.
Setting up an anycast scenario is very simple: all the instances that are part of an anycast secnario must be set up in a cluster (more info at the tm_replication_cluster param). When a transaction is created, a special identifier is appended to the branch parameter, namely the instance that created the transaction. When a reply comes in, the transaction module checks who “owns” the transaction. If the identifier is the instance's own id, then the reply is processed locally. Otherwise it is replicated to the node indicated by the id. Replication is done in a very efficient manner, using the proto_bin transport.
Special handling is applied to CANCEL and ACK methods. Due to the fact that these methods do not contain the special identifier in the branch parameter (since they are generated by the UAC and not by us), there is no way to determine who “owns” the transaction. Therefore, if we do not find a local transaction for these requests, we broadcast them to all the other instances using the t_anycast_replicate() function. Again, this is done in a very efficient manner using the proto_bin transport.
Transaction functions and variables are only designed to be called on SIP request messages where a transaction can be created, or in routes that are transaction aware, such as branch_route[name], failure_route[name] or onreply_route[name]. Using TM functtions or variables in a route that is not transaction aware, such as the generic onreply_route, error_route or timer_route[name, timer] may lead to undefined behavior, and most of the time in bogus or malformed signalling. Therefore it is strongly recommended to avoid using them in non-tm context aware routes.
The following modules must be loaded before this module:
clusterer module, if the anycast scenario is enabled (see tm_replication_cluster param for more information).
Timeout which is triggered if no final reply for a request or ACK for a negative INVITE reply arrives (in seconds).
Default value is 30 seconds.
Timeout which is triggered if no final reply for an INVITE arrives after a provisional message was received (in seconds). This timeout starts counting down once the first provisional response is received. Thus, fast failover (no 100 trying from gateway) can be achieved by setting fr_timeout to low values. See example below.
Default value is 120 seconds.
Time for which a transaction stays in memory to absorb delayed messages after it completed; also, when this timer hits, retransmission of local cancels is stopped (a puristic but complex behavior would be not to enter wait state until local branches are finished by a final reply or FR timer--we simplified).
For non-INVITE transaction this timer relates to timer J of RFC 3261 section 17.2.2. According to the RFC this timer should be 64*T1 (= 32 seconds). But this would increase memory usage as the transactions are kept in memory very long.
Default value is 5 seconds.
Time after which a to-be-deleted transaction currently ref-ed by a process will be tried to be deleted again.
Default value is 2 seconds.
Retransmission T1 period, in milliseconds.
Default value is 500 milliseconds.
Maximum retransmission period, in milliseconds.
Default value is 4000 milliseconds.
Should be request-uri matching used as a part of pre-3261 transaction matching as the standard wants us to do so? Turn only off for better interaction with devices that are broken and send different r-uri in CANCEL/ACK than in original INVITE.
Default value is 1 (true).
Should be top most VIA matching used as a part of pre-3261 transaction matching as the standard wants us to do so? Turn only off for better interaction with devices that are broken and send different top most VIA in CANCEL/ACK than in original INVITE.
Default value is 1 (true).
Send timeout to be used by function which use UNIX sockets (as t_write_unix).
Default value is 2 seconds.
If true (non null value), the final response timer will be re-triggered for each received provisional reply. In this case, final response timeout may occur after a time longer than fr_inv_timeout (if UAS keeps sending provisional replies)
Default value is 1 (true).
Example 1.10. Set restart_fr_on_each_reply parameter
...
modparam("tm", "restart_fr_on_each_reply", 0)
...
List of additional information to be appended by t_write_req and t_write_unix functions.
Default value is null string.
Syntax of the parameter is:
tw_append = append_name':' element (';'element)*
element = ( [name '='] variable)
Each element will be appended per line in “name: value” format. Element “$rb (message body)” is the only one which does not accept name; the body it will be printed all the time at the end, disregarding its position in the definition string.
Example 1.11. Set tw_append parameter
...
modparam("tm", "tw_append",
"test: ua=$hdr(User-Agent) ;avp=$avp(avp);$rb;time=$Ts")
...
Enable/disable passing of provisional replies to FIFO applications.
Default value is 0.
Example 1.12. Set pass_provisional_replies parameter
...
modparam("tm", "pass_provisional_replies", 1)
...
Enable/disable the usage of stateful synonym branch IDs in the generated Via headers. They are faster but not reboot-safe.
Default value is 1 (use synonym branches).
Describes how the AVPs should be handled in reply route:
0 - the AVPs will be per message only; they will not interfere with the AVPS stored in transaction; initially there will be an empty list and at the end of the route, all AVPs that were created will be discarded.
1 - the AVPs will be the transaction AVPs; initially the transaction AVPs will be visible; at the end of the route, the list will attached back to transaction (with all the changes)
In mode 1, you can see the AVPs you set in request route, branch route or failure route. The side effect is performance as more locking is required in order to keep the AVP's list integrity.
Default value is 0.
Tells how the 6xx replies should be internally handled:
0 - the 6xx replies will block any further serial forking (adding new branches). This is the RFC3261 behaviour.
1 - the 6xx replies will be handled as any other negative reply - serial forking will be allowed. Logically, you need to break RFC3261 if you want to do redirects to announcement and voicemail services.
Default value is 0.
Enables statistics support in TM module - If enabled, the TM module will internally keep several statistics and export them via the MI - Management Interface.
Default value is 1 (enabled).
A branch flag index to be used in script to mark the minor branches ( before t_relay() ).
A minor branch is a branch OpenSIPS will not wait to complete during parallel forking. So, if the rest of the branches are negativly replied OpenSIPS will not wait for a final answer from the minor branch, but it will simply cancel it.
Main applicability of minor branch is to fork a branch to a media server for injecting (via 183 Early Media) some pre-call media - of course, this branch will be transparanent for the rest of the call branches (from branch selection point of view).
Default value is none (disabled).
Example 1.17. Set minor_branch_flag parameter
...
modparam("tm", "minor_branch_flag", "MINOR_BFLAG")
...
The number of partitions for the internal TM timers (retransmissions, delete, wait, etc). Partitioning the timers increase the throughput under heavly load by handling timer events in parallel, rather than all serial.
Recomanded range for timer partitions is max 16 (soft limit).
Default value is 1 (disabled).
Example 1.18. Set timer_partitions parameter
...
# Enable two timer partitions
modparam("tm", "timer_partitions", 2)
...
This parameter controls if the TM module should automatically generate an 100 Trying stateful reply when an INVITE transaction is created.
You may want to disable this behavior if you want to control from script level when the 100 Trying is to be sent out.
Default value is 1 (enabled).
Example 1.19. Set auto_100trying parameter
...
# Disable automatic 100 Trying
modparam("tm", "auto_100trying", 0)
...
This parameter should be used in an anycast setup, and specifies the cluster id of all the nodes that use an anycast IP.
Check out the tm_anycast section for more details.
Anycast replication is disabled by default.
Example 1.20. Set tm_replication_cluster parameter
...
# replicate anycast messages in cluster 1
modparam("tm", "tm_replication_cluster", 1)
...
This parameter should be used in an anycast setup, and specifies the name of the parameter used in the VIA branch param to specifiy the instance id that created the transaction.
Check out the tm_anycast section for more details.
Default value is cid.
This parameter should be used in an anycast setup, and specifies whether a CANCEL message received on a listener that is marked as anycast should be automatically handled, or should get in the OpenSIPS script. If this parameter is enabled (default), CANCEL messages received on an anycast listener will never enter the script, thus making the script cleaner.
Check out the tm_anycast section for more details.
Default value is yes (enabled).
Example 1.22. Set the cluster_auto_cancel parameter
...
# disable auto-cancel handling
modparam("tm", "cluster_auto_cancel", no)
...
Relay a message statefully to destination indicated in current URI. (If the original URI was rewritten by UsrLoc, RR, strip/prefix, etc., the new URI will be taken). Returns a negative value on failure--you may still want to send a negative reply upstream statelessly not to leave upstream UAC in lurch.
The coresponding transaction may or may not be already created. If not yet created, the function will automatically create it.
The function may take as parameter an optional set of flags for controlling the internal behaviour. The flags may be given in decimal or hexa format; supported flags are:
0x01 - deprecated, not used any more
0x02 - do not internally generate and send a "477 Send failed (477/TM)" SIP reply in case of a global forwarding failure (i.e. forwarding for each branch has failed due to internal errors, bad R-URI, bad message, lack of network reachability, etc.).
This flag only applies if the transaction was not previously created by t_newtran(). When a global forwarding failure occurs, no SIP request is relayed and therefore no negative SIP reply or timeout will show up on the failure_route, if one is set.
Useful if you want to implement a failover logic for when none of the currently created branches can be forwarded to.
0x04 - disable the DNS failover for the transaction. Only first IP will be used. It disables the failover both at transport and transaction level.
0x08 - If the request is a CANCEL, trust and pass further the Reason header from the received CANCEL - shortly, will propagate the Reason header.
0x10 - Allows OpenSIPS to inspect and follow the Content-Disposition "no-cancel" indication (if present). As per RFC3841, section 9.1, the TM module may be instructed not to cancel all ongoing branches when a 2xx reply is received. It will keep the pending branches ongoing until (1) all branches will receive a final reply or (2) the transactionhits the timeout.
In case of error, the function returns the following codes:
-1 - generic internal error
-2 - bad message (parsing errors)
-3 - no destination available (no branches were added or request already cancelled)
-4 - bad destination (unresolvable address)
-5 - destination filtered (black listed)
-6 - generic send failed
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.
Relay a message statefully to a fixed destination. The destination is specified as “[proto:]host[:port]”. If a destination URI “$du” for this message was set before the function is called then this value will be used as the destination instead of the function parameter.
The function may take as parameter an optional set of flags for controlling the internal behaviour - for details see the above “t_relay([flags])” function.
This functions can be used from REQUEST_ROUTE, FAILURE_ROUTE.
Example 1.24. t_relay usage
...
t_relay("tcp:192.168.1.10:5060");
t_relay("mydomain.com:5070","0x1");
t_relay("udp:mydomain.com");
...
Sends a stateful SIP reply to the currently processed requests. Note
that if the transaction was not created yet, it will automatically
created by internally using the
t_newtran function.
Meaning of the parameters is as follows:
code - Reply code number.
reason_phrase - Reason string.
Both parameters accept any kind of variables.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.
Sends a stateful SIP reply with a body to the currently processed
requests. Note that if the transaction was not created yet, it will
automatically created by internally using the
t_newtran function.
Meaning of the parameters is as follows:
code - Reply code number.
reason_phrase - Reason string.
body - Reply body.
All parameters accept any kind of variables.
This function can be used from REQUEST_ROUTE.
Example 1.26. t_reply_with_body usage
...
if(is_method("INVITE"))
{
append_to_reply("Contact: $var(contact)\r\n"
"Content-Type: application/sdp\r\n");
t_reply_with_body("200", "Ok", "$var(body)");
exit;
}
...
Creates the SIP transaction for the currently processed SIP request, thus switching to stateful processing. For INVITE requests, a 100 Trying reply will be immediately sent, unless auto_100trying is disabled. Once a SIP transaction is created, calling t_newtran() for retransmitted requests will end the OpenSIPS script execution, with the lastly sent reply being retransmitted upstream.
This function can be used from REQUEST_ROUTE.
Example 1.27. t_newtran usage
...
t_newtran(); # 100 Trying is fired here
xlog("doing my complicated routing logic\n");
....
t_relay(); # send the call further
...
Returns true if the current request is associated to a transaction. The relationship between the request and transaction is defined as follows:
non-CANCEL/non-ACK requests - if the request belongs to a transaction (it's a retransmision), the function will do a standard processing of the retransmission and will break/stop the script. The function returns false if the request is not a retransmission.
CANCEL request - true if the cancelled INVITE transaction exists.
ACK request - true if the ACK is a hop-by-hop ACK (to a negative reply) corresponding to an previous INVITE transaction. IMPORTANT: this function returns false (return code -2) for end-to-end ACKs (to 2xx replies from a different transaction).
Note: To detect retransmissions using this function you have to make sure that the initial request has already created a transaction, e.g. by using t_relay(). If the processing of requests may take long time (e.g. DB lookups) and the retransmission arrives before t_relay() is called, you can use the t_newtran() function to manually create a transaction.
This function can be used from REQUEST_ROUTE and BRANCH_ROUTE.
Example 1.28. t_check_trans usage
...
if ( is_method("CANCEL") ) {
if ( t_check_trans() )
t_relay();
exit;
}
...
Returns true if the regualr expression “re” match the reply code of the response message as follows:
in routing block - the code of the last sent reply.
in on_reply block - the code of the current received reply.
in on_failure block - the code of the selected negative final reply.
This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE and BRANCH_ROUTE .
Example 1.29. t_check_status usage
...
if (t_check_status("(487)|(408)")) {
log("487 or 408 negative reply\n");
}
...
Returns true if all or last (depending of the parameter) reply(es) were local generated (and not received).
Parameter may be “all” or “last”.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, FAILURE_ROUTE and ONREPLY_ROUTE.
Example 1.30. t_local_replied usage
...
if (t_local_replied("all")) {
log ("no reply received\n");
}
...
Retuns true if called for an INVITE transaction that was explicitly cancelled by UAC side via a CANCEL request.
This function can be used from ONREPLY_ROUTE, FAILURE_ROUTE.
Example 1.31. t_was_cancelled usage
...
if (t_was_cancelled()) {
log("transaction was cancelled by UAC\n");
}
...
This function is to be call when a reply is received for cancelling a set of branches (see flags) of the current call.
Meaning of the parameters is as follows:
flags - (optional) - set of flags (char based flags) to control what branches to be cancelled:
a - all - cancel all pending branches
o - others - cancel all the other pending branches except the current one
empty - current - cancel only the current branch
This function can be used from ONREPLY_ROUTE.
Example 1.32. t_cancel_branch usage
onreply_route[3] {
...
if (t_check_status("183")) {
# no support for early media
t_cancel_branch();
}
...
}
This function generates and sends out a new SIP request (in a stateful way). The new request is completly unrelated to the currently processed SIP message.
Meaning of the parameters is as follows (all do accept variables):
method - the SIP method
RURI - the SIP Request URI (the request will be sent out to this destination)
from - the SIP From hdr information as "[display ]URI"
from - the SIP To hdr information as "[display ]URI"
body - (optional) the SIP body content starting with the content type string: "conten_type body"
ctx - a context string that will be added to the new transaction as an AVP with name "uac_ctx" (it may be visible in local route)
Example 1.33. t_new_request usage
...
# send a MESSAGE request
t_new_request("MESSAGE","sip:alice@192.168.2.2","BOB sip:userB@mydomain.net","ALICE sip:userA@mydomain.net","text/plain Hello Alice!")) {
...
Sets reply routing block, to which control is passed after a transaction completed with a negative result but before sending a final reply. In the referred block, you can either start a new branch (good for services such as forward_on_no_reply) or send a final reply on your own (good for example for message silo, which received a negative reply from upstream and wants to tell upstream “202 I will take care of it”).
As not all functions are available from failure route, please check the documentation for each function to see the permissions. Any other commands may result in unpredictable behavior and possible server failure.
Only one failure_route can be armed for a request. If you use many times t_on_failure(), only the last one has effect.
Note that whenever failure_route is entered, RURI is set to value of the winning branch.
Meaning of the parameters is as follows:
failure_route - Reply route block to be called.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.
Example 1.34. t_on_failure usage
...
route {
t_on_failure("1");
t_relay();
}
failure_route[1] {
seturi("sip:user@voicemail");
t_relay();
}
...
Sets reply routing block, to which control is passed each time a reply (provisional or final) for the transaction is received. The route is not called for local generated replies! In the referred block, you can inspect the reply and perform text operations on it.
As not all functions are available from this type of route, please check the documentation for each function to see the permissions. Any other commands may result in unpredictable behavior and possible server failure.
If called from branch route, the reply route will be set only for the current branch - that's it, it will be called only for relies belonging to that particular branch. Of course, from branch route, you can set different reply routes for each branch.
When called from a non-branc route, the reply route will be globally set for tha current transaction - it will be called for all replies belonging to that transaction. NOTE that only one> onreply_route can be armed for a transaction. If you use many times t_on_reply(), only the last one has effect.
If the processed reply is provisionla reply (1xx code), by calling the drop() function (exported by core), the execution of the route will end and the reply will not be forwarded further.
Meaning of the parameters is as follows:
reply_route - Reply route block to be called.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.
Example 1.35. t_on_reply usage
...
route {
seturi("sip:bob@opensips.org"); # first branch
append_branch("sip:alice@opensips.org"); # second branch
t_on_reply("global"); # the "global" reply route
# is set the whole transaction
t_on_branch("1");
t_relay();
}
branch_route[1] {
if ($rU=="alice")
t_on_reply("alice"); # the "alice" reply route
# is set only for second branch
}
onreply_route[alice] {
xlog("received reply from alice\n");
}
onreply_route[global] {
if (t_check_status("1[0-9][0-9]")) {
setflag(LOG_FLAG);
log("provisional reply received\n");
if (t_check_status("183"))
drop;
}
}
...
Sets a branch route to be execute separately for each branch of the transaction before being sent out - changes in that route should reflect only on that branch.
As not all functions are available from this type of route, please check the documentation for each function to see the permissions. Any other commands may result in unpredictable behavior and possible server failure.
Only one branch_route can be armed for a request. If you use many time t_on_branch(), only the last one has effect.
By calling the drop() function (exported by core), the execution of the branch route will end and the branch will not be forwarded further.
Meaning of the parameters is as follows:
branch_route - Branch route block to be called.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, ONREPLY_ROUTE and FAILURE_ROUTE.
Example 1.36. t_on_branch usage
...
route {
t_on_branch("1");
t_relay();
}
branch_route[1] {
if ($ru=~"bad_uri") {
xlog("dropping branch $ru \n");
drop;
}
if ($ru=~"GW_uri") {
append_rpid();
}
}
...
The function adds new SIP branches (destinations) to an existing transaction and fires them (sends them out). The transaction may already have ongoing branches (like in ringing state), which will not be affected by the injection of the new branches. Also it is possible for the transaction not to have any ongoing branches at the moment of the injection (still, the transaction must wait for new branches, even if all existing ones are completed - see the t_wait_for_new_branches() function for this).
The main usage scenario for this function (and also what makes it different from t_relay() is the ability to add new branches to an ongoing transaction from script routes not related to the transaction ( like timer route, event route, notification route, and other). In such routes, other functions/module used before the injection will point to the transaction to be affected by this injection - see the event_routing module.
Parameters:
source - where to take the description for the new branches to be injected. It can be
flags - (optional) some additional flags related to the injection process:
Example 1.37. t_inject_branches usage
...
route[event_notification] {
t_inject_branches("event");
}
...
This function instructs the existing SIP transaction to wait for new branches to be injected even after the completion of the existing branches. This waiting will be done until the Final Response INVITE timer (fr_inv_timeout) will hit for the transaction; of course, the waiting will be terminated if the transaction gets a 2xx final reply from one of the branches.
Normally if you have a transaction with two branches and they get, let's say, a 404 and 486 replies, the branches will be completed and transaction terminated by sending the 404 reply to the caller. Still, if you do t_wait_for_new_branches before relaying the transaction, the transaction will not terminate upon the completion of the branches and not send the 404 to the caller - it will wait for new branches to be injected (see t_inject_branches() function) until the fr_inv timer hits.
Example 1.38. t_wait_for_new_branches usage
... t_newtran(); t_wait_for_new_branches(); t_relay(); ...
Attach a set of headers to the existing transaction - these headers will be appended to all requests related to the transaction (outgoing branches, local ACKS, CANCELs).
Example 1.40. t_add_cancel_reason usage
...
t_add_cancel_reason("Reason: SIP ;cause=200 ;text=\"Call completed elsewhere\"\r\n");
t_relay();
...
Replicates a request to another destination. No information due the replicated request (like reply code) will be forwarded to the original SIP UAC.
The destination is specified by a SIP URI. If multiple destinations are to be used, the additional SIP URIs have to be set as branches.
The function may take as parameter an optional set of flags for controlling the internal behaviour - for description see the above “t_relay([flags])” function. Note that only 0x4 is applicable here.
This functions can be used from REQUEST_ROUTE.
Example 1.41. t_replicate usage
...
t_replicate("sip:1.2.3.4:5060");
t_replicate("sip:1.2.3.4:5060;transport=tcp");
t_replicate("sip:1.2.3.4","0x4");
...
Write via FIFO file or UNIX socket a lot of information regarding the request. Which information should be written may be control via the “tw_append” parameter.
This functions can be used from REQUEST_ROUTE, FAILURE_ROUTE and BRANCH_ROUTE.
Example 1.42. t_write_req/unix usage
...
modparam("tm","tw_append","append1:Email=$avp(email);UA=$ua")
modparam("tm","tw_append","append2:body=$rb")
...
t_write_req("voicemail/append1","/tmp/appx_fifo");
...
t_write_unix("logger/append2","/var/run/logger.sock");
...
Flush the flags from current request into the already created transaction. It make sense only in routing block if the transaction was created via t_newtran() and the flags have been altered since.
This function can be used from REQUEST_ROUTE and BRANCH_ROUTE .
This function is used in an anycast setup to replicate a CANCEL or ACK method for whom there are no local transactions found. The function broadcasts the message to all the other nodes in the cluster, but only the “owner” of the transaction will be able to handle it.
Example 1.44. t_anycast_replicate usage
...
if (is_method("ACK|CANCEL") && !t_check_trans()) {
t_anycast_replicate();
exit;
}
...
Exported variables are listed in the next sections.
$T_branch_idx - the index (starting with 0 for the first branch) of the currently proccessed branch. This index makes sense only in BRANCH and REPLY routes (where there is a concept of per branch processing). In all the other types of routes, the value of this index will be NULL.
$T_reply_code - the code of the reply, as follows: in request_route will be the last stateful sent reply; in reply_route will be the current processed reply; in failure_route will be the negative winning reply. In case of no-reply or error, '0' value is returned.
$T_fr_timeout (R/W) - the timeout for the final reply to the current transaction
With each different request received, $T_fr_timeout will initially be equal to the fr_timeout parameter.
"$T_fr_timeout = NULL;" will reset it to fr_timeout.
$T_fr_inv_timeout (R/W) - the timeout for the final reply to an INVITE request, after a 1XX reply was received
With each different request received, $T_fr_inv_timeout will initially be equal to the fr_inv_timeout parameter.
"$T_fr_inv_timeout = NULL;" will reset it to fr_inv_timeout.
$T_ruri - the ruri of the current branch; this information is taken from the transaction structure, so you can access this information for any sip message (request/reply) that has a transaction.
$bavp(name) - a particular type of avp that can have different values for each branch. They can only be used in BRANCH, REPLY and FAILURE routes. Otherwise NULL value is returned.
Generates and sends a local SIP request.
Parameters:
method - request method
RURI - request SIP URI
NEXT HOP - next hop SIP URI (OBP); use “.” if no value.
socket - local socket to be used for sending the request; use “.” if no value.
headers - set of additional headers to be added to the request; at least “From” and “To” headers must be specify)
body - (optional, may not be present) request body (if present, requires the “Content-Type” and “Content-length” headers)
MI FIFO Command Format:
opensipsctl fifo t_uac_dlg INVITE "sip:123456@127.0.0.1:5060 SIP/2.0" . . "\"From: sipp:6024151234@127.0.0.1:5090>\r\nTo: sip:test@127.0.0.1:5060\r\nContact: sip:sipp@127.0.0.1:5090\r\n"\"
Generates and sends a CANCEL for an existing SIP request.
Parameters:
callid - callid of the INVITE request to be cancelled.
cseq - cseq of the INVITE request to be cancelled.
MI FIFO Command Format:
opensipsctl fifo t_uac_cancel "1-23454@127.0.0.1" "1 INVITE"
Gets information about the load of TM internal hash table.
Parameters:
none
MI FIFO Command Format:
opensipsctl fifo t_hash
Generates and sends a reply for an existing inbound SIP transaction.
Parameters:
code - reply code
reason - reason phrase.
trans_id - transaction identifier (has the hash_entry:label format)
to_tag - To tag to be added to TO header
new_headers - extra headers to be appended to the reply; use a dot (“.”) char only if there are no headers;
body - (optional, may not be present) reply body (if present, requires the “Content-Type” and “Content-length” headers)
MI FIFO Command Format:
opensipsctl fifo t_reply 403 Forbidden 46961:1279687637 abcde .
Exported statistics are listed in the next sections. All statistics except “inuse_transactions” can be reset.
3.1. | What happened with old cancel_call() function |
The function was replace (as functionality) by cancel_branch("a") - cancel all braches. | |
3.2. | How can I report a bug? |
Please follow the guidelines provided at: https://github.com/OpenSIPS/opensips/issues. |
Table 4.1. Top contributors by DevScore(1), authored commits(2) and lines added/removed(3)
| Name | DevScore | Commits | Lines ++ | Lines -- | |
|---|---|---|---|---|---|
| 1. | Bogdan-Andrei Iancu (@bogdan-iancu) | 1032 | 585 | 20683 | 15863 |
| 2. | Jiri Kuthan (@jiriatipteldotorg) | 545 | 198 | 18723 | 11167 |
| 3. | Jan Janak (@janakj) | 160 | 76 | 6462 | 1840 |
| 4. | Andrei Pelinescu-Onciul | 147 | 105 | 2447 | 1210 |
| 5. | Razvan Crainea (@razvancrainea) | 105 | 83 | 1686 | 423 |
| 6. | Liviu Chircu (@liviuchircu) | 81 | 59 | 1046 | 685 |
| 7. | Daniel-Constantin Mierla (@miconda) | 43 | 37 | 322 | 166 |
| 8. | Anca Vamanu | 38 | 19 | 778 | 651 |
| 9. | Vlad Paiu (@vladpaiu) | 25 | 22 | 169 | 55 |
| 10. | Henning Westerholt (@henningw) | 24 | 19 | 122 | 184 |
All remaining contributors: Dan Pascu (@danpascu), Ovidiu Sas (@ovidiusas), Vlad Patrascu (@rvlad-patrascu), Juha Heinanen (@juha-h), Ionut Ionita (@ionutrazvanionita), Maksym Sobolyev (@sobomax), Raphael Coeffic, Nils Ohlmeier, Klaus Darilion, Andreas Granig, Elias Baixas, Marcus Hunger, Christophe Sollet (@csollet), Jeffrey Magder, Ezequiel Lovelle (@lovelle), Saúl Ibarra Corretgé (@saghul), Elena-Ramona Modroiu, John Riordan, Julián Moreno Patiño, Andrei Dragus, Jesus Rodrigues, Konstantin Bokarius, Aron Podrigal (@ar45), Anonymous, Dusan Klinec (@ph4r05), Mark Dalby, Walter Doekes (@wdoekes), Alexey Vasilyev (@vasilevalex), Nick Altmann (@nikbyte), Peter Lemenkov (@lemenkov), Edson Gellert Schubert, Ingo Wolfsberger, Daniel Hsueh.
(1) DevScore = author_commits + author_lines_added / (project_lines_added / project_commits) + author_lines_deleted / (project_lines_deleted / project_commits)
(2) including any documentation-related commits, excluding merge commits. Regarding imported patches/code, we do our best to count the work on behalf of the proper owner, as per the "fix_authors" and "mod_renames" arrays in opensips/doc/build-contrib.sh. If you identify any patches/commits which do not get properly attributed to you, please submit a pull request which extends "fix_authors" and/or "mod_renames".
(3) ignoring whitespace edits, renamed files and auto-generated files
Table 4.2. Most recently active contributors(1) to this module
| Name | Commit Activity | |
|---|---|---|
| 1. | Razvan Crainea (@razvancrainea) | Jul 2010 - Mar 2021 |
| 2. | Bogdan-Andrei Iancu (@bogdan-iancu) | Nov 2001 - Mar 2021 |
| 3. | Peter Lemenkov (@lemenkov) | Feb 2021 - Feb 2021 |
| 4. | Vlad Patrascu (@rvlad-patrascu) | May 2017 - Nov 2020 |
| 5. | Liviu Chircu (@liviuchircu) | Jan 2013 - Nov 2020 |
| 6. | Dan Pascu (@danpascu) | Feb 2006 - May 2019 |
| 7. | Aron Podrigal (@ar45) | Nov 2018 - Nov 2018 |
| 8. | Alexey Vasilyev (@vasilevalex) | Sep 2018 - Sep 2018 |
| 9. | Vlad Paiu (@vladpaiu) | Jun 2011 - May 2016 |
| 10. | Ionut Ionita (@ionutrazvanionita) | Nov 2014 - Apr 2016 |
All remaining contributors: Julián Moreno Patiño, Nick Altmann (@nikbyte), Ovidiu Sas (@ovidiusas), Dusan Klinec (@ph4r05), Ezequiel Lovelle (@lovelle), Walter Doekes (@wdoekes), Christophe Sollet (@csollet), Maksym Sobolyev (@sobomax), Saúl Ibarra Corretgé (@saghul), Anonymous, Mark Dalby, Anca Vamanu, Andrei Dragus, John Riordan, Henning Westerholt (@henningw), Klaus Darilion, Daniel-Constantin Mierla (@miconda), Konstantin Bokarius, Edson Gellert Schubert, Jesus Rodrigues, Marcus Hunger, Juha Heinanen (@juha-h), Jeffrey Magder, Elias Baixas, Daniel Hsueh, Andreas Granig, Elena-Ramona Modroiu, Ingo Wolfsberger, Andrei Pelinescu-Onciul, Jan Janak (@janakj), Jiri Kuthan (@jiriatipteldotorg), Raphael Coeffic, Nils Ohlmeier.
(1) including any documentation-related commits, excluding merge commits
Last edited by: Razvan Crainea (@razvancrainea), Liviu Chircu (@liviuchircu), Alexey Vasilyev (@vasilevalex), Vlad Patrascu (@rvlad-patrascu), Bogdan-Andrei Iancu (@bogdan-iancu), Nick Altmann (@nikbyte), Ovidiu Sas (@ovidiusas), Vlad Paiu (@vladpaiu), Anca Vamanu, Henning Westerholt (@henningw), Klaus Darilion, Daniel-Constantin Mierla (@miconda), Konstantin Bokarius, Edson Gellert Schubert, Dan Pascu (@danpascu), Juha Heinanen (@juha-h), Elena-Ramona Modroiu, Jan Janak (@janakj), Jiri Kuthan (@jiriatipteldotorg).
doc copyrights:
Copyright © 2005-2008 Voice Sistem SRL
Copyright © 2003 FhG FOKUS