Copyright © 2007-2008 Voice Sistem SRL
| Revision History | |
|---|---|
| Revision $Revision: 5895 $ | $Date$ |
Table of Contents
partition (string)db_url (string)table_name (string)dpid_col (string)pr_col (string)match_op_col (string)match_exp_col (string)match_flags_col (string)subst_exp_col (string)repl_exp_col (string)timerec_col (integer)disabled_col (integer)attrs_col (string)List of Examples
partition parameterdefault partition with partition parameterdb_url parametertable_name parameterdpid_col parameterpr_col parametermatch_op_col parametermatch_exp_col parametermatch_flags_col parametersubs_exp_col parameterrepl_exp_col parametertimerec_col parameterdisabled_col parameterattrs_col parameterdp_translate usagedp_translate usagedp_translate usagedp_translate usageThis module implements generic string translations based on matching and replacement rules. It can be used to manipulate R-URI or a PV and to translated to a new format/value.
At startup, the module will load all transformation rules from one or more dialplan-compatible tables. The data of each table will be stored in a partition which is defined by the "db_url" and "table_name" parameters. Every table row will be stored in memory as a translation rule. Each rule will describe how the matching should be made, how the input value should be modified and which attributes should be set for the matching transformation.
A dialplan rule can be of two types:
"String matching" rule - performs a string equality test against the input string. The case of the characters can be ignored by enabling bit 1 of the rule's "match_flags" bitmask column (i.e. set the column value to 1 or 0, for insensitive or sensitive)
"Regex matching" rule - uses Perl Compatible Regular Expressions, and will attempt to match the rule's expression against an input string. The regex maching can be done in a caseless manner by enabling bit 1 of the rule's "match_flags" bitmask column (i.e. set the column value to 1 or 0, for insensitive or sensitive)
The module provides the dp_translate() script function, which expects an input string value that will be matched, at worst, against all rules of a partition.
Internally, the module groups a partition's rules into two sets, "string" and "regex". The matching logic will attempt to find the first match within each of these two sets of rules. Each set will be iterated in ascending order of priority. If an input string happens to match a rule in each of the two sets, the rule with the smallest priority will be chosen. Furthermore, should these two matching rules also have equal priorities, the one with the smallest "id" field (the unique key) will be chosen.
Once a single rule is decided upon, the defined transformation (if any) is applied and the result is returned as output value. Also, if any string attribute is associated to the rule, this will be returned to the script along with the output value.
The module can be used to implement dialplans - to do auto completion of the dialed numbers (e.g. national to international), to convert generic numbers to specific numbers (e.g. for emergency numbers).
Also the module can be used for detecting ranges or sets of numbers mapped on a service/case - the "attributes" string column can be used here to store extra information about the service/case.
Non-SIP string translation can also be implemented - like converting country names from all possible formats to a canonical format: (UK, England, United Kingdom) -> GB.
Any other string-based translation or detection for whatever other purposes.
Depending what kind of operation (translation, matching, etc) you want to do with the module, you need to populate the appropriate DB records.
The definition of the tables used by the dialplan module can be found at http://www.opensips.org/html/docs/db/db-schema-devel.html#AEN1501
Recognize a number block in all forms (international, national) and convert it to a canonical format (E.164)
match_op = 1 (regexp)
match_exp = "^(0040|\+40|0|40)21[0-9]+" ; regular expression that will be used to match with this rule (if the rule should be applied for the input string)
match_flags = 0 (0 - case sensitive, 1 - case insensitive matching)
subst_exp = "^(0040|\+40|0|40)(.+)" ; regular expression used to do the transformation (first part of the subst operation)
repl_exp = "40\2" ; second part of the subst (output) - linked to the subst_exp field; when both defined, they work as a subst()
Recognize the name of a country (multiple languages) and convert it to a single, fixed value
match_op = 1 (regexp)
match_exp = "^((Germany)|(Germania)|(Deutschland)|(DE))" ; regular expression that will be used to match with this rule (if the rule should be applied for the input string)
match_flags = 0 (0 - case sensitive, 1 - case insensitive matching)
subst_exp = NULL ; when translation is actually a replacement, this field must be NULL.
repl_exp = "DE" ; static string to replace the input - whenever this rule will match, it will return this string as output.
Recognize a block of numbers as belong to a single service and signalize this via an attribute.
match_op = 1 (regexp)
match_exp = "^021456[0-9]{5}" ; regular expression that will be used to match with this rule (if the rule should be applied for the input string)
match_flags = 0 (0 - case sensitive, 1 - case insensitive matching)
subst_exp = NULL ; no translation
repl_exp = NULL ; no translation
attrs = "serviceX" ; whatever string you will get into OpenSIPS script and it will provide you more information (totally custom)
Recognize a fixed string/number and replace it with something fixed.
match_op = 0 (equal)
match_exp = "SIP server" ; string to be matched
match_flags = 0 (0 - case sensitive, 1 - case insensitive matching)
subst_exp = NULL ; no subst translation
repl_exp = "OpenSIPS" ; output string
The following libraries or applications must be installed before running OpenSIPS with this module loaded:
libpcre-dev - the development libraries of PCRE.
This can be used to define new db_url and table_name parameters from which to load the translation rules. These parameters will be held in partitions. The db_url parameter is mandatory. The order of the parameters does not matter. Multiple partitions can be defined and you can also define the default partition here. The name of this partition is "default". In order to be able to use a table from a partition, its name must be found in the "version" table belonging to the database defined in the partition's db_url.
Example 1.1. Set partition parameter
...
modparam("dialplan", "partition", " part2 : table_name = dialplan ; db_url = mysql://user:passwb@localhost/db;")
...
Example 1.2. Set default partition with partition parameter
...
modparam("dialplan", "partition", " default : table_name = dialplan ; db_url = mysql://user:passwb@localhost/db;")
...
The translation rules will be loaded using this database url.This will be the db_url parameter value for the default partition.
Example 1.3. Set db_url parameter
...
modparam("dialplan", "db_url", "mysql://user:passwb@localhost/db")
...
The table's name from which to load the translation rules.This will be the table_name parameter value for the default partition. The db_url must be defined for the default partition in order to be able to define it's table name.
Default value is “dialplan”.
The column name to store the dialplan ID group.
Default value is “dpid”.
The column name to store the priority of the corresponding rule from the table row. Smaller priority values have higher precedence.
Default value is “pr”.
The column name to store the type of matching of the rule.
Default value is “match_op”.
The column name to store the rule match expression.
Default value is “match_exp”.
Example 1.8. Set match_exp_col parameter
...
modparam("dialplan", "match_exp_col", "column_name")
...
The column name to store various matching flags. Currently 0 - case sensitive matching, 1 - case insensitive matching.
Default value is “match_flags”.
Example 1.9. Set match_flags_col parameter
...
modparam("dialplan", "match_flags_col", "column_name")
...
The column name to store the rule's substitution expression.
Default value is “subst_exp”.
Example 1.10. Set subs_exp_col parameter
...
modparam("dialplan", "subst_exp_col", "column_name")
...
The column name to store the rule's replacement expression.
Default value is “repl_exp”.
Example 1.11. Set repl_exp_col parameter
...
modparam("dialplan", "repl_exp_col", "column_name")
...
The column name that indicates an additional time recurrence check within the rule. (column values are RFC 2445-compatible strings)
Default value is “timerec”.
Will try to translate the src string into dest string according to the translation rules with dialplan ID equal to id.
Meaning of the parameters is as follows:
id - the dialplan id of possible matching rules. The id parameter can have the following types:
integer - the dialplan id is statically assigned
pvar - the dialplan id is the value of an existing pseudo-variable (as integer value)
partition - Specifies the partition where the search will take place. This parameter can be ommited. If the paramater is omitted the default partition will be used if exists. The partition parameter can have the following types:
string - the table name is statically assigned
pvar - the partition name is the value of an existing pseudo-variable (as string value)
src/dest - input and output of the function. If this parameter is missing the default parameter “ruri.user/ruri.user” will be used, thus translating the request uri.
The “src” variable can be any type of pseudo-variable.
The “dest” variable can be also any type of pseudo-variable, but it must be a writable one.
attrs_pvar (output, optional) - a pseudo-variable which will hold the attributes of the matched translation rule.
This function can be used from REQUEST_ROUTE, BRANCH_ROUTE.
Example 1.15. dp_translate usage
...
dp_translate("240", "$ruri.user/$avp(dest)");
xlog("translated to var $avp(dest) \n");
...
Example 1.16. dp_translate usage
...
$avp(src) = $ruri.user;
dp_translate("$var(x)", "$avp(src)/$var(y)", "$var(attrs)");
xlog("translated to var $var(y) with attributes: '$var(attrs)'\n");
...
Example 1.17. dp_translate usage
...
$avp(src) = $uri.user;
dp_translate("example_partition:$var(x)", "$avp(src)/$var(y)", "$avp(attrs)");
xlog("translated to var $var(y) with attributes: '$avp(attrs)'\n");
...
Example 1.18. dp_translate usage
...
$var(partition) = "default";
$var(id) = 10;
dp_translate("$var(partition):$var(id)", "$avp(src)/$var(y)");
xlog("translate to var $var(y) partition $var(partition)")
...
It will update the translation rules, loading the database info.
Name: dp_reload
Parameters: 1
table_name - Partition to be reloaded. If no table is specified, the table specified in the "partition" parameter (default "default") will be reloaded.
MI DATAGRAM Command Format:
:dp_reload: _empty_line_
It will apply a translation rule identified by a dialplan id and an input string.
Name: dp_translate
Parameters: 2
[Partition Name:]Dialplan ID - The dpid of the rules used to match the input string. The table name can be ommited. The default table is dialplan.
Input String
MI DATAGRAM Command Format:
:dp_translate:
dpid
input
_empty_line_
The modules requires one table in OpenSIPS database: dialplan.The SQL syntax to create them can be found in dialplan-create.sql script in the database directories in the opensips/scripts folder. You can also find the complete database documentation on the project webpage, http://www.opensips.org/html/docs/db/db-schema-devel.html.